135,042 used machines on RESALE, but how to find them? Machine Search
Battery test 50% 4th valve to carriage Auction-ID: A1-40984-23
Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used
Free-charge: 1400mm Work lights Auction-ID: A1-40984-36
Bucket with tilting function for forklift trucks BAUER type BSM 90Forklift bucket, tipping bucket, snow shovel, chip bucket, dump bucket, tipping containerFabr. No. 4421 Year of construction 1983Load capacity: 1500 kgVolume: 0.9 m³Bucket width: 1570 mmBucket depth: 1200 mmBucket height: : 550 mmDrive-in pockets: 120 x 70 mmTine spacing inside/outside: 500/740 mm- mechanical dumping device- forklift entry pockets with openings for the forks in the cargo area- orange painted with slight rustingWeight: 275
Brand engine Toyota 14Z 3rd+4th valve to carriage Auction-ID: A1-40984-7
Brand engine Cummins Without forks Oil leakage Auction-ID: A1-40984-18
The car drives but the starter is defective and the battery is flat. Needs to be checked. Auction-ID: A3-46099-17402
Half Cab, Work Lights Brand engine Yale Auction-ID: A1-40984-19
Battery is mediocre Auction-ID: A1-40984-58
Battery tested 72% License plate Auction-ID: A1-40984-20
weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Perfectly fine. Auction-ID: A3-46099-6382
no. of strokes:150 /min impact energy:420 kJ distance lower die block / ram gudeway:435 mm Throat:425 mm steel forging - rectangular up to:110 mm steel forging - diameter up to:125 mm power requirement:22,0 kW weight of hammer:3,9 t weight of anvil:3,0 t ram hammer weight:200 kg weight:6,9 t dimensions (WxDxH):1,1 x 2,3 x 2,4 m
Stock number: 3994 GABELSTABLER Manufacturer: TRUCKGAFLER VETTER , Type: 7 - 8 - 10 T Ton Year of Make: 2021 Specifications: Lifting capacity 10,000 kg Forklength 2400 mm mm Fork width 200 mm Tykkelse 60 mm
weight max. in kg: 5.500 kg Number of working hours: 2739 h weight of the machine ca.: 8,59 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of working hours: 2462 h weight max.: 8,5 t weight: 12,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...
diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...
Number of working hours: 2633 h weight max.: 8 t weight of the machine ca.: 13280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used
Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery
maximum number of results exceeded
please refine your search
500 € 
