roll clamp used for sale

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

pressure: 0,2-40 t max. workpiece diameter: 70 mm threading length: 120 mm Control: total power requirement: 29 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a used, reconditioned WP bunroll line type Rollmeister Basic Line SC 37 (without head machine) for sale. - line complete stainless steel design - The following products can be made: sliced rolls, round / smooth dough pieces, baguette rolls, hot dogs, ribs - Capacity range: approx. 3,650 pcs/h - Weight range: - round dough pieces (sliced) 40gr. – 65gr. - long-rolled dough pieces (cut and uncut) 40gr. – 65gr. - 3-row operation: 40gr. – 85gr. - round / smooth dough pieces over pretzel discharge 40gr. – 85gr. A WP Multimatic head machine can be offered on request. Price on request.

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

pressure: 20 - 300 kN adjustment of rolling slide: 50 mm diameter of rolling spindle: 120 mm roll spindle height over machine bed: 200 mm Control: SIN 840 taper length of the roll spindle: 200 mm rolling spindle turning speeds: 0 - 50 1/min torque per rolling spindle: 2700 Nm power capacity: 2 x 8,4 kW distance between rolling spindles: min. 271 / max. 368 mm rolling tool outer diameter: max. 300 mm total power requirement: 26 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling Promot loader cell Complete housing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric roll Bending Machine 3 rolls Capacity: 800 mm x 3 mm Rolls diameter: Ø 105 mm Motor: 4 CV New electrical panel Front/back rotation Voltage: 220 V Tri (possibility of reversing the motor in 380 V) Equipped with: Emergency stop Equipped with: Protective cover Dimensions (L x W x H): 2000 x 1300 x 1300 mm Weight: approx 1,5 T

Welding Width: 900 mm // Bag Length (Max): 10000 mm

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

Dimensions (L/W/H): 1650x460x120 mm Weight: 31 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Roller conveyor / roller conveyor with drive Condition: Used Model: Drive: Flat Belt Year of Make: 2013 Total length: approx. 33500 mm -consists of 12 parts: 1x approx. 1500 mm, 1x approx. 2000 mm, 10x approx. 3000 mm -result in 4 different systems: 1x 6500 mm, 3x 9000 mm Total width: approx. 650 mm Conveyor width: approx. 595 mm Roll diameter: approx. 50 mm Roller spacing/ center distance: approx. 50mm/ 100mm Material: Steel Frame height: approx. 120 mm Frame depth: approx. 25 mm Colour: green Including SEW motor (0.25 KW) Price per meter Feet to be ordered separately Internal Article Number: 2026021101 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent pa ...

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Key data: 1000 mm, 450 mm

Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel

Roller / roller for pastry lineProduct description:Manufacturer: RheonType: 818Condition: used, not testedOuter dimensions: 95 x approx. 100 x 33 cm (WxDxH)Details see pictures

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor on: wheels -Roll diameter: 60 mm -Roll distance: 160 mm -Roll width: 400 mm -Roll height: 290 mm -Transport length: 800 mm -Dimensions: 1120/580/H340 mm -Weight: 42 kg -Total height of roller conveyor: approx. 285 mm -Transport dimensions: 1990/1015/H285 mm -Weight: 130 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, -Ideal for: band saw, cold circular saw, ... -Execution: difficult -not powered -Roll width: 410 mm -Transport length: 2000 mm -Roles: Ø 48 mm -Roll distance: 390 mm -Total height of roller conveyor: 660 mm adjustable -Transport dimensions: 2000/680/H660 mm -Weight: 214 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor, -Ideal for: band saw, cold circular saw, ... -Execution: difficult -not powered -Roll width: 540 mm -Transport length: 2670 mm -Roles: Ø 55 mm -Roll distance: 250 mm -Total height of roller conveyor: 810 mm adjustable -Transport dimensions: 2670/640/H810 mm -Weight: 234 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -pneumatic: braked -not: driven -Roll width: 390 mm -Transport length: 1500 mm various lengths -Total length: 0.97 m -Roles: Ø 56 mm -Roll distance/center distance: mm -Total height adjustable roller conveyor: 640 mm -Price: 0.97 m -Dimensions: 450/980/H640 mm -Weight: 60 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction -with: Side stop movable via hydraulic motor in transverse direction -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: powered -Roll width: 600 mm -Rollers: O 80 mm -Roll distance: 150 mm -Total height of roller conveyor: 300 mm -Total length: 80 m -without motor -Price per meter: 45 EUR net / m

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with: pneumatic lifting device -Stroke: 35 mm -not: driven -Roll width: 585 mm -Transport length: 2000 mm -Rollers: Ø 80 mm -Roll distance: 220 mm -Total height of roller conveyor: 205 mm -Transport dimensions: 2070/930/H205 mm -Weight: 264 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not: driven -with: material brake -Roll width: 500 mm -Transport length: 1080 mm -Rollers: Ø 80 mm -Roll distance: 200 mm -Total height of roller conveyor: 205 mm -Number: 17x transport trolleys available -Price: per piece -Transport dimensions: 1200/620/H980 mm -Weight: 42 kg/piece

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -not powered -Number: 4x roller conveyor on wheels -Track width: 2220 mm -Roll width: 500 mm -Transport length: 2600 mm -Rollers diameter: 80 mm -Roll distance: 170 mm -Total height of roller conveyor: 300 mm -Transport dimensions: 2600/1500/H1070 mm -Weight: 340 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Drive: electric -2x drive motor roller conveyor: 0.75 kW -without drive motor conveyor chain -without conveyor chain -without raising -Roll width: 840 mm -Conveying length: 2300 mm -Transfer of conveyor chain: 4700 mm -Diameter roller: 50 mm -Delivery height: 400 mm adjustable -Dimensions: 2400/5400/H400 mm -Weight: 1200 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: Saw roller conveyor, 2 pieces / one-sided with stop rail -Roll width: 250 mm -Transport length: 2130 mm -Rollers: Ø 50 mm -Roll spacing: 300 mm -Total height of roller conveyor: 880 mm -Transport dimensions: 2130/400/H250 mm -Total weight: 73 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven, 4 sections -Roll width: 795 mm -Rollers: Ø 60 mm -Roller spacing/axle distance: 100 mm, 7 wheels are missing, see photos -Total length: 7.96 m -Dimensions: 4x 1990/970/H135 mm -Price/tax: complete -Transport dimensions: 1990/970/H540 mm -Weight: 363 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, on a rotating base -Base: Ø 1100 mm -Roll width: 795 mm -Rollers: Ø 90 mm -Roller distance/axle distance: 100 mm, 4 wheels are missing, see photos -Total length: 2.0 m -Dimensions: 2000/1100/H300 mm -Weight: 278 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 1.65 m on a solid base frame, height adjustable -Roll width: 400 mm -Roller diameter: 57mm -Roller spacing: 195 mm -Height: 655 to 1140 mm, one foot is missing -Transport dimensions: 1650/500/H655 mm -Weight: 27 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: 2-part 1.8/1.5 m / 1 part mobile with material brake -Roll width: 490 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Price/Delivery: complete -Dimensions: 1800/520/H970 mm / 1500/640/H290 mm -Weight: 78 kg / 35 kg

roller conveyor, conveyor track, roller conveyor belt, roller conveyor, pallet roller conveyor -Roller conveyor: 45 sections, 39 x 2.39 m / 6 x 2.79 m -Brake roller: Distance every approx. 1.3 m -Total length: approx. 110 m -Roll width: 855 mm -Rollers: Ø 60 mm -Roller spacing: 150 mm, see photos -Dimensions: 2390/955/H90 mm / 2790/955/H90 mm -Price/Delivery: complete -Base: various heights in stock, see ID 35351 to 35358 -Transport dimensions: mm (4 pallets) -Total weight: 3357 kg

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Rack Trolley for Daub Thermo Roll 86x85cm - Rack trolley for Thermo Roll oven - Extra deep rack trolley - with 10 pads

Roll line WP Rollmeister - WP Rollmeister - 4 rows - Stainless steel - Rollmeister bread roll line - Details see pictures

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Roll line WP Multimatic MUS Rollmeister SC 51 Year of Make: 2009 Suitable for sliced rolls, round rolls and long rolls Max. hourly output: approx. 5,100 pieces Weight range (without fermentation): 30-90g Weight range (cut bun): 40-65g Pre-proofer I (before long rolling): 6 min Pre-proofer II (after long roller until cutting): 6 min Multimatic MUS 4-row dough dividing and rounding machine Pressure roller on spreader belts after the head machine Long-knit station Pressure roller in front of cutting station, height-adjustable Cutting station Bypass for green operation without proofer Depositing device for

Compact roll line WP Rollprofi Year of Make: 2005 Condition: repaired, cleaned & checked Suitable for the production of sliced rolls, smooth rounds, long-rolled rolls and double pieces Weight range: 30-85 g Hourly output: max. 3,750 pieces 4-row system with 600 mm working width Integrated dough divider and drum rounder, Multimatic Pre-proofing time 12 min (6 min in front of long roller station and 6 min between long roller and cutting station) Hanging drying Maintenance-free suspension chain with automatic tensioning Variable depositing device for fermentation carriers of 3 Euro sizes:400x600

- Compact bread roll line - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Rollprofi - Suitable for the production of cut rolls, long-rolled rolls - 4 rows - Hourly output for 4 rows: 3750 pieces /h - Pre-proofing time: 6 minutes - Pre-proofing time between input and side discharge belt and 2000 pieces per piece - Pre-proofing time for double cut: 3 minutes - Pre-proofing time between input 6 minutes and long scooters: at max. power - Year of construction 2018 - Outer dimensions: Width: 305cm Depth: 115cm

SIDEL Rollquattro Labelling Machine Type: Rollquattro F15 18T Year of Manufacture: 2009 Capacity: up to 18,000 bottles/hour Technical Details: Number of bottle plates: 18 Plate movement system: Mechanical cam control Label cutting adjustment: Manual setting at the labelling station Available Change Parts: 0.5 L PET bottle 1.0 L PET bottle 1.5 L PET bottle 2.0 L PET bottl

Dima rolvormlijn voor de productie van Hibond 55 profielen - voor betonnen vloeren. De Hibond 55 is een 55 mm diep trapeziumvormig vloerprofiel dat wordt gebruikt als lichtgewicht vloeroplossing. Diktebereik: 0,75 gt; 1,5 mm Maximale plaatbreedte: 1200 mm Rolvormlijn: - 13 + 10 stands - asdiameter: 100 mm - center-center afstand tussen rollen: 180 gt; 350 mm

Description Item # 8085 – MINI CONBAR FORMING ROLLERS Manufactured by SOLLICH Mini-Conbar Forming Rollers, Year 2014, in excellent like new working condition, very little use. Including Paper Reel Feeder, 1st Roller is 280mms wide x 320mms diameter, 2nd Roller is 320mms wide x 480mms diameter. Also includes a SOLLICH FKL-S 15 Chiller Unit, Year 2014, supplying cold water to the drums for cooling.

Description Item #8766 - 5-ROLL REFINER Manufactured by CARLE & MONTANARI Model Hydrostatic.B.1300 1300mms wide Rollers Last used on Chocolate & Creams, with fat percentage between 23 & 28% Has been well maintained whilst it was in production, no longer in production Production capacity of around 600-900Kgs Per hour at 20Microns.

Description Item #8924 - (2) STONE 3-ROLL REFINERS 3-Roll Stone/granite Refiners/Melangeurs Used to produce Marzipan One is a PHARMAFA DW3 with 500mms long rollers One is a ARTOFEX with 400mms long rollers

Description Item # 9092 - (7) BISCUIT ROLLWRAPPING MACHINESManufactured by SIGModel GTP RollwrappersModel ZEP Biscuit Feeders/Loading Machines, stack lengthSuitable for Rectangular, Round & Square Biscuit Rollwrapping, including crackers & sandwich biscuitsEach GTP is up to 60 packs per minuteMachine size range from minimum 90 x 40 x 36mms high, 40mms diameterTo maximum 280 x 80 x 70mms high, 70mms diameterServo based IRT Controls

Description Item # 9319 - BAR FORMING/EXTRUDING ROLLERS Manufactured by LEKOS (Slovakia) Model EXT-1020 Year 2016 1000mms working width SIEMENS Simatic HMI Plc Controls Set of Three (3) Forming Rollers (vertically stacked) Previously being used for Nougat Mass, Caramel, Syrup Layer Including Supporting Frame, Extruding Rollers, Cooling/Heating of the Rollers, Height adjustment of the top & middle roller, Mass Scrapping Mechanism, Mass Greasing Mechanism, Extruder Mass Storage Top Roller with 440mms diameter, Other Two Rollers with 630mms diameter Top Two Rollers can be adjusted, Bottom Roller is fixed Product thickness can be adjusted from 0 up to 30mms thick With Cold water Glycol Cooling Unit, to cool the rollers Still set up in the factory but no longer in production overall dimensions: 2851mm high x 1490mm deep x 2630mm wide weight: 3100kg

Description Item # 9229 - LINE TO PRODUCE STAMPED ROLLS, BUNS & MINI-BAGUETTES Manufactured by BACKTECH Was being used to produce frozen part-baked products Products with a weight of 40 to 90grammes Designed for one person operation Machinery built in Year 2002 Capacity up to 6000 pieces, depending on product & weight With APV PAVAILLER Spiral Mixer, Model S125CF, 200Kgs capacity, fixed bowl, 2-speed forward, 1-speed reverse Line also includes : Mega-Star Model: MS 5/30-100 Dough divider moulder with 5 pockets Manual feeding through a hopper Quickly interchangeable dividing pistons Belt round moulder Exterior moulding drums (honeycomb drum) Touch-screen control for recipes adjustment Height of the spreader belts: 800 mm Weight (approx.): 900 kg. Power: 1.5 kW. Size (W x L x H): 900 x 1530 x 1750 mm. Vario-Star Duo Model: VSDK/L 5-4-3 Output: 6000- 4800- 3600 round and long formed rolls 1 ...

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Roller guide: for profile steel shears, flat steel shears... -Roller spacing: approx. 84 mm -Dimensions: see photos -Dimensions: 245/143/H70 mm -Weight: 5.4 kg

approx. 50- 60m driven roller conveyor conveyor, Blum, with 180 degree curve – used - Ex-site price (net): only 8.500.-€, dismantled, packed and loaded! Manufacturer: Blum Year of Make: 2011 Type: Roller conveyor with drive Roll diameter approx. 5cm Roll spacing: approx. 5cm Roll length: approx. 59cm Element width approx. 61cm approx. 50 – 60m (exact length has yet to be measured) 1x 180 degree roller conveyor curve Sale incl. feet etc. Current height approx. 80cm 230V/400V Condition: good Available: immediately Location: Erfurt area

Key data: 250 mm, 600 mm

24” wide x 10” diam. Two Roll Mill Emergency stop button at the front of the machine & a guard above the roller

Key data: 150 mm, 300 mm

Francis Shaw 300mm (12") wide x 150mm (6”) diam Two Roll Lab Mill Even and friction