roll forming machine used for sale

ILLIG UA 200 G thermoforming machine was built in 1990 in Germany. This highly efficient machine is used in the production of high-quality plastic parts, such as tubs, containers and car parts. As the ILLIG thermoforming line is equipped with two material feeders, the thermoforming process is fully automatic and also allows machining in sheets or from a roll. Technical data of the ILLIG UA 200 G thermoforming machine - maximum mould dimensions (L x W): 1960 x 980 mm - minimum mould dimensions (L x W): 860 x 720 mm - total heating capacity: 87.2 kW - maximum operating pressure: 10 bar - material feeder (2 pcs.) - power supply: 3x 380 V; 50 Hz

Koppens mobile forming machine, type: VM 600, machine number: VM 600-90, 380 V, 3 Ph, 50 Hz, 23 A, 11.31 kW, 850 kg, 3 heads, dimensions: 1730 mm x 830 mm x 2150 mm. Including s/s trolley with forming plates, dimensions: (5x) ø 75 mm, (20x) ø 30 mm, (42x) ø 27 mm, (20x) ø 55 mm, dimensions trolley: 1550 mm x 600 mm x 1700 mm. Missing outfeed belt. Lot located on Urk, the Netherlands. Viewing and pick-up in consultation with Industrial Auctions BV.

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

workpiece diameter:360 mm centre distance:600 mm turning speed range - stepless:2 - 1.550 U/min transmission ratio:2 tailstock travel:800 mm power maindrive:33 kW :160 kVA weight of the machine ca.:17 t precision flow-forming machine with 2 rolls, slides with 2 roller under 90°, central lubrication, max. round blank dia. 380mm, bed length 3.670mmm, mainspindle speeds infinitely variable, hydr. roller drive, swivellable roller bearings, coolant device 800 l, only approx. 4.300 working hours

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 40 mm   external diameter max.: 150 mm   length min.: 260 mm   lenght max.: 1500 mm ELECTRICAL SPECIFICATIONS   total power consumption: 155 kW   mains power supply: 280 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007 Exclusions from supply (even if visible on photos)- without chip breaker - without laser marking system

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 80 mm   wall thickness max.: 25 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW   mains power supply: 200 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 59 mm   external diameter max.: 100 mm   wall thickness min.: 1.5 mm   wall thickness max.: 3 mm   length min.: 3000 mm   lenght max.: 12000 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1500 mm System consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm

Seven tubular bag machines from Affeldt are available: Two E350 DV models (built in 1999 and 2004 with around 3 million packs and 192,460 operating hours), three AVN E350 D models (built in 1999, 2014 and 2014 with 3.7 million packs and operating hours of 14,405 and 16,305 respectively) and two AVN E350 DN models (built in 2001 and 2002 with around 5.2 million packs). The machines produce approx. 22 packs of 2.5 kg per minute. They are offered without printers and labelers. Individual sale of the machines is possible.

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2 with fine adjustment; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 1500kg;

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

Working width: 380 mm; Working height: 200 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 220mm, vario-drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

The line avaible to sell is used but in very good conditions. It is equipped with: n.1 Decoiler 1250mm x5 ton n.1 Roll-forming machine with n. 12 passes- useful width 1000 mm n.1 Set of Forming rolls assembled to produce corrugated profile 75x18 mm n.1 Flying shear with guillottine blades (pneumatically operated) n.1 Electrical system with programmable device n.1 Tank for compressed air (without compressor)

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer

Sheathing line Roll forming line for laminate Stacking of the panels Sawing the panels Milling the panels Transport Gluing of the decorative foil Transport More items new and used - you can find them in our shop! International shipping costs on request!

Inv. Num. : 4010 Type: RM1 Producer: P/A INDUSTRIES GmbH Created: 2014 Parameters: Maximum sheet plate width: 675 mm Maximum sheet thickness: 1 mm Maximum product length: 10 m Line speed: 50 m/s Al Strip of Thickness: 0 25-0 4 mm

Two (2) aluminium roll forming production lines for the production of spacer bars for double glazing. - Dimension of machines: 18-20m length and 4m width - Dimension of welding unit and cooler: 4m length and 2m width - Min. and max. speed: from 90m/min up to 170m/min - Energy power from 76kwatt up to 120kwatt Each line consists of the following parts: 1) Decoiler 2) Base machine 3) Welding unit EMMEDI 4) Cooling unit 5) Degreasing unit 6) Electronic flying shear 7) Exit Bench The groups of rollers available per type of product are as follows: For the production of bendable spacers with height 6,5mm: 5,5 8,5 9,5 11,5 14,5 15,5 19,5 Number of groups: 7 Number of auxiliary groups 7 For the production of normal (not bendable) spacers with height 6.5mm: 5,5 6,5 7,5 8,5 9,5 11,5 13,5 14,5 15,5 17,5 19,5 Number of groups: 6 Number of auxiliary groups 3 The alumi ...

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW MANUFACTURER: KalmeijerType : KGM 250NEWConing number : 1263.920 Ref : 1600.905 Ref : 1600.900 Ref : 1120.920 Ref : 1120.919 Ref : 1100.935 Ref : 1100.940 Ref : 1383.919 Ref : 1270.900 Ref : Special rollers See picture for details

sheet width:approx. 300 mm plate thickness:approx 1,5 - 2,0 mm stations:8 column movement:80 mm Shaft adjustment - vertical -:170 The center height of lower roll is 234mm The longitudinal distance betwin roll centers is 600mm Available: only hardware from Gasparini + a hydraulic device and a small control cabinet for the cutting unit. There is no control cabinet or control included. No manufacturer number.

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

LIQUIDATION of complete line of chapata forming with the option of 2 sizes. Our "Multipurpose Line" allows us to continuously and automatically produce a wide range of products such as chapata. Manufacturer: CANOL. The line includes the following models of CANOL machines: MCI 690, PRE 700 C/O, MUL 700, TR/D, GH/MR/65. Thanks to the 'Zero Stress' technology applied to our pasta extruder, it is possible to treat all types of sourdoughs with a high moisture content gently and without stress, safeguarding the gluten structure, keeping the structure of the dough stable and avoiding the loss of yeast gas from it. Thanks to the use of this methodology, the final quality of the products obtained, both frozen and cooked, is considerably superior to traditional systems and lines. Our line "Multipurpose Line" is characterized by the ease and speed in the passage of production from one product to ...

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock

Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Capacity: 100 t Stroke of each cylinder: 200 mm Width material maximum: 10 mm Distance grippers maximum: 710 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:710mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:         ...

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Max. hydraulic pressure: 400bar.

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Capacity: 100 t Stroke: 355 mm Die length: 585 mm Die width: 620 mm Hydraulic pressSack Kiesselbach - HSVP 1000  Hydraulic cold hobbing press Swaging (wire rope clamps) Cold flow pressing (non ferrous material) Medal coining Bottom ejector Capacity Kg:           100000 Distance between column:585mm Table Length:          585mm Table Width:           620mm Table Height:          1000mm Ram stroke:            355mm Approche speed:        200mm/min. Working speed:         8.5mm/min. Return speed:          200mm/min. Power:                 37kW Length:                3700mm W ...

Swivel bending machine, cant bench, gutters, roof gutters, beading machine, beading machine, three-roller round, three-roller sheet metal bending machine, bending machine, sheet metal round bending machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine -Swivel bending machine: with 3-roller bending machine on a solid base -Max. Working width: 1020 mm -Max. Sheet thickness: 1.5 mm -Roller diameter: 2x 50 mm / 1x 53 mm -Dimensions: 1450/800/H1155 mm -Weight: 346 kg

Sheet thickness: up to 4.5 mm, Roller diameter: 120 mm, Foot pedal for Vor. and return, CE mark, Operating instructions Special equipment: Hardened and ground rollers, Base frame with machine feet

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...