129,467 used machines on RESALE, but how to find them? Machine Search
Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector
turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector
: 2500 mm plate thickness: 3 mm Bending Angle: 165 ° weight of the machine ca.: ca. 3.900 kg dimensions of the machine ca.: 4300x2400x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-5 mm Workingpiece thickness from to: 6-45 mm Total length: 4130 mm Feed speed: 11 m/min. total power requirement: kw Weight: 1250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 400 mm workpiece height: 350 mm table-size: 820 x 350 mm dist. center of grinding spindle - table: 140-525 mm table movement: 660 mm workpiece weight max.: 400 kg diameter / bore of grinding wheel: 350 x 50 x 76,2 mm table speeds: 2-28 m/min power capacity - grinding motor: 3,7 kW total power requirement: 8 kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2292.56 € : 10 mm : B 16 : 220 mm : 250 - 3000 U/min : 0,45 kW : 320 mm : 520 mm : 820 mm : 44 kg : 60 mm : 140 - 315 mm : 300 x 250 mm : 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : 162430 € : 3069.93 € : 1200 mm : 730 mm : 1200 x 600 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m/min Integrated ma ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 109480 € : 2069.17 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 4020 mm : 2450 mm : 2080 mm : 3400 x 2220 x 2530 mm : 3700 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 0,005 mm : 0,005 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...
Impressions=0 m, Condition= New , Availability= 2026-07-07, 16” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Panasonic servomotor. Siemens PLC. Italian balance valve.
Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment
Offer 26172 Technical data: - Brush diameter approx. 250 mm - Brush width up to approx. 55 mm - 2 Disc speed - Drive 400 V - Working height approx. 850 mm - Space requirement approx. W 650 x H 1300 x D 500 mm - Weight approx. 85 kg
Impressions=0 m, Condition= New , Availability= 2026-07-07, Servo Feeder Pre-Folding Section Side Gluing Crash Lock Bottom Bottom Gluing Unit (Left Side) Folding and Closing Section Motorized Trombone Section Folding and Closing Section Pressing Unit KQ” Brand 3 Cold Glue Guns Pneumatic Press LED Display Maximum Carton Weight: 800 g/m² Carton Type: B, N, E & F Flute Maximum Speed: 500 m/min Max. Folded Carton Thickness: 15 mm
Impressions=0 m, Condition= New , Availability= 2026-07-07, Max.Paper Size 600X420mm Min.Paper Size 280X233mm Max.Cutting Size 590X410mm Max.Cutting Speed 10000s/h/6000s/h(vision) Max.Pressure 180T Die-cutting Precision ±0.075mm Inside Chase Size 600X430mm Die Cutting Plate Size 600X420mm Height of Cutting Rules 23.8mm First Cutting Rule 8~16mm Min.Gripper Margin 9mm Max.Feeding Pile Height (incl.pallet) 900mm Max.Delivery Pile Height (incl.pallet) 800mm Thickness of Cardboard 80g/?~1000g/? Thickness of Corrugated Paper 0=2mm Total Power 10kw/12kw(vision) Weight 5T/5.5T(vision)
Impressions=0 m, Condition= Good , Availability= 2026-07-07, Description is coming
Impressions=0 m, Condition= New , Availability= 2026-07-07, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) DETAILS : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm
Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, Additional 3 knifes. Available: immediately
Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
Key data: 220 kN, 8 mm, 3050 mm
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.
Urban MaHa Manual Parting Machine as good as new for parting off welding beads on PVC window profiles Ideal for special window construction No leakage of the grooving knife, even with extremely long grooves Also suitable for V-fighters and interchangeable posts Universal for angles of 20° - 180° and elbow connections Special slide slide with swivelling groove knife holder Use of different grooving knives possible Variable, simple groove knife change of different groove variants Working on one side
Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...
Sheet width: 2000mm Sheet thickness: 2.25mm Stand width: 2040mm Total power requirement: 7.5 kW Weight: 1.5t Approx. space requirement: 2.2 x 1.7 x 1.1m Auction-ID: A1-48483-99
Especially for grinding for bumpers -> Liebherr/Lorenz/Gleason. Incl. coolant device -> mounting flange: max. 250 -> grinding wheel diameter: max. 240mm -> X-table stroke: max. 950mm -> Y-workpiece spindle stroke: 200mm Auction-ID: A1-48483-121
with accessories and undertable Year of construction approx. 1995 Wheel diameter 0-200mm Module min.-max.: 0.5 - 25 Auction-ID: A1-48483-81
Gear hobbing machine – vertical: Make: Pfauter Type: P 630 Year of manufacture: unknown Control type: conventional Technical details: - Condition good - Wheel diameter - max. 630 mm - Wheel width 375 mm - Module - max. 10 - Clamping table 550 mm - Table bore 125 mm - Milling cutter speeds infinitely variable 62 - 390 rpm - Mounting cone MORSE 5 - Axial feeds 0.40 - 6.80 mm/rev - Radial feeds 0.10 - 1.76 mm/rev - Distance between milling spindle and clamping spindle 50 - 425 mm - Tooth count range min. 8 - Milling cutter diameter x width 192 / 215 mm - Milling cutter displacement 200 mm - Main drive motor 7.5 kW - Total power requirement 21 kVa - Machine weight approx. 8.2 t Additional information: Equipment of Machine: - Universal milling head with tangential displacement - Pressure reducing valve for counter holder - Magnetic chip conveyors Auction ...
Hatz Diesel Forward -backward Widening plates Electrically strart Vibration plate has been checked and is in good working order Auction-ID: A1-41948-113
Welding transformer type RED 240 – ideal for reliable welding work in the workshop and industrial sector. With strong performance, solid construction and flexible Welding current adjustment range, this device offers everything for precise results. -> Primary: 230 / 380 V, 6.3 / 6.9 kVA -> Current Consumption: 27.5 / 15.5 A -> welding current: 26–150 A (40% ED) / 30–240 A (100% ED) -> open-circuit voltage: 62 V -> degree of protection: P22 – Cooling type S – Insulation class F Perfect for those looking for a reliable, durable and high-performance Search for a welding machine. Auction-ID: A1-48483-63
Droogscheider voor fijnstof Maximale luchtstroom: 7000 m³/uur 7,5 kW 12 filterelementen 93,8 filteroppervlak Afmetingen: 1800 x 1600 x 2700 mm Gewicht: 1430 kg
sheet width: 1550 mm plate thickness: 4.5 mm pre-bending: 4.0 mm roll length: 1550 mm min. dia.: ca. 190 mm roll diam. toproll: 140 mm bending speed: 3.0 m/min engine output: 2.2 kW weight: 1420 kg range L-W-H: 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller The data for this ad was created with Modul ...
x-travel: 700 / 710 mm y-travel: 275 mm z-travel: 350 mm taper in main spindle: ISA 40 table surface area: 900 x 250 mm T-slots: 3 x 18 x 60 Stk. turning speeds: 32.0 - 2000 U/min feed stepless: 15 - 750 mm/min voltage: 400 V total power requirement: 4.0 kW weight of the machine ca.: 1400 kg range L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 180.26 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.Nr. maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 42100 € : 804.11 € : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2450 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Friction Stir Welding Machine SW BA312, Year of Build 2022, Machine No. 2320024, with tool holder HSK 63
plate thickness: 6 mm blade length: 200 mm angle adjustable from - to: fest 90 Grad table surface area: 750 x 500 mm pressure: t total power requirement: 3,0 kW weight of the machine ca.: 0,62 t dimensions: 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Combined hole punching, profile steel shears, notching machine, sheet metal cutting machine Manufacturer: Peddinghaus Type Peddimaster 60/100 Cuts: Round steel 45 mm Square steel 40 mm Angle steel 120 x 13 mm Flat steel 500 x 12 mm Projection 510 mm Cutting area 500 x 12 or 400 x 16 mm Punching diameter 27 in 17 mm Punching diameter 39 in 12 mm Machine weight approx. 2,400kg
3D coordinate measuring machine Zeiss Duramax, built in 2021, S/N 188721, with base cabinet
Automatic labeling machine for top and bottom labeling of cans and jars. The system is designed for precise and efficient labeling in industrial production environments. Output: up to 120 labels/min.
There are 3 attachment mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 2. Manufacturer: Eirich Year of Make: 1974 Volume: 500l 3. Manufacturer: Eirich Year of Make: 1984 Volume: 500l 3 first layer mixers for sale (available from January 2027): 1. Manufacturer: Eirich Year of production: 1974 Volume: 500l 2. Manufacturer: Eirich Year of production: 1974 Volume: 500l 3. Manufacturer: Eirich Year of production: 1984 Volume: 500l
Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Touchscreen control pane ...
Professional pipe grinding machine from the renowned Dutch brand ALMI Machinefabriek B.V., type AL150, built in 2000. This machine has been specially developed for the accurate grinding of pipes and tubes for welded joints, so that a perfect fit is obtained for railings, construction work, machine construction and pipe constructions. The AL150 uses a grinding belt and features an adjustable clamp and adjustable stops, allowing for precise machining of tubes at different angles. Thanks to the robust industrial design, the machine is suitable for intensive professional use. According to the type plate, the machine operates at 400 V / 50 Hz, has a speed of 2,865 rpm and a dead weight of approximately 210 kg. Year of manufacture: 2000. The machine shows normal signs of use, including dust, light corrosion and superficial wear, commensurate with its age and professional use. A high-qualit ...
cutting range for steel to: 25 mm working range: 3000 x 1500 mm : 120 mm machine weight ab.: 900 kg Overall size: 3560x1960x1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lincoln Electric Red-D-Arc DX500e CC/HP DC Diesel Welder with up to 500 Amps. Equipped with Lincoln Electric wire feeder, MIG torch, electrode holder, ground clamp and patch cables. Compatible with MIG/MAG and MMA processes. Stand-alone unit with 115 V, 230 V and 400 V auxiliary sockets also allowing use as an electric generator. Built-in digital display and electronic welding current adjustment. Machine for intensive work in the workshop and on site. Shows normal signs of use Auction-ID: A3-46197-37077
maximum number of results exceeded
please refine your search
1.900 € 
