roll forming machines used for sale

MAX DIAM 200

Binding machine BindMaster - year 2014 - automatic cover feeding and creasing - programs - spine and side gluing - max. book size 360 x 380 mm - max. cover size 360 x 700 mm - book thickness up to 55 mm

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

x-travel: 390/410 mm y-travel: 290/310 mm z-travel: 380/400 mm total power requirement: 4 kW weight of the machine ca.: 1,25 t dimensions of the machine ca.: 2100x2100x1700 m technical data please see attachment! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height 115 mm Tip distance 500 mm Clamping diameter 250 mm Largest / smallest distance clamping table surface to spindle center 370/70 mm Largest vertical distance between the centre of the grain and the centre of the spindle 255/45 mm Largest horizontal distance from the centre of the spindle to the centre of the grain / the edge of the clamping table 340/385 mm Longitudinal slide path / cross slide path 500/270 mm Perpendicular travel of the carriage beam 300 mm Swivel of the clamping table 90° Swivelling of the grinding head around the vertical axis 360° Tiltability of the grinding head to free angle below and above the center 15..0..15° Adjustability of the grinding head to twist angle right and left direction 60..0..60° Grinding spindle speeds 1100/2200 1/min Power of the drive motor / hydraulic motor 0.9 kW Net weight of the machine 780 kg

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

MM 3694 ZTM 3 gatherer – 12 stations – hand feed station MM 3030-19 Klebebinder MM 3632 stapler (year 2013) MM 3673 trimmer SCS Automaberg Easy Fly (year 2008)

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

grinding diameter: 355 mm grinding length: 600 mm weight of the machine ca.: 7,5 t centre height: mm total power requirement: kW dimensions of the machine ca.: m Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: schleifbarer Durchmesser / grinding diameter 355 mm Schleiflänge / grinding lenght 600 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 9 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

Vollenda bucket filling system for 2 and 5 kg containers with Motoman (Ehcolo)-EPL160/300 palletizing robot and Robopac pallet wrapper. Auto. Pallet pick-up. Complete system including roller conveyors, dedusting systems, silos with conveyor systems. Facility in very good condition. Original price € 2 million

accumulator pressure: 780 bar 0: 38 ml Capacity: 55 kW control: Siemens KP400 weight: 3.300 kg Power connection: 80 kVA voltage: Hz 50 / 3 x 400 V range L-W-H: 3.240x1.200x2.800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Max. flow rate: 38 l/min -Power HP pump: 55kW -Max. water temperature: 40 degrees -Operating voltage: 3x400V/50Hz -Connected load: 80kVA -Total current consumption: 115A -Curb weight: 2300kg -Control: Siemens Comfort Panel KP400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bausch and Ströbel Fully automatic pressure-sensitive labeling machine type ESF 1015 for self-adhesive labels (adhesive labels) The processing range is 16 -70 mm for the object diameter and 35 -320 mm for the object height

Key data: 420 mm, 1500 mm, 3000 1/min

Stock number: 3979 CNC LATHE Manufacturer: MAZAK, Type: QTN 350 M Year of Make: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About bed 700 mm DIA. Turning length 1500 mm Main motor power 30 kw Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Tool turret with 12 stations Motor Power Driven Tools 7.5 Kw Powered tools. 25-4500 rpm Control Mazatrol 640T NEXUS Fabr. Controlled in 3 Axes Accessories: Various tool holders. Tool setter Chip conveyance. Cooling water system. Length: 4300mm, Height: 2400mm, Width: 2600mm, Weight: 7900 kg

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute Two similar machines available at the same place !

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

x-travel: 350 mm y-travel: 200 mm z-travel: 350 mm table surface area: 700 x 280 mm spindle taper: SK 40 : 150 - 1660 U/min feeds: 25 - 285 mm/min rapid traverse: 1 m/min quill stroke: 80 mm milling-head swivable +/-: 45 ° total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 480 mm turning length: max. 2.000 mm control: Sinumerik 840 D Siemens swing diameter max. over bed cover: 520 mm Main spindle:: turning speed range - main spindle: 7 - 2.800 min/-1 transmission ratio: 2 power capacity - main spindel: 53 kW max. Torque: 3.456 Nm spindle nose: 11 DIN 55026 chuck diameter: 315 mm spindle bore: 103 mm usable bar diameter: 82 mm axis stroke:: x-travel: 405 mm z-travel: 2.049 mm Tailstock:: diameter of quill: 100 mm quill stroke: 100 mm tension force: 14 kN capture: 30 DIN 2079 feeds:: rapid traverse: 10 m/min Working speed: 0,1 - 10.000 mm/min feed power: 15 kN Tool Mount:: number of toolpositions: 12 pos. driven statition: 6 pos. Shank diameter: 50 mm power capacity: 5,4 kW Max. Speed: 2.500 / 625 min/-1 max. Torque: 25 / 100 Nm total power requirement: ca. 50 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 6,4 x ...

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 10.100 (2x 5.000) mm y-axis: 3.000 mm z-axis: 1.500 mm Control: Sinumerik 840 D Siemens distance between columns: max. 3.000 mm passage: max. 1.950 mm distance spindle center to table: max. 1.800 mm distance spindle nose and table: 1.350 / 1.500 mm Main spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 20 kW max. Torque: 48 Nm tool taper: HSK-A63 DIN 69063 Spindle Extension: 450 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 1.100 Nm tool taper: HSK-A100 DIN 69063 Spindle Extension: 300 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° work table:: table surface area: 4.000 x 2.200 (2x) mm max. table load: 12 / 20 t height over floor: 700 mm number of ...

Wrapper

Labeling Machine Make: Gernep Type: SK 5000 Capacity: 5000 bph

KVM 105x125 Block/Paving stone plant complete 2005. KVM computer control, palletizer system, 2 elevators 18 levels, curing rack system 18 levels, Finger car for wet and dry side, 2300 boards, board turner/stacker, plastic wrapper unit, Haarup 2500 batching plant, Face mix, colour system, 3 Cement silos, Euro pallet dispenser.. The plant is in very good condition and can be seen after appointment. (Video is available) SUPER PRICE! Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Phone: +45 29251017.

Sheet format: max. 760 x 1060 mm, min. 300 x 350 mm Equipment: Stripping station, centerline, non-stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feed belts, drawing mark left, slide mark right, machine hours approx. 8 million punches, 1 die-cutting frame Quick-release frame at the top/bottom of the stripping station, raised position, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, materials that can be processed: paper min. 90g/m², cardboard / solid board max. 2,000 g/m², corrugated board up to 4 mm.

swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mm max. turning diameter: 260 mm Max. Turning length: 540 mm travel -x axis: 240 mm center height over bed: 260 mm control: FANUC 21i-TB spindle bore: 77,5 mm no. of tools in turret: 12 x tool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used high performance mesh welding line for standard mesh This lines is feeding cross and line wire off spools directly Max working speed are 180 cross wire/min Complete line from line wire pay offs up to turning ans stacking unit. Further equipment ( spools, butt welder , main transformer etc.. and cold rolling lines ) can be offered as well

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 21.425 year: 2011

One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line

One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 20.567 year: 2011

For sale: Tetra Pak Cardboard Packer 32 Z-form WA SIDE FLAP working hours 14.326 year: 2009

For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014

control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

Satin sander COSTA LEVIGATRICI model S A2 TS 1350 : – with electronic PCM control and touch-screen video – useful working width 1350mm – useful working thickness from 3 to 160mm – variable feed speed from 5 to 25 m/min – with perforated belt and depressor – n° 1 belt unit with pad, 2620mm belt development, with air blowers belt cleaning – n° 1 scotch-brite group (inside the machine) Year 2000, CE regulations

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

A used Kemper ST125A spiral mixer extendable with 2 stainless steel boilers and 2 new timers from Schleicher is immediately available in our warehouse. - Type: ST125A - with 2 boilers - for max. 125 kg flour or for max. 200 kg dough - With 2 automatic timers (new) - Kettle diameter 90 cm - Boiler capacity: 300 litres - Boiler drive via friction wheel - Boiler can be manually locked -extendable - With 2 new timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted Trade-in and shipping costs on request. We are constantly looking for and buying bakery machines of a ...

PART NUMBER: 7458 SPECIFICATIONS - max diameter of the machined pins 120mm - 60mm sleeve installed - 5 additional bushings 40, 70, 80, 90, 100mm - max input material diameter 150mm - min input material length 800mm - max machining allowance per side 15mm - knife head drive motor 18.5kW - 4 types of speed feed + forward/reverse - feed motor about 1.1kW Successively: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling outhands - dimensions length/width/height 3060x1240x1400mm - weight about 1800kg ADVANTAGES – Polish production – 3-knife head – additional bushings included – used turning machine, very good condition Net price: 36900 PLN Net price: 8581 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

Dough dividing and rounding machine Fortuna Primus Pro head machine - Dough dividing and casting machine - Fortuna Primus Pro - 4 rows -Stainless steel - Voltage: 3x400+N Volt - Power: 1.9 kW - Frequency: 50Hz - Required fuse: 25 A - Year of construction 2013

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Key data: 50 , 1 , 14

Manufacturer: Battenfeld Type: Microsystem 50 Year of production: 2000 Control: Unilog B4 Closure Type: Knee Closing force: 50 kN Maximum mold dimensions: 196 mm x 156 mm Plate Size: 196mm x 364mm Tool height: min 100 Opening Distance: 200mm Maximum distance between plates: 300 mm Screw: 14mm Stroke Volume: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar General Total power: 2 kW Dimensions: 1.9 m x 0.8 m x 2.4 m weight: 1100 kg On-screen text: German Accessories: • Rotary table, • Robot integrated with the machine, • Fully electric injection molding machine, • Quality monitoring module, • Cleanroom module, • In-mold pressure control • Quiet operation of the machine • Additional 14 mm auger

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm Control: SIEMENS SINUMERIC 840D table-size: 2.900x700 mm table weight: 2.150 Kg tool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mm workpiece weight: 6 kg workpiece dia.: 80/130 mm : 30 fach main drive: 18,4/14 kW speed: 14.000 mm/min rapid traverse: 40 m/min feed: 40 m/min Machine on: 18.859 h Spindle hours: 5.666 h internal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kW weight of the machine ca.: 14.520 kg dimensions of the machine ca.: 10.280 x 7.230 x 3.042 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand manufacturer: SIDEL Type : SBO 6/10 Serie 1 Machine currently in overhauling process Capacity: 7.200 BPH Number of moulds: 6 Equipped : quick change for shell moulds Oven type : linear with 10 heating modules Neck personalization: PCO 28 in 1810 can be modified to yours Machine equipped with: - Sidel preforms hopper & feeder - Sidel electrical cabinet - optionally we can supply new molds as per your drawing The machine will be supplied after overhauling with guarantee.

Key data: 1300 mm, 117 , 35

Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy

Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap

For sale is a used Schäfer & Flottmann tray erector with lateral insertion function for package inserts, package products such as e.g. Flower seed bags, etc., which are placed at the bottom of the tray. The tray is previously covered with an adhesive and can thus be fixed to the bottom of the tray. A vision system from Keyence uses the camera to check whether the products used have been positioned correctly. If not, the tray is ejected. In one of the following stations, products can either be inserted laterally or the tray is formed into an open tray. The Schäfer & Flottmann has run little and is in very good condition. There were 2 systems in stock and one of them has already been sold. There is a very extensive spare parts package worth about 150,000 € for the system