roll forming machines used for sale

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360041 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Factory New (Pictures partly similar)

Speed Finishing Device Processing of rollers, including for the paper, printing and steel industries. Machine Type: Speed Finisher Machine No.: 721615 Technical data Workpiece diameter 80 – 500 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Wide belt sander COSTA mod. AK-CCCT 1350 - CE rules - Working width 1350 mm - S/N A50729/RC1 - Year 2005

Chocolate wrappers,speed up to 60 packages per minute. Wrap the munchmellow with aluminum foil. Manual feeding. The machine has been fully serviced, the machine is in working order. Video of machine operation available

centre distance: 1000 mm turning diameter over bed: 420 mm turning diameter over bed slide: 235 turning length: 1000 mm spindle taper: DIN 55027 Gr. 6 control: MANUALPlus 4110 spindle bore: 51 mm turning speed range: 3 - 3000 U/min feed:: 5.000/10.000 mm / min drive capacity - spindle motor: 11 kW taper in tailstock-quill: MK 4 dia. of quill: 70 mm quill stroke: 110 mm coolant: ja/yes voltage: 400 V Number of working hours: 6.908 h weight of the machine ca.: 3 t dimensions of the machine ca.: 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder - ...

Top and bottom calibrating and sanding line COSTA Line set up: - Bottom 3-group calibrating and sanding machine Costa mod. KB / CCT1350 Matr. 990616 / RC2 Roller diam. 400 mm - 22 kw Roller diam. 400 mm - 15 kw Sectioned cnc sanding pad - 11 kw - Top 3 groups calibrating and sanding machine Costa 3 groups Costa mod. K2 / TRCCT1350 Matr. 990616 / RC3 Roller diam. 400 mm - 22 kw Roller diam. 400 mm - 15 kw Sectioned cnc sanding pad - 11 kw - Device for short pieces - Vacuum device - Working width 1350 mm - Connection conveyor - CE rules (year 1999) - With CE declaration and manuals

Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours, Available Immediately, An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets., The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables., Included in this Offer, - Eillert G-1500 vegetable cutting machine, - Stainless steel preparation table, - Outfeed conveyor, - 3 interchangeab ...

max. wheel diameter: 0-200 mm max. module: 25 min. module: 0,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 40 mm max. module: 2 min. module: 0,1 workpiece length - max.: 665 mm weight: 4,5 t spindle bore diameter: 82,5 mm Control: Siemens total power requirement: 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 160 mm gear width: 355 mm max. module: 4,5 min. module: 0,5 centre distance: 450 mm total power requirement: 11 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation The data for this ad wa ...

sheet width: 1025 mm plate thickness: 1,50 mm pre-bending: diam. of the rolls ca.: 65 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Clockwise and counter-clockwise rotation via foot switch Safety pull-wire switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 7000 mm y-travel: 3200 mm z-travel: 1500 mm Control: Heidenhain TNC 530 table-size: 6000 x 3000 mm table load: - t spindle turning speed range: 6000 / 18000 U/min tool taper: ISO 50 / HSK 63 feed: 50000 mm/min spindle motor: 34 kW A-Axis: + / - 180 ° c-axis: 0-360 ° distance between columns: 4300 mm Passage height: 2300 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 12,2 x 9,3 x 5,9 m Equipped with: - Heidenhain TNC 530 CNC control - 1 milling head (TAEM) ISO 50, 6,000 rpm - 1 electric spindle head (TUPC) 18,000 rpm, HSK 63 - 1 extended head ISO 50, 6,000 rpm - 40-position tool changer (15x HSK A63, 25x ISO 50) - Coolant system (40 bar IKZ / 4 bar external) - CE mark - Enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

speed of feed:: 60 m/min feed:: 5 - 99.999,9 mm cuts max.:: -- Schnitte/m cross-section width:: 5 - 90 mm cross-section heigth:: 5 - 90 mm Condition: Second-hand, Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves • Material diameter approx.: 5–90 mm • Conveyed by two drive belts • Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel • Lower belt fixed, upper belt motor-adjustable • Belt contact length approx.: 500 mm • Contact width: 80 mm • With a maximum speed of approx.: 60 m/min • Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm • Cutting is performed by a servo motor: 1 kW • Power supply: 380/400V, 50Hz, 5kW • Material feed direction: from right to left • Weight a ...

x-travel: 800 mm y-travel: 700 mm z-travel: 700 mm Control: Wenzel max. workpiece weight: 300 kg accuracy: Renishaw SP 25 M Measurement inaccuray: 2,6 µm repeatability: 1,6 µm Longitudinal uncertainness: MPE: 3,5 + L/300 µm (standard) Longitudinal uncertainness: MPE: 3,5 + L/300 µm (extended) 0: 15 - 30 °C 0: 18 - 22 °C (standard) 0: 18 - 28 °C (extended) speed: Joystick 0 - 20 | 0 - 100 mm/s speed: CNC axis related 300 mm/s speed: CNC vectorial 520 mm/s Accelaration: CNC axis related 700 mm/s² Accelaration: CNC vectorial 1200 mm/s² total power requirement: - kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 3,38 x 2,2 x 3,0 m Documents: elektr. hand wheel: PC: Intel Core i7, 16 GB RAM Measuring Machine WENZEL - SF 87 - Renishaw FCR25-L6 Stand Alone Changer with 6 Storage Positions - Renishaw PH 10 M Probe - Wenzel WPC 2040 Path Control System - WM | Quartis M ...

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

APM HYDRAULIC GUILLOTINE SHEAR MACHINE MODEL: ATS 3012 SPECIFICATION: Cutting Length: 3200mm Cutting Capacity (Mild Steel) : 12mm Cutting Capacity (stainless steel): 6mm Cutting Stroke: 10-18 times Backgauge stroke: 600mm Cutting Angle adjustment: 0.5-2.5mm MAIN MOTOR: 15KW Machine weight: 10 ton Location: F39, TGE Kindly to contact: syweetopglove.com.my

Key data: 630 mm, 220 mm, 5 kW

Thickness planing machine Bäuerle Type: DM 63 Planing width 630 mm Planing height 220 mm 4 Knife Shaft Rotations of the knife shaft 5500 rpm Motor power: 5 kW Articulated feed roller 4 feed speeds 2 sliding rollers in the table Dimensions L 1400 x W 1200 x H approx. 1600 mm Weight 1180 kg

3 x Used EDM Machines chamilles Robofill 240 cc Year of manufacture 2003 Chamilles Roboform 35 Year of Make: 2004 Tool Changer Starting Hole Chamilles SD 1 Year 2003

Coordinate measuring machine for sale: The Video Check is built in 2004, has Windows XP with WinWerth V 7.32. The measuring range is 1000x650x600 A Renishaw PH10M is installed The device has 2 Z quills (1x zoom/1x button or laser) To be included in the package: - Bracket changer - Laserline - Pushbutton/probe - Screw compressor - Air pressure vessels - Documentation The device is in storage.

Milling machine MH1600 The basic machine was built in 1990 but was rebuilt from scratch in 2015 by the company MMD Bad Emstal, as well as control conversion to iTNC530 (Guideways sanded and scraped, KGT new or overhauled, bearings new, etc. etc..) (so the machine was new again in 2015) iTNC530 IKZ air and water through spindle center Rotoclear Chip conveyor SK 50 Chain 32 WZ Transport beam Crane loading possible Machine is provisionally connected to the power connection and can be visited by appointment

Semi-automatic slicer / slicer Bizerba Type: VS 12 A Technical data: 400 Volt / 50 Hz Year of Make: 2008 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth including original Bizerba knife sharpener with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine immediately ready for use Condition, see original pictures!

MAG 1 Head Capping Machine from Wine Plant MCA head and BVS head available Year of Make: 2001 Automatic sorting for MCA

- Display - Program - Air table - Resopal side tables with air - 1 Spare knife

This used SCHLATTER MG line was specially developed for the economical production of light and heavy standard bearing mats in medium and large series. The line wires are drawn directly from spools, while the cross wires are precisely straightened, cut to length and fed into the welding system from a large magazine. This concept enables fast changeover times and ensures maximum flexibility – a clear advantage when tapping into new markets. On request, and for an additional charge, the relevant straightening machines for the cross wires are available, as well as a comprehensive range of accessories, spare parts and a wear parts pack.

Code: 0423 Brand: ME.SA - ITALY Model: GT 60 S - CE Standard Chain and locks mortising machine with bits and cutters for joinery, wooden joinery, doors, furniture and various – CE Standard Technical data: Max mortise length 250 mm Head transverse stroke mm 100 Head rotation +/- 45° Vertical stroke of upright bracket 250 mm Vertical rotation of upright bracket +/- 45° Max window/door frame height 1000 mm Chain motor 3 Hp Vertical spindle motor 2 Hp Min/max horizontal spindle centre distance 50/130 mm Overall dimensions mm 850 x 900 x 1900 h Weight kg 390

Cutting capacity ISO M 2.5 - M16 Pipe and Fine Thread Max Diameter 16 mm Cutting head WAGNER ZR16/60 101 Built-in Strehler cutting jaws with 1 mm pitch Speed range 105/220/430 rpm Motor power 1.5 kW Machine dimensions 900/600 mm Weight 210 kg can be demonstrated under power.

Offer 26016 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Accessories - motorized bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg

Key data: 700 mm, 350 mm

A Blohm Simplex 7 surface grinder is being sold. Grinding length: 700 mm Grinding width: 350 mm Table clamping surface: 1,100 x 300 mm Self-dismantling and self-collection. Price is net plus VAT All information without guarantee

Key data: 5 mm, 40 mm

An edge banding machine is being sold. Machine works perfectly. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Banding thickness max 5 mm Plate thickness max 40 mm Thickness of roll material max 3 mm Workpiece length min 180 mm Workpiece width min. 60 mm Feed max. 8 m/min Glue system granules glue basin bottom Cross-cut saw unit 2 motors Weight approx. 660 kg The machine must be picked up with a tail lift or drop-down trailer, as there is only one pallet truck. Price is 3000 net plus VAT All information without guarantee Article location Nuremberg

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

Vertical Forming, Filling & Sealing Packing Machine SIEBLER Model STICK PACK Type 8000 for the production of sticks with powder. Bag width 30mm, two-lane, slider Volume dosing

horizontal cartoning machine CAM Type AV Format: A 20 - 115 x B 15 - 75 x C 50 - 195mm, Output 15 - 70 boxes/min, year 2026, unused, new Immediately available

Key data: 570 mm, 2000 mm, 2500 1/min

The WEILER E50HD x 2000 is a robust, cycle-controlled precision lathe for single part and small batch production. It offers a centre width of 2,000 mm, a rotation diameter over bed of 570 mm, a speed range of 1–2,500 rpm and a 20 kW main drive with high torque up to 1,300 Nm. The machine is designed for demanding turning operations and combines manual work with convenient WEILER cycle control and an easily accessible working area.

Inv. Num. : 9273 Type: APK 61 Producer: AKYAPAK Created: 2015 Parameters: Number of driven rollers: 3 pieces Shaft diameter: 61 mm Weight: 1080 kg

Automatic bending center designed for precise and maintenance-free bending of panels and sheet metal. Bending length: up to 1800 mm Material thickness: typically from 0.4 to 3.2 mm ABT system: The ABT (Auxiliary Bending Tool) option allows for up and down bending without the operator having to turn the sheet. SN: 2100889

General SKU207P139 MakePESTER VERPACKUNGSMACHINEN TypePEWO-PACK 450 SN No.4047 Year of construction1997 LocationBarneveld Main Features Width450 mm Specified Features - Transwrap machine Transwrap machinecheck Contact parts stainless steelcheck Suitable for film material:0,02 - 1,0 mm (PE) Sealing width30 - 300 mm Electric capacity16,0 kW With jacketcheck General With switchcheck Floorspace5.0 x 1.5 m Total height2.2 m Weight2320 kgTranswrap machinesPesterPackaging machines > Transwrap machinesBrand > Pester What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades., Accessories:, Motorized rake angle adjustment,, Coolant system,, Automatic central lubrication,, Machine light,, 2 grinding wheel holders,, 1 sawblade mounting bolt., sheet thickness: up to 8 mm, Tooth pitch: 6 to 120 mm, rake angle: - 15° to + 25°, Tangential free angle: 0° to 6°, Radial free angle: - 4° to +6°, Connection value: ca. 1,1 kW (400 V / 50 Hz), Weight: about 1150 kg, Grinding wheel diameter: Max. 125 mm, Bore diameter: 32 mm, Dimensions L x W x H: 1340 x 1400 x 2000 mm, colour: green, Circular saw outer diameter: 80 to 460 mm

Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011

Universal cylindrical grinding machine TACCHELLA 715 UA, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 150 mm, Distance between centres: 750 mm, Wheel dimension: 450x50x127 mm, Wheel speed: 1450 rpm - Variable and programmable, Spindle motor power: 7.5 Kw, Internal grinding spindle speed: 16.000 rpm, Weight: 3.600Kg

Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011

Suitable for regrinding and reworking of wood and metalworking tools of all kinds, Accessories:, Total enclosure, 6-axis robot Stäubli TX 60,, 6-slot wheel changer,, automatic fire extinguishing system,, automatic central lubrication, grinding wheel dressing unit,, 6 loader pallets, Inserts rotary station., X-axis grinding stroke: 400 mm, Y-axis grinding stroke: 310 mm, Z-axis grinding stroke: 305 mm, C-axis swivel range: 224°, A-axis speed: 850 U/min, Workpiece holder: ISO 50, Workpiece diameter: max. approx. 250 mm, workpiece length: max. about 900 mm, Workpiece length in face grinding: max. approx. 400 mm, Drive power of grinding spindle peak performance: 18 kW, Grinding spindle speed infinitely variable: from 300 – 8,000 U/min, Connected load approx.: 400 V / 50 Hz / 25 kVA, Dimensions W x D x H approx.: 3150 x 2200 x 2200 mm, Weight approx.: 4700 kg, colour: Gray / Metallic

Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories: Total enclosure, Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools, Program for erosion across the tool center at the cutting edge and for free erosion, Hardware and software for DNC service, Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F, Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system), Grinding mist extraction N 181, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Measuring probes, Machine lamp, Automatic central lubrication, Cutter outside diameter: Max. 250 mm, Cutting length: Max. 260 mm, Shank tool diameter: 10-250 mm, Tool weight: Max. 20 kg, traverse: X-axis 275 mm, Y- ...

: neu : 2026 : 090202 : prompt, Zwischenverkauf v : Türkei : 3600 € : 1 : 1.2 mm : 100 mm : 140 nm : 8 Stk. : 62 mm : 0.75 kW : 32 1/min : 900 mm : 450 mm : 1350 mm : 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.