roll forming machines used for sale

Roller shutter parts galvanized shaft approx. 120x80 cm diagonal, granulator parts GETECHA GRS 126-A.149, steel parts

well functioning, equipped with: pin 35mm tension, mechanical support leg, control box, stabbing pick-up, Trelleborg 600/55-26.5 tires, foil wrapper, output with support wheel, LED lighting, lubrication system, Auction-ID: A1-40135-29

Size per roll 1200x4100 mm, on pallet, + batch of insulation boards various thicknesses Auction-ID: A1-45866-15

Equipped with bucket, forks, work lighting. Concerns a well-functioning shovel/wheel loader Auction-ID: A1-40135-393

3-row layout Output up to 3,000 pieces of SQUARE or ROUND rolls p/h Weight range for square rolls approx. 40 – 150 g/piece Weight range for round rolls approx. 40 – 85 g/pc (incl. knitting drum 55/80gr) completely stainless steel clad with TOUCH computer control incl. div cutting rollers incl. 3 stamps / + # + sun with humidification and turntable sprinkling station Application: e.g. rustic rolls, shaped rolls, round rolls Ciabatta, cobbler's boys, mini baguette, etc...

\"Roller width: 220 mm Min. height: 10 mm Max. height: 120 mm Infeed table: 1800 mm Outlet side: Disc roller tracks: 1800 mm \"Accessories: 2 new rollers\" Auction-ID: A7-45983-24

Auction-ID: A1-45889-2835

Packaging box for Gilnhammer boards made of OSB 2.50 m x 0.6 x 1.22 m For 15 plates Without castors Auction-ID: A1-45889-2902

\"2 fixed roller conveyors 1500 mm long 250 mm wide 8 rolls each Roll diameter 80 mm\" \"In addition: 2 manual turntables, length: 1300 mm each 8 roller conveyors with a length of 1300 mm, a roll diameter of 50 mm, a roller diameter of 50 mm. Auction-ID: A7-45983-61

\"Roller width: 200 mm Min. height: 10 mm Max. height: 120 mm Infeed side roller conveyor: 3000 mm long Outlet side disc rollers: 3000 mm long\" \"Accessories: 2 new rollers\" Auction-ID: A7-45983-22

without roller board Auction-ID: A1-45889-2912

Shelf wood, foldable, safety castors with lock, without carpet Auction-ID: A1-45889-105

Length: 3000 mm Width: 550 mm Height: 850 mm Roll diameter: 50 mm Number of roles: 15 pcs.\" Auction-ID: A7-45983-62

\"Working height: 500 mm Roller conveyor width: 900 mm Diameter of the rotary table: 1900 mm\" With PLC control Siemens (Simartic); Attention, years without electricity; Has only worked at 2 fairs; The stand was tilted for transport. (is intended for transport). Can be erected \"normally\" in just a few simple steps Auction-ID: A7-45983-91

Length:3m Width: 300mm Height adjustable: 800-1000mm Roll diameter: 50mm Number of rolls: 12 Auction-ID: A7-45983-65

\"Roller width: 220 mm Min. height: 10 mm Max. height: 120 mm Infeed table: 1800 mm long Outlet side disc roller conveyor: 1800 mm long\" \"Accessories: 2 new rollers\" Auction-ID: A7-45983-23

\"Length: 5900 mm Width: 550 mm Height: 850 mm Roll diameter: 50 mm Number of Wheels: 19\" Auction-ID: A7-45983-64

Roll width: 500mm Length 3m Working height: 850mm Roller diameter 90mm 15 Rolls Auction-ID: A7-45983-60

Auction-ID: A1-45889-2836

: neu : ca. 8 Wochen ab Auftragse : Deutschland : 3212 € : 3000 mm : 820 - 940 mm : 300 kg/m : 350 mm : 63 x 3 mm : 15 mm : 2600 mm : 250 mm with mm-scale and magnifier on stop carriage rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.665,- 4 meter € 4.077,- OPTIONS: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 515,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 119,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUEST. (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T

Qty. 1 Second-hand Reversing 4-Hi Cold Rolling Mill Mfc.: NKMZ, ABB, Grip Engineering, Launer Engineering Built: 1972 Type: Reversible Cold Rolling Mill (Quarto-1800) The cold rolling stand has been modernized by ABB in 1995. The mill was fitted with automatic gauge control (AGC), flatness control unit (AFC), spot cooling system (by Grip Engineering), and work roll changing device (by Launer Engineering). Besides, the mill has been equipped with a horizontal rolling Oil filtration system (by Launer Engineering). Flatness & AGC control: available /1995

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-45901-656

Tank capacity 2.5L; vibrations 5500r/min; 16L water tank; manual; unused; 6531 Auction-ID: A1-45901-6

Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station

BOMAG BW 174 – Tandem Roller General data: Manufacturer: BOMAG Model: BW 174 (AP-5 / APO-5 series) Product identification number: 101870531399 Operating hours: 8342 h Machine type: Pivot-steered tandem roller Weight: approx. 12000 kg Dimensions (L x W x H): 4420 x 1860 x 3050 mm Technical details: Working width: 1680 mm Drum diameter: 1220 mm Description: Industrial tandem roller designed for compaction of asphalt and soil surfaces. The pivot-steered design ensures excellent maneuverability and even compaction results, making the machine suitable for road construction and infrastructure projects. Auction-ID: A7-46062-9

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Roller mounting support compatible with BT-40 and HSK63 cones. Features a bidirectional roller engagement mechanism, allowing secure tightening of the tool holder on the flange. Enables convenient assembly and disassembly of tools or accessories on the cone. The ATT0004 design ensures complete protection of the cone by eliminating any direct contact with the support structure. The base includes pre-drilled holes for secure anchoring to a workbench, enhancing stability during use. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 120 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-54

1x (5000x1300x800 mm) and 1x (5200x1400x570). Glass beads not included Auction-ID: A1-43429-63

10 UNITS/SETS OF ATT0004 PACKED TOGETHER. A SINGLE ATT0004 CORRESPONDS TO: Roller mounting support compatible with BT-40 and HSK63 cones. Features a bidirectional roller engagement mechanism, allowing secure tightening of the tool holder on the flange. Enables convenient assembly and disassembly of tools or accessories on the cone. The ATT0004 design ensures complete protection of the cone by eliminating any direct contact with the support structure. The base includes pre-drilled holes for secure anchoring to a workbench, enhancing stability during use. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 120 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x ATT0004 PACKED TOGETHER: 210 x 1200 x h120 mm - 20 kg. PACKAGING WILL BE PERFOR ...

Consisting of roller conveyor with 6 fans (7100x800x1700 mm) and transfer station (6100x4000x1600 mm) with 2 fans above and 3 fans below Auction-ID: A1-43429-13

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

Roller mounting support compatible with BT-40 and HSK63 cones. Features a bidirectional roller engagement mechanism, allowing secure tightening of the tool holder on the flange. Enables convenient assembly and disassembly of tools or accessories on the cone. The ATT0004 design ensures complete protection of the cone by eliminating any direct contact with the support structure. The base includes pre-drilled holes for secure anchoring to a workbench, enhancing stability during use. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 120 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-97

Roller conveyor (6700x700x1000 mm) cross feed (6700x1800x940 mm) Auction-ID: A1-43429-43

The cultivator is in used but working condition. Approximate working width: 4.5 m Auction-ID: A3-43520-34074

Agricultural roller with tyres, ideal for soil consolidation after sowing or tillage. Equipped with multiple rows of tires allowing for good leveling and excellent soil-to-seed contact. Simple, robust and efficient machine. Auction-ID: A3-43520-38020

Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43519-16521

10 UNITS/SETS OF ATT0004 PACKED TOGETHER. A SINGLE ATT0004 CORRESPONDS TO: Roller mounting support compatible with BT-40 and HSK63 cones. Features a bidirectional roller engagement mechanism, allowing secure tightening of the tool holder on the flange. Enables convenient assembly and disassembly of tools or accessories on the cone. The ATT0004 design ensures complete protection of the cone by eliminating any direct contact with the support structure. The base includes pre-drilled holes for secure anchoring to a workbench, enhancing stability during use. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 120 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x ATT0004 PACKED TOGETHER: 210 x 1200 x h120 mm - 20 kg. PACKAGING WILL BE PERFOR ...

Serial number: 223084 max. sheet width: approx. 1000 mm with mechanical hand lever operation Auction-ID: A7-46287-193

Working width: 350mm, Working height: 900mm. Including: landing stairs Auction-ID: A1-43429-4

1x Cotron (5000x1250x550) and 1x Weidner (4950x1350x500) Auction-ID: A1-43429-44

It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)

1360 kg

2 weighing scales with Systec indicators and roller conveyors, maximum weight: 60 kg, minimum weight: 400 g, e= 20 g, plastic rollers, roller width: 520 mm and 430 mm, total dimensions: 1200 mm x 800 mm x 1980 mm.

2 Celectric accus with roller conveyors, type: (2x) 14/4 PzB 260, 24 V, capacity: (2x) 260 Ah, dimensions: 900 mm x 800 mm x 900 mm.

- Tested and cleaned Bread roll system - For round or elongated products mobile Stainless steel clad digital control Working width 600mm consisting of: Head machine type K4 Weight range up to approx. 110gr Direct settling device for baking trays or proofing carriers with long-rolling station Trigger length adjustable 60/40 or 60/80 or 60/100cm

Rollfix 120/300 – MW s.r.o., 230V, 120W Electric Rolling Screen MEDIUM Rollfix Auction-ID: A7-46320-41

Viewing by appointment Specification Value Type Vibratory Pneumatic Tire Roller Operating weight 8,500 kg Max. ballast weight 9,100 kg Power 77 kW / 103 hp Speed max power 1600 rpm Drive Hydrostatic, AWD Speed up to 9 km/h Climbing ability 38% Working width 1960 mm Total width 2200 mm Total length 4540 mm Altitude (ROPS) 2995 mm Wheelbase 3000 mm Ground clearance 285 mm Fuel tank 130 litres Hydraulic tank 65 litres Water tank spray system 600 litres Tire configuration 3 front / 4 rear Tire size 17/70-20-12PR Auction-ID: A1-43890-32

consisting of 10 parts, different lengths; height adjustable from 700-1100 mm; roll spacing h.o.h. 100 mm; Auction-ID: A1-41994-109

16 parts in various sizes, total length approx. 32 meters Auction-ID: A1-41994-110