roll forming line used for sale

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval ThinkTop V70 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V70 series is the more flexible option compare to the V50, that can be configured to meet the needs of the most demanding valve applications such as Mixproof valves. Solenoid valves 3 x 3/2. Digital 24 VDC. Article number: 9615400012., Type of Machine: Valve-top control unit, Art. no.: 9615400012

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs, motor 7,5 kW - 1.450 rpm - 380 V - 50 Hz., - Circulation pump stage 1 ...

Unused renovation kit for an Alfa Laval CPM Constant-Pressure Modulating Valve (CPMI-2) pneumatic regulating valve. Genuine Parts Service Kit CPMI - 2/XPMO - 2 Upper NBR, Lower EPDM/PTFE, part no. 9611920218., Type of Machine: Constant-Pressure Modulating Valve, Art. no.: 9611920218

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Croissant roll pastry line Fritsch For Fritsch plant Croissant cutter Dimensions approx. 75x23cm Height 27 cm Baker condition Details see picture

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line filled 1,5 liter bottles. The capacity is 13500 bottles / h. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Manufacturer: Hoerbiger ORIGA, rodless pneumatic cylinder -Type: EU/4200-040-01000- -Stroke: 1000 mm -Drive: pneumatic -Price: per piece -Number: 2 piece -Dimensions: 1300/70/H100 mm -Weight. 7.7 kg/piece

2019 GAI 1730S-HV-4292 TOP — Fully Automatic Filling, Capping & Labelling Line Complete, fully automatic bottle filling and labelling line by GAI (Italy), year of manufacture 2019. Designed for viscous liquids such as oils, syrups, sauces, and similar products. Stainless steel construction throughout. CE-certified with full safety guarding. The line consists of two main units: 1. Filling & Capping Monoblock — GAI 1730S-HV-4292 TOP 10-station high-performance vacuum filler specifically engineered for viscous fluids. Patented fill valve design seals both the product tube and gas tube during filling, preventing any air contact with the tank contents. Fill level is centrally regulated and manually adjustable from 30 to 90 mm below the bottle neck. Centering cones on each fill valve ensure precise bottle alignment. Central bottom-feed product supply allows complete and natural tank dr ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A, Estimated capacity: ± 30 m3/h

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle, linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Travel: 2430 mm -Servo motor: manufacturer Beckhof type AM3074-0Q40-0000 -Max. Speed: 2500 rpm -Power: 7.35 kW -Torque motor: 48.8 Nm -Number: 2x rails available -Price: complete -Dimensions piece: 3740/200/H405 mm -Transport dimensions: 3740/400/H405 mm -Weight complete: 444 kg

Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Siemens Sinamics Active Line Module 6SL3130-7TE21-6AA3 -Max. power: 16 kW -Input: 3 AC3 80-480 V 50/60 Hz -Output: DC 600 V 27 A 16 kW -2x converters available Price: per piece -Dimensions: 500/100/H270 mm -Weight: 7 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Siemens Sinamics Active Line Module 6SL3130-7TE23-6AA3 -max: Power: 36 kW -Input: 3AC380-480V 50/60Hz -Output: DC 600V 60A 36KW -Quantity: 6 pieces available -Price: per piece -Dimensions: 500/150/270 mm -Weight: 10.7 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Power cable, solar cable, fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, data line, video cable -Manufacturer: Lapp Kabel, data line on cable drum -Type: UNITRONIC Li2YCY PiMF 5x2x0.5 ROHS -Cable drum: schill IT 380.RM -Cable length: 97 m -Number: 7x cable drums available -Price per piece -Dimension: 410/260/H450 mm -Weight: 21 kg/pc.

Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, linear guide rail -Guide rail: Linear guide rail, 2 pieces -Rail length: 1450 mm -Rail width: 20 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 1450/40/H18 mm -Weight: 7.3 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module -Manufacturer: Siemens, Sinamics Active Line Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3130-7TE23-6AA1 -Input: 3AC 380-480V - 50/60Hz -Output: DC 600V 60A 36kW -Dimensions: 500/150/H270 mm -Weight: 10.6 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

Line chokes, line filters, frequency converters, drive inverters, line filters, Smart Line Modules, Basic Line Filters -Manufacturer: Siemens, Line choke Line Filter Sinamics for 36kW -Type: 36KW SLM/ALM / 40 KW BLM -Voltage: 3AC 380-480V, 50-60Hz, 74A -Number: 4x Line Filter available -Price: per piece -Dimensions: 415/75/H225 mm -Weight: 7 kg/piece

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc.

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Manufacturer: Schäfer Folienkaschiermaschiermaschine, Type: SIK 1250/R,, Year: 1999, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: endlos, Min.-max. workpiece height in mm: 3-40, Working widht max mm: 1300, Working width min min mm: 100, Working widht mm: 1300, Working hight mm: 880, Feeding speed min-max m/min: 3-20, Roller diameter mm: 120, Lamination calender: yes, Diameter of lamination calender in mm: 120, Roller diameter mm: 120, at top and bottom: gummiert, pre-coated foil: yes, Main engine kW: 0,37 , FREE TEXT: inkl. Einlaurollgang und Auslaufrollgang 2 mal 3000 mm, Year :1999

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer milling: yes 2  ...

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben 1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rol ...

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

B+S/Dividella/Mettler-Toledo Garvens/Pester labelling & packing line for ampoules and vials comprising Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1140 kg, Dividella NeoTop 904 topload cartoner with partition for ampoules and vials, format range min. 60 x 45 x 17 mm (LxWxH), max. 150 x 150 x 32 mm (LxWxH), capacity up to 900 objects/min. and 90 packs/min., Robatech hot glue unit, RonTech booklet-feeder, GUK leaflet folder from stack, Mettler-Toledo Garvens XS 2 MV checkweigher, max. 600 g, d = 0,1 g, T = -540 g, Pester PEWO-pack 250 compact stretchwrapper for folding cartons, etc maximum film width 250 mm, maximum format range 180 x 400 x 200 mm, capacity up to 60 bundles per minu ...

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...

A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Number of systems available: 2 Year of Construction: 2010 In operation until: January 2014 System Components and Manufacturers - Transport system: Güdel Company - Finish station: Technofinish / Emtec - Car wash / spray cleaning unit: MTM - Measuring station: Komeg (post-process measurement) - Automation and control: Roth GmbH Equipment Included - 2 complete finish systems (Finishanlage komplett) - 2 spray cleaning chambers SKR 12 (Spritzkammer Reinigungsanlage) - 2 post-process measuring stations for shaft components - 2 automation control cabinets - 2 palletising units EuroPal P64 - 2 portal handling systems ZP-2 with 6 carriages each - 2 camera inspection systems InSight 5100 - 2 BOGE compressed air centres CLDF 9-270 - 6 transport trolleys - 140 workpiece trays 400 x 600 x 35 mm - 2 KLT transport systems (left and right) - 26 servo motors Siemens 1FK7042 - Suction grippers, sin ...

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.