roll form metal used for sale

Pastry line whit tools for cutting , and filler

Ctp Platesetter CRON Model TP RRP 6332 year 2022 Min: size: 450 x 370 mm MAx: 1524 x 1200 mm with Stacker

VLF Thermal CTP Screen 16000 II year 2008 MAL Sceen 16000 With Plateprocessor Kodak With Platestacker ST 125 SX Horsell Backing oven

Koppens BVE400 HD Former Stainless Koppens forming machine, comes with lots of different forming plates for different size products, previously used for hamburgers, belt 400mm, variable speed, up to 50 cycles per min, 3Ph

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Staple forming machine SpeedySeamer RAS 22.07 Production of all staples for the ventilation industry Max. profile height 20 mm Speed 16 m/min Processing stations 7 Max. sheet thickness 1.5 mm Based on strength of 400 N/mm². Lifting device for aluminum sheets Reduces pressure and prevents aluminum breakage - Straightening roller for left and right roller set with adjusting wheel - For upward straightening of bent sheets - For rounding the bend Support tables - Standard version - With right-hand sheet guide - With left-hand sheet guide

Forms spiral tubes 1 Sutter Alpha 1 from diam 120 to 1550 thickness from 4 to 12/10 of galvanized sheet Complete with automatic cut 6 m double revolving reel Tapes from 88 to 133 mm can be used.

Little used automatic horizontal packaging machine Enflex F-19 for shaping and filling bags of heat-sealed foils. The machine is equipped with a device for gluing plastic zippers. The machine is without a discharge conveyor and a dispenser. Bag size width - min. 80 mm / max.190 mm height - min.120 mm / max. 300 mm bottom - min 40 mm / max 100 mm weld width top weld 6 mm, vertical weld 9 mm Machine output 30 to 50 bags per minute

Manufacturer Kramer & Grebe Year 2000 Located in Turkey Machine is in very good condition Moulding width : 555 mm bobbin width : 565 mm

Complete set and technical characteristics of the car: Format Tool: - Format 3 pieces 1-2, 2-2, 3.2 - Package height 5 / 35-15 / 45 mm, spacers 5 mm each - The bottom of the tray is even, smooth - Perimetric sealing plate - Packing type MGS - Type of the bottom film - soft (re-equipment on a rigid film is possible). - Productivity up to 6 cycles per minute General characteristics - Film width 420 mm (+ 2 / + 4) - Film thickness up to 300 microns - Width 650 mm - Height 2200 mm - Frame length 5600 mm 7 color touch screen control panel in Russian Possibility to store 20 programs password to access settings (three levels) display of the current state of the machine program test, washing program at closed stations (30 ° C) Unwinder bottom film for 3 cores, max. Ø 400 mm compressed air - Preheat film on top - Laying length 1500 mm - Vacuum pump Busch R5 100 m3 / h ...

The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);

Multivac T700 automatic traysealer (skin) Excellent high-speed traysealer from Multivac. This pre-owned T700 is in very good working condition and is from 2014. The automatic traysealers from MULTIVAC are suitable for industrial use – for packaging foodstuffs, medical and pharmaceutical products, and industrial and consumer goods. They seal trays made from various materials, such as plastic, aluminum, cardboard, and foamed materials, as well as a large variety of cover films. These machines enable a fast and efficient pack output with gentle tray handling. Shipped without tool; Optional: New Busch 360m3/h vacuum pump; Infeed conveyor belt; Power 4,2 kW Power supply 400/230 V Height 2100 mm Width 1000 mm Length 4900 mm Weight 1300 kg

Multivac R 145: Thermoformer 2017 production. Production Germany. The machine is operational. Tray molds included.

Kramer + Grebe thermoformer, type: 3000/430, year of construction: 1991, 380 V, 3 Ph, 50 Hz, 20-25 A, Kortho Hot Printer Tiromat container with parts for thermoformer among other, large amount of dyes, consisting of: (1x) 380 mm x 215 mm, (2x) 225 mm x 180 mm, (4x) 18

Form, fill and seal machine for berlingots Form, fill and seal machine for berlingots (with or without spout) of flat pvc or eva film or any film that can be sealed by radiofrequency. Radiofrequency sealing system that allows a very good quality of longitudinal sealing and transversal sealing/cutting. Fully PLC controlled and all operating parameters can be adjusted from the touch screen. Thanks to its specific dosing unit, any kind of aggressive products can be packaged on this machine. All parts in contact with the product are made of stainless steel. Production output: 1800 to 3000 Bags/H Bag volume: from 50 to 500 ml Bag length: 70 to 265 mm Max. outside diameter of the reel: 400 mm Inner diameter: 76 mm Including product outlet belt WIRING DIAGRAMS AVAILABLE

Thermoformer Dixie Union - 15x31cm Adjusted film tensioner. Lubricated buttons. Change the lower part of the plastic suction cup. Installed new air hoses. Replaced bellows + adjusted knife. Tools, 15x31cm (2 compartments)

Thermoforming machine Manufacturer: Multivac Model: R 530 Year of manufacture: 2001 Film width 547 mm (Jumbo roll) Advancement 612 mm With dual mold sets: Ø 140 mm (9x) with stamper 132 x 140 mm (12x) For gas pack Incl. gas mixer and oxygen measuring Incl. ink jet printer and label applicator Incl. a booster pump and 2 external back pumps With central lubrication The machine has been frequently maintained and overhauled and appear in extremely good condition

I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...

ULMA TF-100 stainless steel thermoforming machine Description TF 100 thermoforming machine for packaging food or medical products. Packaging is created on the machine using rolls of flexible or rigid film. If desired, gas and vacuum injection (MAP) can be performed inside these containers. The TF series is the ideal solution to move from manual to automatic packaging systems, obtaining in a more economical solution the same advantages that are achieved over the traditional system with any larger thermoforming machine. Its characteristics make it the most suitable solution for medium productions, adapting with its standardized configurations to the different needs of each client. Its versatility, ease of use and change of formats also make it the appropriate answer as a support machine for the packaging of various products, or as a dedicated line for medium productions. Coil width: 330  ...

ULMA TF-Supra thermoformer ULMA thermoforming machine model TF-Supra It does not have a vacuum, currently used for medical paper lidding film.

Year 2011. (Not exploited) Types of packaging: • Flexible packaging • Semi-rigid packaging • Tight packaging Medium to high performance. • Ability to use various materials, such as flexible film, PS, PETS, PVC, HIPS, etc. • Maximum cycle speed of 18 cycles per minute for soft blister packaging and 10 cycles per minute for rigid blister packaging • Web width 400 mm • Cut length up to 320 mm • Depth molding 80 mm • Servo chain • Stainless steel construction.

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Thermoformer Skin ULMA TFS 300 which has normally been modified to TFS 407 Year 2012 Width 422mm Feed pitch 250mm Dimensions: (L) 5.7m x (W) 1m x (H) 2m Two tools Selvedge rewinders Integrated labelling module

It is after renovation, and after replacing the control with relays The machine is in perfect condition It has gassing - protective atmosphere - MAP 320mm film Mold 300mm x 300mm Mold 2 x 150mm x 300mm Supplied with a vacuum pump and 2 km of foil.

Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...

ULMA thermoforming machine model SUPRA from 2008 Width 422mm Double feed 250mm and 150mm Dimensions: (L) 6.3m x (W) 1.4m x (H) 2m 1 tool on the 155 pitch in round shape (bowl) Edge winders Motorised exit conveyor Integrated label dispenser Price to be discussed

Packaging machine (2008),but its in a very good condition, its like new because of the low useage. Our company had used it for packaging disposable medical devices. Every year we have done the necessary maintenance work on it. This machine is suitable for packaging in soft and hard folien as well.

Double execution packaging machine for forming, filling and sealing flat envelopes with wet wipes. The machine is in charge of folding and moistening the wipe, forming, lower sealing of the envelope, introduction of the wipe inside and upper sealing. Minimum format: 2 x (45 x 45 mm and 1.5 cc dose). Maximum format: 2 x (65 x 130 mm 20 cc dose). Min/max speed: 45 / 110 upm DOCUMENTATION AVAILABLE

Continous Form Collator Micro Pack S 50 Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll  umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Use PackLine PD4 Premade Horizontal Form Fill Seal with: Operate with fillers for liquid, dry or powdered paste and hot products. Output: 35-40 Pouches per minute Compressed air: 500 liters per minute (2) Seal bar width: 10 inches Bag size: 8.1 inches x 10.24 inches Voltage 208 Electrical Phase 3Ph Hertz 60Hz

Multivac R085 Seeking an entry-level thermoformer with exceptional adaptability? Look no further than the Multivac R085! This powerful machine seamlessly integrates into diverse production lines, tackling standard applications with an impressive level of configuration. Unmatched Versatility: 5 Diverse Tooling Options: Choose from 1×1, 1×3, 2×2, 4×1, or 4×2 configurations to perfectly suit your packaging needs. Flexible Packaging Sizes: Create packages ranging from 100×97.75mm to 375x185mm, accommodating various products. Adjustable Forming Depth: Adapt to product heights up to 80mm for optimal presentation and protection. Additional Highlights: User-Friendly Operation: Streamline your workflow with an intuitive interface. Durable Construction: Built to last in demanding production environments. Cost-Effective Solution: Ideal for businesses seeking performance without break ...

Welding edge former, welding bevel former, weld seam preparation, welding edge forming machine, edge milling machine, edge milling machine, mobile milling machine -Manufacturer: Knuth, edge milling machine type 101355 JT-186 -Drive: 0.75 kW -Table length: 500 mm -Angle: adjustable 15 to 45° -Dimensions: 500/360/H290 mm -Weight: 26 kg

Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm

Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used

Polytype BDM 681 Polyflex, for round cups, age 2014 only used for less than 20,000 hrs. The pre-treatment and the UV-Mandrel curing are integrated in the basic machine concept. The newly designed cup in-feed and discharge automation round off the system. The main characteristics of BDM 681 printing technology are the very high effiency, the outstanding print quality, the short change-over time as well as the excellent accessibility and ergonomics (one operator layout). Technical data: Min./max. cup height: 35 -200 mm Min./max. rim diameter: 60 - 185 mm Min./max. taper: 2 - 15° Max. print height: 145 mm Max. print length: (6 sections) 273/345 mm Max. print length: (3 sections) 418/502 mm Max. printing speed: 650 cups/min Servomotor Universal Screw Denester UV Unit with dual 6" UV-Lamps FHW 3.0 CP Corona Pretreatment with Leak Tester. The Print Heads are modern day Print Heads ...

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

incl. Auto Plate Loader (1 segment), automatic plate feeding from the pallet, maximum plate format 1296 x 2083 mm, maintenance contract, in good condition, with online processor on request available at short notice, Price on request

TRUMPF 500 R with full automatization LARGE FORMAT 3000mm x 1600mm In good working condition. Fully regular serviced and maintained -new hidraulic pump in 2023! New/Year: 2000 Included: -sheet master -grip master -lift table Control Unit: -Bosch Punching force: -220 kN

Veripack TFH18 PITCH 300 Thermoforming Machine. Year of production 1993, completely overhauled in 2019. Type of packaging thermoformed with flexible film. Equipped with n. 6 forming molds of various sizes.

-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”

COLLATOR SERMAR -Year 1998 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Numbering unit with cams -Many gears size : 5 ½”- 6”-8”-11”-12”

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

LEISTER TRIAC heat gun, heat gun. Embossing on the device: K.LEISTER TYPE TRIAC CH-KÄGISWIL Motor 60W 220V ~6.6A Max 1460W 12820 Made in Switzerland GS S+ Used, very well preserved with signs of wear. Includes accessories, as pictured. Two-stage Cable length 3m Machine for processing and welding plastic geomembranes, shrinking plastics, films and other applications.

Table Device Stainless Steel Tricher Screw with electric drive for 100 mm Elisen / Gingerbread Manual operation Connection 220 V Used appliance cleaned Another 400 bakery machines in stock!

Multivac R230 type Thermoform, is a high-performance roller machine. One mold included. Film width: 2900 mm Year of production: 2001 Electricity supply: 400V 50Hz 3N Total power: 8 kW Vacuum cleaner in equipment Vacuum, protective atmosphere Optical film sensor Very good condition, ready to work, machine after technical inspection.

Capacity: 100 t Stroke: 355 mm Die length: 585 mm Die width: 620 mm Hydraulic pressSack Kiesselbach - HSVP 1000  Hydraulic cold hobbing press Swaging (wire rope clamps) Cold flow pressing (non ferrous material) Medal coining Bottom ejector Capacity Kg:           100000 Distance between column:585mm Table Length:          585mm Table Width:           620mm Table Height:          1000mm Ram stroke:            355mm Approche speed:        200mm/min. Working speed:         8.5mm/min. Return speed:          200mm/min. Power:                 37kW Length:                3700mm W ...

Framefilter format 600x600 with hydraulic pump. -WIth 10 frames -EX-protected. -without cylinder. Number available (price per tank): 1 Plate formats: 600x600 More then 300 machines new and second hand on our seema .de

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

ILLIG RDM54K, age 2006 Preheater ILLIG VHW 72, 2-Roll ILLIG RDM54K with Indramat Servomotor Indexing Max. Film width 545 mm Double Heating, Heating Capacity 45.10 kW Max. Form area: 520 x 300 mm Indramat Servomotor Plug Assist Max. depth Draw: 125 mm Auto Transport Rail Spreading for PP Auto. Sheet Sag Control Inline Counter/ Stacker ILLIG SZA Inline Grinder ILLIG RS75b (High Version) with blower Siemens SIMATIC MULTI Panel Color Display, with Touchpad Controls Siemens S7 PLC