roll forming machines used for sale

: gebraucht : 2892E : China : 450 € : 1 : 125 mm : 45 mm : 100 mm : 29 kg MINT CONDITION 2 axes machine vice for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2004 : 4540 : ca. 2 Wochen ab Auftragse : Österreich : 19900 € : 1 : 63 - 3150 (18) U/min : 700 x 500 x 500 mm : 900 x 500 mm : 6.6 kW : 2150 mm : 2220 mm : 2120 mm : 2550 kg : 500 kg : 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 3620 € : 38 mm : 245 mm : 300 mm : 320 mm : 23 kg : 19 cm³ : 38 x 1,5 mm : 38 x 1,5 mm : 35 x 3 mm : 30 x 2 mm : 35 x 1,5 mm : 42 x 1,5 mm : 42 x 1,5 mm : 50 x 2 mm : 50 x 2 mm : 50 x 4 mm : 20 mm : 10 x 25 mm : 25 x 20 (stehend), 25 x 1 mm : 180 mm : 36 mm : 10 mm : 2,8 U/min : 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 € : 1948.59 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 124480 € : 2352.67 € : 1015 mm : 600 mm : 1.000 x 400 mm : 1.000 x 400 mm : 1100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turci ...

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 € : 193.73 € : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : M24 : 665 mm : 640 mm : 2100 mm : 260 kg : Automatisch 0,10 - 0,20 - mm/U : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 665 x 400 mm : 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Incl. following optional equipment: lighting equipment coolant equipment and machine base with T-slots (symbol photo) OPTION (PRICE ON REQUEST): reverse for tapping Time of delivery with options: approx. 8 weeks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25400 € : 485.14 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Syn ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8200 mm : 2 mm : 2 mm : 1.5 - 2 mm : 8 : 8 : 1000 mm fully automatic bending in two ways without the need to rotate the sheet hydraulic drive BMS MULTI-Touch with automatic depth stop powered rotary shear additional rail on the bending beam material support 2x foot pedal safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on reques ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2580 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13400 € : 257.28 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 € : 138.19 € : 30 mm : MK 3 : 250 mm : 245 - 4000 U/min : M25 : 400 mm : 655 mm : 1185 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 174688 € : 3301.6 € : 3 kW : Manueller Tisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3060 x 1530 mm : 3060 mm : 1530 mm : 140 mm : 3048 x 1524 mm : 160 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cut ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 € : 1 : 40 - 1.300 U/min : ISO 30 : 465 x 230 x 380 mm : 1000 x 280 mm : 2.2 kW : 1400 mm : 1300 mm : 2200 mm : 1120 kg : 90 ° : 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV &, Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 46000 € : 878.6 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3.7 kW : 3850 mm : 1700 mm : 1860 mm : 3900 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 71500 € : 1351.35 € : 4200 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 5450 mm : 2200 mm : 1900 mm : 5350 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

Max. format: 510 x 305 mm Min. format: 110 x 95 mm - Single-up or double-up production - Automatic double banding system - Format recognition - Product separation/spreading - Automatic waste sheet rejection - Pressing station - Shingled stream and single-sheet operation - Air blast system (blower air)

- Round pile feeder RFH-56 - Automation Kit Feeder (Touch Screen) - Control unit ACC 2.4 - 1. Station with 6 buckles - 2. Station with 4 buckles - Gate fold - SBP-66+MKE-VE delivery

Key data: 210 mm, 305 mm, 5000 1/min

12-station turret (non-driven) Tool holder MK 3 Chip conveyor Rod Feed Pipe IRCO DS 34.8 (YOC 2013) Dimensions LxWxH: - Machine 4000 x 1700 x 1700 mm - Feed pipe 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Key data: 400 mm, 200 mm, 10

1-- 4-axis CNC-controlled gear grinding machine for cylindrical, straight-toothed involuted and special tooth systems. Make: Höfler Model: Promat 400 Year of Make: 2000 The grinding wheel is profiled with an integrated CNC dresser. Technical data: • Max. wheel diameter 240-400 mm • Max. grinding wheel width 30 mm • Nominal power grinding wheel 15 kW • Max. cutting speed 60 m/sec • Module: 0.5 - 10 • Max. tooth width 200 mm • Max. working stroke 210 mm • Workpiece carrier stroke speed 6,000 mm / min • Number of teeth freely selectable • Number of controlled axes: 4 (machine) + 2 (dresser) • Max. table load 100 kg • Total connected load 30 kVA • Weight of the machine approx.: 9 to.

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1025 kg, includes format parts for parts for ampoules 1+2 ml. (ø 10.75 mm), 3 ml. (ø 12.75 mm) 5 ml. (ø 14.75 mm) and 10 ml. (ø 17.75 mm) and vials 8R (ø 22.00 mm) & 20R (ø 30.00 mm)

Key data: 4200 kN, 527 g/PS, 70 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit

Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Including tripod can be moved

Control Fanuc ... 0i-TF Plus Max. workpiece diameter ... 3000mm Clamping table surface ... 2800mm Max. table load ... 18000kg Max. workpiece height ... 1800mm Axis Z ... 1250mm Plunger cut ... 320mm Number of positions in the tool changer... 12 Main engine power ... 75kW Machine weight... 40000kg Table speed ... 1-100/min The machine has undergone a complete overhaul. More info on request. - New hydraulic power unit - New electrics - New control cabinet - new warehouses - New paint job - New linear guide - New cooling system - Chip conveyors - CE - Documentation

B&A REF:  9228 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1266 STROKE VOLUME:  1346CM3 INJECTION PRESSURE:  1660AR PLATEN SIZES:  990 X 990MM DBTB: 680 X 680MM MIN MOULD HEIGHT:  260MM MAX MOULD HEIGHT: 680MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1330MM EJECTOR STROKE:  180MM CONTROLS: KEBA CORE PULLING: 2 AIR VALVES:  2 MOTOR: 45 HEATING CAPACITY: 18.5KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9330 TON: 1600 SCREW DIAMETER:  175MM SHOT WEIGHT: 16042 STROKE VOLUME:  17438CM3 INJECTION PRESSURE:  1843AR PLATEN SIZES:  2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT:  700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE:  2700MM MAX DAYLIGHT:  3400MM EJECTOR STROKE:  350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO  SCREW DRIVE:   ELECTRIC

B&A REF:   9320 TON: 610 SCREW DIAMETER:  90MM SHOT WEIGHT: 2576 STROKE VOLUME:  2831CM3 INJECTION PRESSURE: 1548AR PLATEN SIZES:  1270 X 1270MM DBTB: 850 X 850MM MIN MOULD HEIGHT:  300MM MAX MOULD HEIGHT: 1000MM MOULD OPENING STROKE:  930MM MAX DAYLIGHT:  1930MM EJECTOR STROKE:  350MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 38KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

B&A REF:  9271 TON: 800 SCREW DIAMETER:  110MM SHOT WEIGHT: 4720 STROKE VOLUME:  5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES:  1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT:  400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE:  1080MM MAX DAYLIGHT:  2180MM EJECTOR STROKE:  350MM CONTROLS: TACTUS  CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY: 37KW ROBOT: STYRAM S10-L SERVO SCREW DRIVE:  ELECTRIC

KEYENCE WM-3000 Mobile 3D Coordinate Machine KEYENCE WM-C3000 Camera System KEYENCE WM-P3000 Handheld Gauge Tripod Laptop with installed software (license status unknown) Charger 3 batteries Transport bag Instruction manual Multiple probes/styluses Calibration and reference accessories 3 Kanetec magnetic feet Other accessories according to photo documentation Technical data Manufacturer: KEYENCE Model: WM-3000 Camera Unit: WM-C3000 Hand-held measuring device: WM-P3000 Mobile 3D optical coordinate measuring system USB and power connectors available Serial number: 4B0N000108 Condition Used Well-groomed overall visual impression Usual signs of wear due to age and use No obvious damage recognizable Completeness according to photos only Auction-ID: A1-48287-10033

Marel MS2730 Filleting Machine with Back Bone Trim, High-performance automatic salmon filleting machine, Available from August / September., This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition., Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor., Key Features, - Automatic salmon filleting machine, - Equipped with Back Bone Trim, - High fillet yield and excellent cutting accuracy, - Automatic adjustment to varying fish sizes, - User-friendly touchscreen control, - Hygienic stainless-steel construction, - Easy access for cleaning and maintenance, - Co ...

Used industrial machine offered by IBEXTRA.

Presse à injecter NEGRI BOSSI 850T Vector type V850-6500 Année : 2007 Nombres d’heures : 44 000 heures Force de verrouillage : 850 T Diamètre vis : 100 mm Volume injectable : 3925 cm3 Pression d’injection : 1670 bars Dimensions des plateaux : 1670 x 1580 mm Distance entre colonnes : 1140 x 1020 mm Course d’ouverture : 1200 mm Epaisseur moule mini : 400 mm Moteur de dosage électrique Interface robot

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm turning speeds: 25 - 2000 U/min turning speeds: 18 Stufen spindle taper ISO: 40 SK quill stroke: 100 mm table:: 320x1000 / 450x950 mm table load: 125 kg feed range: 5 - 600 mm/min feed: 18 Stufen rapid traverse: 1200 mm/min total power requirement: 5,4 kW weight of the machine ca.: 1780 kg. range L-W-H: 1800 x 1500 x 1780 mm From a training workshop - good condition () Commissioned in April 2017 Features: - 3-axis digital display - Ball screws on the X and Y axes - Rapid traverse in all 3 directions - Electromagnetic brake for spindle stopping - Coolant system - Chip tray - Vertical milling head with quill adjustment Milling head rotation 90° ISO 40 tool holder - Fixed box table 950 x 450 mm Number/size of T-slots: 7 / 14.0 mm T-slot spacing: 63 mm Minimum distance between base table and spindle axis: 163 mm - Machine light - S ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 € : 1056.51 € : 3100 mm : 9 mm : 8 mm : 7 mm : 7 mm : 5 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1470 mm : 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 € : 173.12 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : 380 mm : 600 mm : 2060 mm : 260 kg : 100 mm : 170 - 660 mm : 1.216 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292500 € : 30 to : 3000x1500 mm : 3000 mm : 1500 mm : 70 m/Min : 60 m/Min : 120 m/Min : 40 mm : 1200 1/Min : 325 1/Min : 2800 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 28 : 0,1 mm : 0,05 mm : 22 U/Min : 150 U/Min : 200 kg : 940 mm : 6 bar : 88.9 mm : 15 kW : 180 l : 6650 mm : 7650 mm : 6300 mm : 8300 mm : 2310 mm : 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50, ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 872.87 € : 2035 mm : 6.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm : 1.5 mm : 2 mm : 1.5 - 2 mm : 3 : 3 : 1000 mm Fully automatic bending in two ways without the need to rotate the sheet Hydraulic drive BMS MULTI-Touch with automatic depth stop Powered rotary shear Additional rail on the bending beam Material support 2x foot pedal Safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment) the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on requ ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm : 1.5 mm : 2 mm : 8 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS millmeter precise adjustment of the clamping beam BMS MULTI-Touchcontrol electric powered rotary shear electronic depth stop flexible material supports inclined bending beam optimized geometry of the clamping beam safety equipment accoring to the control rules BG Germany 3 year warranty on stands and tension arms. Quality Made in Germany. FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST. OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles and narrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on request Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with Modul ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119880 € : 2265.73 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 3160 mm : 2450 mm : 2080 mm : 3400 x 2200 x 2530 mm : 4000 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 3.9 kW : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 € : 1067.85 € : 3100 mm : 6.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 2050 mm : 6800 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 € : 1086.75 € : 4010 mm : 2 mm : Hydraulisch : 135 ° : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 € : 958.23 € : 1 : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.