roll forming machines used for sale

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 € : 207.36 € : 35 mm : 137 mm : 137 mm : 3 : 1.1 kW : 7 m/min : 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm : 500 mm : 1250 mm : 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 € : 977.13 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111670 € : 2110.56 € : 400 mm : 500 mm : 400 mm : 225 mm : 400 mm : 50 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 2850 x 2000 x 2470 mm : 3450 kg : Dm. 355 x 38 x Dm. 127 mm : 0,001 mm : 1.7 kW : 2.4 kW : 10 - 150 1/min : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-400S with Smart iContro ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm : 25 mm : 25 mm : 16 mm : 20 mm : 18 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 € : 1 : 1580 € : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer’s item no.: 10121929 Clamping length: 130 mm Belt Slider: 82 mm Tube diameter: 90 mm spindle diameter: 40 mm length in total: 645 mm Complete milling spindles for Weinig machines, in like-new or reconditioned condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm swing diameter: 680 mm turning height: 600 mm z-axis: 500 mm x-axis: 560 mm drive of main spindle: 65/80 kW main spindle speeds:: 2800 workpiece tool changer: 12 Plätze feeds z-axis: 0,01-30.000 mm/min feeds x-axis: 0,01-45.000 mm/min chuck: Rota NCR 630 mm coolant: voltage: 400 V frequency: 50 Hz control: Siemens 840 D pl chip conveyor: kW total power requirement: 140 A weight of the machine ca.: 18 t dimensions of the machine ca.: 6,5 x 3,8 x 4,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corner punch, cleaned and tested. Punching tool No. 7

Wood Her Sprint 1317 Heavy version - edge thickness 0.4 - 8 mm PLC Screen Control Infeed ruler via PLC Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-50 mm Glue height adjustment Printing unit pneumatic Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit 1942 MOT2 flush milling 8 mm, radius milling - chamfer milling - 15° Scraper unit for chamfers and radii with 2 scraper carriers Shape milling unit 1832 Rounding of corners up to edge thickness 3 mm in continuous flow pneumatic engagement and disengagement Surface Scraper Unit – Finish Machine is FUNCTIONAL in GOOD CONDITION Brokerage Sales Carpentry  ...

1 x Polar Autocut 25 XT automatic cutter 1 x Polar DC-System die-cutter 1 x Polar BD single station bander

Rotary Die Cutter Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator

Trumpf trulaser 3030

IDEAL 7260 Pile Cutter, Year 2019 electric, cutting length 720 mm, cutting height 80 mm, automatic pressing, programmable back gauge, Light barrier, air table, Made in Germany.

Key data: 298 mm, 572 mm, 4000 1/min

Inv. Num. : 9320 Type: ST 20Y Producer: HAAS Created: 2022 Parameters: Switch-on hours: 1565 h Operating hours: 236 h Max. turning length: 572 mm Maximum turning diameter: 298 mm Grinding diameter: 533 mm Maximum length of travel in the X-axis: 213 mm Maximum length of travel in the Y-axis: 51 mm Maximum feed in the Z-axis: 572 mm Maximum spindle speed: 4000 1/min Maximum main spindle power: 14.9 kW Max. rod diameter: 64 mm Lathe chuck diameter: 210 mm Spindle bore: 88.9 mm Weight: 4754 kg

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Composed of: Giuseppe CARCANO Tester Grinding machine Grinding machine Plastic hole drilling machine Electa Lapidello Automatic lathe Delta LC400 Lapidello Metal shelving Casting oven Grinding machine Grinding machine Grinding machine Automatic leveling machine Vertical drill CECCATO Screw Air Compressors with Tank, Filters and Dehumid ...

Little used, including spare filter Auction-ID: A1-48530-790

Auction-ID: A1-48530-2570

number of needles 1632 The 2014 Terrot S2112-2 is a highly specialized, industrial high-speed single-jersey circular knitting machine manufactured by Terrot, a premier German textile machinery company. Key Features & Capabilities - Machine Type: Single Jersey (Plain & Structured fabrics). - High-System Density: The "112" in the name relates to its ultra-high feeder configuration. It features an impressive 3.7 feeds per inch of diameter. For example, a standard 30-inch diameter version of this machine would pack roughly 110+ yarn feeders, allowing it to knit fabric incredibly fast. - Open-Width Frame: This model is designed to slit and roll the fabric out flat rather than collecting it as a compressed tube. This eliminates center creases entirely, preserving the absolute highest fabric quality. - What It´s Best For: It is heavily favored for high-efficiency production of premium elast ...

turning diameter: 176 mm turning length: 570 mm swing diameter: 510 mm working diameter: 420 mm travel -z axis: 570 mm travel -x axis: 245 mm spindle bore: 43 mm diameter of quill: 85 mm quill stroke: 120 mm Spindle Speed: 60-6.000 U/min. rapid power traverse in X-and Z direction: 24 m/min total power requirement: 5,5 kW control: MSG-805 V weight of the machine ca.: 3.400 kg dimensions of the machine ca.: 2000x1700x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 45 mm turning length: 50 mm control: Mitsubishi FCA70LPC-V Spindle Speed: 8.000 U/min. travel -x axis: 180 mm travel -z axis: 200 mm rapid power traverse in X-and Z direction: 20 / 30 m/min weight of the machine ca.: 1.600 kg dimensions of the machine ca.: 1700x700x1700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290/300 mm y-travel: 330/340 mm z-travel: 150/160 mm total power requirement: kW weight of the machine ca.: 675 kg dimensions of the machine ca.: 2700 x 2500 mm The machine was overhauled by the company Harich in 2017. Machine number: 57330/08 Technical data: Table longitudinal movement (motorized/manual): 290/300 mm Spindle head transverse movement (motorized/manual): 150/160 mm Support vertical movement (motorized/manual): 330/340 mm Angle table clamping surface: 600 x 210 mm Spindle speeds: 40 – 2000 rpm Tool holder: Standard taper 40 Motor power: 1.5/1.9 kW Feed rate range (infinitely variable): 5 – 500 mm/min Rapid traverse: 1200 mm Equipment: 3-axis digital readout (Heidenhain) Vertical milling spindle with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Operating manual The machine will be loaded onto a Euro-pallet, total height: ...

All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Lot consisting of: Ghielmi - Forming press - 1995 Komage K15 Press Komage K15 Press Giacoletto Hydraulic press CIEM Hydraulic press Hydraulic press 350 Ton Hydraulic press 350 Ton GHIELMI Hydraulic press GATTI PGAS150 Hydraulic press 2000 CARCANO 60TON Hydraulic press Plastic drilling machine Hole filler Grinding machine Grinding machin ...

turning diameter: 40 mm turning length: 50 mm control: Fanuc 0i-TD Spindle Speed: 8000 U/min. travel -x axis: 180 mm travel -z axis: 200 mm rapid power traverse in X-and Z direction: 15 m/min weight of the machine ca.: 1500 kg dimensions of the machine ca.: 1500x700x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 € : 171.77 € : 1 : 20 to : 185 mm : 200 x 12 mm : 480 x 1060 mm : 200 mm : 80 mm : 10 mm/s : 10 mm/s : 2.2 kW : 930 mm : 1150 mm : 480 mm : 1200 mm : 530 kg Programmable stroke and retraction point Adjustable speed and pressure Manual jog operation and automatic operating mode Holding pins and tools hardened and ground 3 holder pins Bending tool Manual stop 400 mm Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1350 mm workpiece width - max.: 160 mm weight of the machine ca.: 4000 kg Included: - Wet vacuum attachment - Replacement brushes - User manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 17300 € : 332.16 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 € : 3038.89 € : 3 kW : - : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 26,5 kW : 250 mm : 16 mm : 160 x 160 mm : 200 x 150 mm : 6000 mm : 58 kg/m : +/- 0,2 mm : +/- 0,05 mm : rund, quadratisch, rechte : 40 m/min : 94 m/min : 30 m/min : 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request The data for this ad was cr ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2792.28 € : 10 mm : B 16 : 220 mm : 250 - 3000 U/min : 0,45 kW : 320 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: gebraucht : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 32800 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.100,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle pro ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21300 € : 408.96 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: max. 320 mm workpiece height: max. 500 mm magnetic clamping plate: 300 x 605 mm horiz. table movement: longitudinal: man. max. 750 mm horizontal table movement: cross: max 340 mm table load: max. 420 kg sanding disc diameter: 355 mm grinding wheel width: 50 mm bore: 127 mm spindle turning speed range: 1500 U/min rapid traverse vertical: 400 mm/min Control: weight of the machine ca.: 2500 kg dimensions of the machine ca.: ca. 2800x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Inv. Num. : 9324 Type: 3000x2100 Producer: CYBERTRONIC Robotic Created: 2022 Parameters: Work table length: 3000 mm Work table width: 2100 mm Number of Spindles: 2 pieces The offer includes: Blower/suction unit Dust Extraction OP-2200 Piston compressor MK 103-90-3M PC and software for CNC control Cables Basic accessories

Key data: 600 kN, 132 g/PS, 35 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the ha ...

Key data: 1000 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290U injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the h ...

- Flat pile feeder - MBO Vacubelt - MPC Control - 4 buckles - 2 knives - 1 buckle at cross fold station - FA 46ME mobile Vertikal-Pressauslage (2007)

Used Trepko type 821 butter cube packer.

Fully automatic slicer Bizerba VS 12 D, Connection 230V, year of construction 2004, Dimensions LxWxH approx. 82x60x50cm, weight approx. 73kg, good used condition, fully functional

Electric hand-held machines 5 pcs., cordless impact wrench, cordless angle grinder, cordless rotary hammer, hand-held circular saw, hand-held mixer

SCHNEIDER MESSTECHNIK - WM1 5000 CNC - 2015 - Coordinate measuring machines Measurement software: Sapphire 7 - License status: unknown Instructions consisting of: a.o. Measuring machine with granite table Windows 7 Ultimate Measurement Calculator Control unit Monitor / Keyboard / Mouse Office table Transport dimensions approximately: (L x W x H) 1800 x 900 x 1850 mm Pick-up date: 12.08 - 14.08 Auction-ID: A1-48584-35

Incl. 2 vacuum plates, BUSCH RA 100 F 503 vacuum pump, platform trolley, dimensions (LxWxH) approx: 820x600x1035 mm Pick-up date: 10.08 - 11.08 Auction-ID: A1-48584-5

Type: FU1000 Number: 67031 Wheel diameter: 335 mm Power: 7/10 HP Equipment: Magnetic table and sprinkler system Order: Remote control panel Status: Used condition with traces of oxidation and wear Additional information: Surface grinding machine with drip tray and hydraulic system and the set includes only the machine Additional information: : Disassembly and loading at the expense of the buyers Auction-ID: A1-48609-11

IXION TL 500 SVA Deep Hole Drilling Machine Manufacturer: IXION Model: TL 500 SVA Year of Manufacture: 1985 Serial Number: 113178 Origin: Germany Drilling Capabilities: Drilling diameter: 1.5 – 18 mm Advertised drilling depth: 600 mm Table and movements: Fixed table: 700 × 1,350 mm Circular tabletop: 1,000 × 500 mm Longitudinal stroke: 600 mm Stroke in the direction of drilling: 400 mm Swivel table: 180° Drilling unit: Vertical carriage stroke: 250 mm Unit orientation: ±15° Spindle Taper: CM3 Spindle and control: Number of speeds: 8 Speed range: 240 – 2,400 rpm CNC Control: Bosch Alpha Digital display: Heidenhain 3-axis Power and Size: Engine power: 1.0 / 1.6 kW Installed power: 10 kVA Dimensions (L × W × H): 2,000 × 1,500 × 1,800 mm Weight: approx. 1,350 kg Auction-ID: A1-48609-265

Power: N/C (electro-pneumatic system) Operating parameters: Workpiece length 250–2,500 mm; max. width 1,200 mm; automatic longitudinal + transverse feeding; electropneumatically controlled cross scale Workpiece capacity: Panels/components of varying dimensions; suitable for furniture & wood processing lines Supported edges: Wood-based panels, MDF, chipboard, plywood (typ.) Edge types: Feeding, positioning, transfer Included equipment: Fully automatic WZ10 pulling system; air cushion table; cross alignment scale; integrated control system Compliance: Industrial woodworking equipment; CE N/C Power supply: Electric + compressed air (electro-pneumatic) Year/Manufacturer: HOMAG – PROFI TBL 100/35/12 Remarks: Designed for automatic handling and precise positioning of workpieces in longitudinal and transverse direction Automatic feeding table with WZ10 system for ef ...

Model L 75, with grinding stations on both sides, tool supports and swivel/clamping devices. Auction-ID: A1-48591-19