roll forming line used for sale

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Rated load capacity: 5t, clamp pressure/working pressure: 18/16MPa, front overhang: 575mm, center of gravity Px/Py: 480/810mm, weight: 2.1t. An inspection on site is possible.

Curves roller conveyor; Height approx. 800mm; Depth approx. 1600mm; Width approx. 3200mm; Condition as is.

control: Fanuc Series 31i - B workpiece length - max.: 300 mm grinding wheel diameter: 356 mm grinding wheel width: 75 mm quill stroke: 45 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with pull-off conveyor, telescopic conveyor belt, conveyor belt, telescopic conveyor, unloading telescope, loading telescope, roller conveyor telescopic conveyor -Roller conveyor: completely electrically movable -Telescope: extendable to 10,620 mm -Roll width: 800 mm -Length: 5230-10,620mm -Load capacity: up to 50 kg/m -Working height: 1615 mm -Transport dimension: 5230/1320/H2170 mm -Weight: about 2000 kg

Er worden 3 rollen aangedreven - directe transmissie geharde rollen digitale uitlezing conische buiging permanente smering Planetaire beweging: minimaliseert contact en wrijving tussen de onderdelen, waardoor de buigprestaties verbeteren. gt; Directe overbrenging: versnellingsbakken gekoppeld aan de rollen, lagers en Hydraulische motoren om het energieverbruik te verminderen en de sleepkracht te verbeteren. gt; Permanente smering: alle onderdelen zijn voorgesmeerd en levenslang afgedicht. gt; Rolbuiging: bi-conische vormgeving om ton- of spoeleffect te voorkomen gt; Bewegingscontrole en rolparallellisme gt; Conisch buigsysteem Number of rolls: 3 rolls Roll capacity cold: 3100 x 20 mm Roll dia upside: 340 mm Dia under roll - side rolls: 320 mm Power needed: 11 kW Weight: 9 ton

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line König Classic Rex Combiline 800 This system is currently still being repaired (pictures are from the bakery) Suitable for the production of round, oval and die-cut rolls as well as other stamped rolls Year of Make: 2008 Dough divider and rounder, type: Classic Rex T6 Proofer, Type: Combiline 800 Weight range: 45-100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proofer Proofer with air conditioning (temperature, humidity) side discharge belt for further production (e.g.: downstream

Bread Roll Line Combi WP Multimatic MUS Selecta Modular V60 Combi Year of Make: 2016 Condition: repaired, ready for immediate use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS 5-row 3/4/5-row, combined roll line for the production of shaped rolls and long rolls, sliced and uncut Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6000 pieces Fermentation time: 12 min Stamp unit for emperors, braids, pressed rolls, etc. Green operation without proofer with direct deduction possible (e.g. for Berliners) Performance

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2003 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement.

Bread roll line König Mini Rex G2000 Year of Make: 2004 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

WP Kemper Softstar Evolution Compact Bread Roll Maker Year of Make: 2013 Suitable for the production of round, elongated, cut or punched dough pieces (e.g. Berliners, cut rolls, after-work rolls, etc.) Max. hourly output (6 rows): approx. 12,000 pieces Weight range approx. 45-95g 6-row head machine with pre-portioner Blockable rows for e.g. 4-row production (sliced rolls) Touch control with program memory Incl. chamber drum for various weight ranges Proofer with air conditioning Long rolling unit with motorized upper belt  Punching unit incl.

Bread roll line WP Multimatic MUSG-4 Dough dividing and casting machine, for the production of round dough pieces 4-row head machine Manufacturer: Werner & Pfleiderer Type: Multimatic MUS-G Year of Make: 2010 Condition: used, repaired Weight range: 50-150g Hourly output: 2600 to 8000 pieces Digital control, with adjustable hourly output, operating speed, weight adjustment (motorized) Depositing device, for automatic filling of the dough pieces on baking trays Manufacturer: WP Kemper Type: AB Condition: used, repaired Working width: approx. 60

Fortuna Magnus S6 Profiline K bread roll line  Fortuna Magnus S6 dough divider and rounder, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofer with heater and humidifier, year of construction: 2012 Green operation possible without proofer Long rolling station Cutting unit Punch unit Seed station with humidification for one-sided seeding Setting machine for baking trays or placing on conveyor belt for further processing possible More information, pictures and videos will follow...

Bread roll line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex Futura, swing-out, up to max. 4,000 pieces/h Stamps for round and square rolls Stamp size: SKG63 and RK64 Weight range: 40-105 g Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread Roll Cutter Lochbihler Leo TG Year of Make: 2016 Condition: cleaned and serviced Passage width: up to max. 160 mm Passage height: up to max. 80 mm Speed: infinitely variable Hourly output: up to approx. 2000 rolls Flow Height: Adjustable Cutting height: adjustable Height scale: for knife and upper belt Electrics: separately constructed control box Clear cover on the front Breadcrumb drawer completely removable Inlet extension: height-adjustable Inlet extension: foldable Outlet plate: Tilt angle adjustable Outlet plate: foldable 230 Volt ready to plug in

Trima K2 bread roll line with compact proofer G2-3 Suitable for round, long-rolled, folded and flattened products, e.g.: hamburger, hot dog, mini baguette Dough divider and rounder K2 (YOC 2014) Digital adjustment of weight adjustment, effective room height adjustment, effective speed and effective time Dough hopper capacity 25 kg with feed belts Flour for dough hoppers, moulding chambers and spreader belts Manual pressing pressure adjustment for different types of dough Weight range: 25-95g / 50-150g With footswitch Touchscreen control with recipe memory Power: max. 3,200

Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate

Lippert roller conveyor 1620-570-500 RA2511 Make: Lippert Roller width (RB): 500 mm Nominal width/outer width (NB): 570 mm Length: 1420, 1620, 2100 or 2700 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: Interroll Drummotor Electrical data: 24 V Frame height: 105 mm Conveyor speed: Speed controll with Interroll Motorcontroller Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) nominal voltage: 24V Conveying length in mm: 1420, 1620, 2100, 2700 Nominal / outside width in mm: 570 Roll width in mm: 500 Roll division in mm: 76 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone o ...

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2009 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Seeder station, type: Rumo 6 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

König Artisan SFC bread roll line Year of manufacture: 2018 Condition: cleaned & tested Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Mini Rex G2000 Year of Make: 2005 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

König Artisan SFC bread roll line Year of Make: 2013 Condition: functional, bakery condition Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Eco Twin 800 Year of Make: 2008 Head Machine, Type: Classic Rex T6S Stamp size SK58: 30 to 80 g 800 mm version: 6-/5-row working method Max. hourly output (proofer): 5040 pieces Max. hourly output (head machine): 9000 pieces With direct deduction for production without proofer operation High product variety thanks to interchangeable plunging tools and cutting station Long-knit station For the production of the following products: round, round-stamped or long-rolled, long-rolled-cut or long-rolled-pressed Incl. 1x cutting station, 1x plunger tool of your choice, according to

Long rolling station Lippelt 800 Year of manufacture: 2018 Working width: 800 mm Pressure roller in the inlet adjustable in height and side Knitted board, adjustable With indexing roller on transfer belt (pneumatic) Flour shaker with electrically adjustable flour quantity incl. 2 containers Pressure roller on the spout, height and side adjustable Belt speed adjustable Machine can work in stand-alone operation

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : RT 70 RCA Year of manufacture : 2004 Bosch Control unit Machine has arrived. The machine brings an electronic error. Therefore, the machine is offered in need of repair. The machine comes from the first owner, from a German company. Accessories: according to photos Machine weight approx. [weight]: 1 t Dimensions approx. [size machine]: 140x140x230cm Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We are looking for ...

Baguette long roller Artofex AFH Year of Make: 2022 Condition: cleaned & tested, new underbelt Dough input manually Dough sheeter at the infeed, adjustable 1. Forming board, height adjustable, dough shape pointed or straight, with flour shaker 2. Mold board, flat Working width: 600 mm Adjustable working speed

Bread roll line WP Kemper Quadro Filius Year of Make: 2012 Weight range: approx. 25 to 360 g 1 to 6 rows of operation (depending on the cutting rollers) TA up to 180 Output approx. 1,400 to 4,000 pcs/h Max. 320 kg dough/h Dimensions LxWxH: 271 x 75 x 180 cm Power requirement: 230 V Compressed air 6-8 bar Incl. 1x cutting roller (3-row), 1x punch

Bread roll line König Basic Rex II Combiline 600 Year of Make: 2008 Condition: Currently under maintenance, pictures before maintenance For the production of round, oval, punched, elongated and flat products from wheat dough, mixed Swiss dough, cereal or fine yeast dough Suitable for shaped buns, elongated buns, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for elongated pasta) Weight range: 35-85 g Dough divider and rounder, type Basic Rex II, 5 rows Long knitting board in front of proofer Proofer with

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2022 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Bread roll line König Mini Rex G2000 Year of Make: 2008 Compact system G2000 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Key data: 1 t

Type : Thread rolling machine Manufacturer : Thommen – Made in Switzerland Model : PR17-CNC/AC Year of construction : 1999 BOSCH Control unit The system was first owned. The machine brings an error message/malfunction in the display. Mechanically, optically, everything is very good. The machine comes from the first owner, from a German company. Phone 017621834834

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

ORT 3RP10 PLC thread rolling machine, inverter (RPM), scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die., Number of rollers: 3

used compact bread roll line König Eco Twin 9000 K6-SCHN6/B Classic Rex immediately available in stock for sale. -6-row roll line -König Eco Twin 9000 K6-SCHN/B Classic -with King Classic Rex head machine - Max. hourly output: -Year of construction 2011

ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools

Fasti 2040 x 10 mm Number of rolls: 3 rolls Roll capacity cold: 2040 x 10 mm Roll dia upside: 200 mm Power needed: 11 kW Weight: 4 ton

Brevetti E. Gasparin 50COR 2, Baujahr 1999. Industrielle Flow-Pack-Verpackungsmaschine für den Einsatz mit Folie. Ausgestattet mit Temperatur- und Geschwindigkeitsregelung, manuellem und automatischem Modus sowie einer Lichtschranke. Technische Daten: 380 V, 50 Hz, 4 kW, Gewicht 735 kg.

Manufacturer: S.M.A.R.T. Machine Type: Thread Rolling Machine Model / Type: NGP DD Year of Manufacture: 2008 Technical Specifications - Voltage / Tensione: 3 x 480V + N - Power / Potenza: 55 kW - Current / Corrente: 100 A - Frequency / Frequenza: 50 Hz - Auxiliary AC / Ausiliari A.C.: 115 V a.c. - Auxiliary DC / Ausiliari D.C.: 24 V d.c. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Primus head machine, 4 to 6 rows Hourly output : approx. 7200 lt. manufacturer depending on weight. Realistic hourly output 6,000 pieces Weight range: 40-100gr The Kövy KA 1/6 is a high-performance, six-row sliced roll line for artisanal bakeries, which is traditionally often combined with a Fortuna head machine (KM 6). It processes dough pieces precisely—often in the weight range of 40 g to 110 g—and is particularly known for its wide variety of products (from classic sliced rolls to stamp and pointed rolls). Item condition: in operation, fully functional Availability: immediately Viewing: by arrangement Original price in 2022: €400,000.00

Key data: 63 t, 250 mm, 300 mm

Thread and Profile Rolling Machine Machine Type Cylindrical 2-Roll Thread Rolling Machine Max. Rolling Capacity (Force) 630 kN (63 tons) Workpiece Diameter (Min. / Max.) 25 mm / 200 – 250 mm Max. Diameter of Tools (Dies) 300 mm Spindle Diameter 110 mm Spindle Speed Range 10 – 100 rpm Spindle Drive Motor Power 22 kW Total Power Requirement (Connected Load) 26.5 kW Operating Rated Current 54 A Electrical Power Supply 380 V / 50 Hz (Three-phase current) Control / Auxiliary Voltage 110 V / 24 V Required Floor Space (Dimensions) 3072 × 2140 mm Total Machine Weight approx. 7500 – 8000 kg (7.5 – 8 tons) Design Features Twin-roller system: Works with a pair of cylindrical profile rollers. Materials: Suitable for working with high-strength steels, rods, and pipes. Application: Used in heavy engineering to create fasteners, shafts, and other components with i ...