roll forming machines used for sale

WITHOUT tools and clamping devices Gearbox defective, feed gears can no longer be shifted Output via goods elevator Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-17

Auction-ID: A1-47350-12

Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorToolchanger with twin-grippertoolchanger with twin-gripperType of magazine ChainNumber of tools 40CabineFull protection cabinPackage Mill / Turn 20,000 rpm, H ...

x-travel: 500 mm y-travel: 300 mm z-travel: 400 mm Spindle Speed: 32-1.600 UpM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 mm : 30 - 765 U/min. bore stroke: 180 mm throat: 350 mm table surface area: 720 x 560 mm machine weight ab.: 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1988 : 090151 : prompt, Zwischenverkauf v : Italien : 12800 € : 1 : 42 mm : 4665 mm : 800 mm : 1160 mm : 1470 kg : 42 x 2,5 mm : 40 x 1,2 mm : 30 x 40 x 1,7 mm : 40 x 30 x 1,3 mm : 255 mm : 22 mm : 180 ° : 90 °/s : 5.5 kW : 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you ma ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 € : 996.03 € : 2550 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4800 mm : 1600 mm : 1470 mm : 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: gebraucht : 2416 B : China : 180 € : 1 : 140 mm : 50 mm : 147 mm : 15 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2891C : China : 250 € : 1 : 200 mm : 63 mm : 160 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 6130 € : 118.31 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kW Table dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 m The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. The system consists of the following components: Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production times Encapsulated cutting room with protective glazing CNC graphics control Siemens Sinumerik 840D Laser source Brilase or IPG Cutting head with automatic focus adjustment, Durma or Precitec Cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 138.96 € : 4 mm : 200 mm : 300 nm : 4 Stk. : 126 mm : 10 1/min : 1475 mm : 550 mm : 1200 mm : 460 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE (PRICE ON REQUEST): Version HIBKS 4,0 with hydraulic top roll adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080200 : prompt, Zwischenverkauf v : Türkei : 6550 € : 126.42 € : 1 : 1250 mm : 1.25 mm : 0.8 mm : 2 mm : 150 ° : 500 mm : 200 mm : 1500 mm : 750 mm : 1715 mm : 315 kg : geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 39000 € : 744.9 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 52900 € : 999.81 € : 3100 mm : 4.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 1950 mm : 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51100 € : 965.79 € : 3100 mm : 3.5 mm : Hydraulisch : 135 ° : 4300 mm : 1770 mm : 1890 mm : 4520 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 2.5 mm : 160 mm : 250 nm : 4 Stk. : 96 mm : 13 1/min : 1475 mm : 550 mm : 1200 mm : 320 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE (PRICE ON REQUEST): HIBKS 2,5 with hydraulic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 550 x 430 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 35 mm - Screw length L/D: 17.3D - Dosing stroke: 140 mm - Screw speed: 20 – 480 rpm - Moulding volume: 135 cm³ - Injection pressure: 1,065 bar - Increased injection pressure: 1,620 bar - Heating power: 6.8 kW - Number of heating zones (including nozzle): 4 Clamping unit: - Maximum clamping force: 450 kN - Platen dimensions: 550 x 330 mm - Extended clamping plates: 550 x 430 mm - Minimum mould installation height: 180 mm - Maximum plate spacing: 530 mm - Opening stroke: 350 mm - Control system: EC 100 Drive: - Pump drive power: 11 kW - Approx. weight: 3,300 kg - Dimensions: 3,300 x 1,200 x 1,800 mm Current oper ...

clamping force: 4.000 kN injection volume: 2480 cm³ screw diameter: 90 mm platen size: 1.300 x 1.080 mm Condition: second-hand, Specification: Horizontal injection moulding machine Injection unit: - Screw diameter: 90 mm - Injection volume: 2,480 cm³ - Maximum shot weight: 2,232 g - Injection pressure: 1,360 bar - Increased injection pressure: 1,600 bar - Heating capacity: 64 kW Clamping unit: - Max. clamping force: 4,000 kN - Clamping plates: 1,300 x 740 mm - Extended clamping plates: 1,300 x 1,080 mm - Minimum mould installation height: 350 mm - Maximum platen spacing: 1,300 mm - Opening stroke: 950 mm - Core pull unit: 2-stage on BAP - Control system: EC 100 Drive: - Pump drive power: 55 kW - Weight (clamping side) approx.: 25,000 kg - Weight on injection side (approx.): 8,000 kg Discharge  ...

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Weinig Profimat 23 automatic planer and moulder for four-sided planing and profiling of wood, including a set of planing heads. Spindle 1: Bottom / 4 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 4 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tiltable up to: 90 Grad Motor output: 1,85 kW sanding width: 150 mm Wegoma Type 2400 edge sander for the precise sanding of straight and curved wooden edges. Its sturdy construction and powerful motor ensure a uniform finish with high material removal rate. Ideal for carpentry shops, furniture making, and interior finishing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 2.800 x 950 mm Motor output: 5,5 kW Width of sanding paper: 150 mm JOHANNSEN Type T 85 long-belt sander or belt sander for precise surface, fine, and intermediate sanding of solid wood, veneer, and large-format furniture components in joineries and interior finishing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mm Weight: 1500 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kolbus RB 462 + FM year 1995 back gluing and lining nipping and smashing press in production good condition

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t Number of spindles: 4 Drilling capacity in steel: 25 mm Spindle center distance: 475 mm Table size: 450 × 1,900 mm Spindle taper: Morse taper MT 4 Total power requirement: 10.2 kW Machine weight: approx. 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98600 € : 1863.54 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis ...

: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 € : 142.63 € : 1 : 1 : 14 mm : 30 ° : 9 U/min : 6 - 40 mm : 55 mm : 100 mm : 2600 mm/min : 2.2 kW : 589 mm : 541 mm : 320 mm : 65 kg bevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys bevelling of lower edge in inverted position standard shearing cutter for processing stainless/alloyed steel reversible spindle against stuck milling tool STANDARD SET ABM-14 beveller milling cutter for stainless steel cutter extraction tool tube bevelling shaft tube bevelling washer flat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mm hex wrenches: 5 / 6 mm user manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 € : 909.16 € : 3100 mm : 2.5 mm : Hydraulisch : 135 ° : 4300 mm : 1770 mm : 1890 mm : 4000 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197430 € : 3731.43 € : 1010 mm : 590 mm : 1000 x 400 mm : 1000 x 400 mm : 0 -25 m/min : 0 - 4000 mm/min : 0,001 mm : 450 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3675 mm : 4055 mm : 2480 mm : 6500 kg : 423 kg : 670 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 5.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with preci ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 € : 744.9 € : 2035 mm : 2.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 12 mm : 12 mm : 6.5 mm : 8 mm : 8 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear  ...

: gebraucht : 2006 : 5539 : prompt, Zwischenverkauf v : Taiwan : 55100 € : 1 : 49600 € : 1000 mm : 850 mm : 1000 x 610 mm : 1000 x 600 mm : 1000 mm : 5 - 25 m/min : 1250 mm/min : 3 - 32 (0,02) mm : 690 mm : max. 400 mm/min mm : 400 mm/min : 0.001 mm : 1450 1/min : 11 kW : 3.7 kW : 0.37 kW : 20,6 kW : 3700 mm : 4000 mm : 3250 mm : 4800 x 2830 x 2800 mm : 7400 kg : 1500 kg : 1120 kg : 1500 kg : 355 x 75 x 127 mm Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel withgrinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH NEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WH ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5020 mm : 1.5 mm : 2 mm : 1.5 mm : 6 : 6 : 1130 mm : 180 mm : 915 mm : 4 kW : 6200 mm : 1435 mm : 1980 mm : 3200 kg : 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 73990 € : 1398.41 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 350 mm : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247810 € : 2100 mm : 850 mm : 2000 x 600 mm : 2x 1000 x 600 mm : 0 - 20 m/min : 0 - 5000 mm/min : 0,001 mm : 685 mm : 0 - 2000 mm/min : 0.001 mm : 675 mm : 500 - 2200 1/min : 11 kW : 7710 mm : 3320 mm : 2850 mm : 6530x3200x3350 mm brutto mm : 10200 kg : 900 mm : 1240 kg : 2000 kg : 405 x 50 x 127 mm : 3,1 / 3,1 kW : 7.5 kW : X: 0,008, Y/Z: 0,005 mm : X: 0,006, Y/Z: 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitud ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6200 mm : 1.5 mm : 2 mm : 1.5 mm : 7 : 7 : 1130 mm : 180 mm : 915 mm : 4 kW : 7380 mm : 1435 mm : 1980 mm : 3700 kg : 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 € : 1 : 2040 mm : 3 mm : 2 mm : 4.5 mm : Motorisch : 1.5 kW : 1.1 kW : 3060 mm : 1650 mm : 1500 mm : 2730 kg : 750 mm : 140 mm : 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5", color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 61800 € : 1168.02 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5020 mm : 1.25 mm : 2 mm : 1.25 mm : 5 : 5 : 1130 mm : 180 mm : 915 mm : 3 kW : 6200 mm : 1435 mm : 1980 mm : 3000 kg : 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 17100 € : 328.32 € : 200 mm : 4 - 6 mm : 2 - 3 mm : 30 1/min : 30 - 140 ° : 4 kW : 900 mm : 1150 mm : 1240 mm : 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.