129,119 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg
used spiral mixer Diosna SP 120 D, checked, 120 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, Masch.-Nr. 9714-6337
Bickel Slotting and Perforating Machine E. Bickel K.G. Heilbronn Type: H1/50 Machine No.: 21153 / Bauj. 1985 Tabletop device with 50 cm working width Groove comb with 2 groove thicknesses Perforating comb ( functional / difficult to use ) Cleaned and tested 950,00 € plus 19 % VAT Bickel grooving and perforating machine E. Bickel K.G. Heilbronn Type: H1/50 Serial: 21153 / YOM: 1985 Tabletop device with 50 cm working width Grooving comb with 2 groove thicknesses Perforating comb (functional / difficult to install) Cleaned and tested 950,00 € ( Tax free Intra-Community supply / VAT number needed )
Bickel Slotting and Perforating Machine E. Bickel K.G. Heilbronn Type: H1/50 Machine No.: 21153 / Bauj. 1985 Tabletop device with 50 cm working width Groove comb with 2 groove thicknesses Perforating comb ( functional / difficult to use ) Cleaned and tested 950,00 € plus 19 % VAT Bickel grooving and perforating machine E. Bickel K.G. Heilbronn Type: H1/50 Serial: 21153 / YOM: 1985 Tabletop device with 50 cm working width Grooving comb with 2 groove thicknesses Perforating comb (functional / difficult to install) Cleaned and tested 950,00 € ( Tax free Intra-Community supply / VAT number needed )
: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm thread dia.: M 24 mm spindle turning speed range: 100 - 1450 U/min feeds: 0,1 - 0,2 mm/U spindle taper: MT 4 table surface area: 560 x 385 mm Distance spindle/table max.: 780 mm distance spindle/base plate: 1320 mm voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 815 mm turning length: 3000 mm control: ECS 2402 swing over bed: 815 mm centre distance: 3000 mm swing diameter over slide rest: 485 mm spindle bore: 137 mm spindle turning speed range: 1200 U/min rapid traverse: 5 m/min spindle motor: 28 kW tailstock quill diameter: 115 mm tailstock quill stroke: 250 mm total power requirement: 30 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 5,87 x 2,10 x 2,10 m Equipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip Conveyor Without boring bar holder and boring bar. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mm y-travel: 350 mm z-travel: 400 mm milling-head swivable +/-: 90° spindle taper: SK40 spindle turning speed - stepless: 10-5000 U/min weight of the machine ca.: 2 t dimensions of the machine ca.: 2.5 x 2.1 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 140 mm table-size: 610 x 100 mm grinding length: 250 mm grinding head - revolution: 360 ° weight of the machine ca.: 0.47 t dimensions of the machine ca.: 0.9 x 0.95 x 1.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : DIN 69871 SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
internal grinding spindles: . centre height: 125 mm grinding length: 1000 mm grinding wheel diameter: 400 & 225 mm weight of the machine ca.: 3.1 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24093 Technical data: - Rivet shank diameter max. 6 mm - Feed force 1200 daN - Rivet time setting 0 - 10 sec - Projection 140 mm - Table size 250 x 175 mm - Installation height / table height adjustable - Stroke 40 mm - Operating pressure 5 bar - Pressure reducer - Drive 400 V / 0.6 / 0.75 kW - Space requirement approx. W 500 x H 1650 x D 650 mm - Weight approx. 480 kg
Vitap Sigma 2TAS Through Drill 4 vertical drilling units of two heads each 2 side spur spindles Spindle spacing 32mm Length of the processed material max 2500mm min 240mm Drilling depth up to 70mm Pneumatic Material Clamps Year of manufacture 2006 CE mark Machine Weight 1600kg Net price
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider
Stainless steel sink, Fabr. Franke
Key data: 500 mm, 400 mm, 400 mm
Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 310 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions
Spout-hand wash combination, stainless steel
Breadcrumb grater/mill, Fabr. Fomko, Grating Machine 500
Toast bread long-forming machine, Fabr. Benier, Type MI 600 with 4 four pieces of equipment,
Squirrel wrapping machine, Fabr. Universum, Type 30/3
Universal kneader, Fabr. W & P , Type UC 120 ACN
Wendelkneader, Fabr. Diosna, Type W 240 a, 2 Geschw.
Diosna kneading machine Spiral kneading station W 401 A with 4 stainless steel kneading trays
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Key data: 3500 mm
HÖFLER Porta 3500 CNC Gear Grinding Machine We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine, a large-capacity later-generation traveling gantry system with very low operating hours. Machine Overview Make/Model: HÖFLER Porta 3500 CNC Year of Manufacture: 2007 Installation Year: 2010 Total Operating Hours: approx. 6,800 hours Design: Later-generation traveling gantry system Condition: The machine is currently in still under power and requires reinstallation of a refurbished hydraulic drive motor (included) prior to recommissioning. Key Specifications (Maximum capacities as per OEM data) External Grinding Diameter: 3500 mm (137.8”) Internal Grinding Diameter: 800 mm (31.5”) Tooth Profile Height: 80 mm (3.15”) Helix Angle: ±45° Max Module: 20 (1.34 DP) Grindi ...
Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy), Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterru ...
Various flat knitting machines with different gauges and Groz-Beckert needle sets are available. 1) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 2) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 3) Stoll CMS 303 TC, gauge: E12, nominal width: 1270mm, needle set: 12. 4) Stoll CMS 303 TC, gauge: E10, nominal width: 1270mm, needle set: 10. 5) Stoll CMS 340 TC, gauge: E12, needle set: 12. 6) Stoll CMS 411, gauge: E10, needle set: 10. 7) Stoll CMS 422 TC, gauge: E12, needle set: 12. 8) Stoll CMS 422 TC, gauge: E12, needle set: 12. 9) Stoll CMS 422.6, gauge: E12, needle set: 10. 10) Stoll CMS 422.6, gauge: E12, needle set: 10. 11) Stoll CMS 422.6, gauge: E14. 12) Stoll CMS 422.6, gauge: E14. 13) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 12. 14) Stoll CMS 430.6, gauge: E12, nominal width: 2440mm, needle set: 10. 15) Stoll CMS 4 ...
plate thickness: 3 mm angle adjustable from - to: 30 - 120 Grad table height: 900 mm weight: ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel, cutting angle continuously adjustable from 30° to 120°, pneumatic clamping for angle adjustment (Boschert system), machine is in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kW Overall size: ca. 400 x 1100 x 1250 mm deburring machine / free belt frinding machine abrasive belt with widt from 12-50 mm with vertical working position head inclination up to 45° both ways easy bending of the belt allows to follow the shape cutting speed 24m / sec big tabel surface with ball rolling with self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/h comes with a huge bunch of belts! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: max. 3 mm distance betw. rolls: 125 mm throat: max. 500 mm weight: ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt 1 set of rollers Forward/reverse operation via foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Croissant wrapping machine Seewer Rondo SCR40. A0 - Croissat wrapping machine mobile - Manufacturer: Seewer Rondo - Model: SCR40, A0 - 400 volts
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...
A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.
Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new
maximum number of results exceeded
please refine your search
