roll clamp used for sale

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

table length: 4000 mm table width: 2000 mm table height: 600 mm number of T-slots: number of T-slots: 6 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Length: 600 mm Width: 300 mm

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Swivel cube table for radial drilling machines Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg

7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc

Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request

Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg

two cubes 1850x1200x700mm weight of one 1850kg one has some cracs on the ribs but can be welded Price for both pcs 5000eur

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

2pcs 3500 x 2000 x 350 mm

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 130 mm -Plate thickness: 20 mm -with: support ribs -Weight: 112 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Bores: Ø 18/20 mm, see photos -Number: 2x angles available -Price: per piece -Dimensions: 165/140/H245 mm -Weight: 13.1 kg

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

Electrical magnet size 1000 x 300m 110 volt supply IP 66

we have on stock these cubes for sale: 7 pcs 1000x750x400mm 12 pcs 1000x800x600mm 6 pcs 1250x1000x750mm

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t -Dimensions: 230/110 / H450 mm -Weight: 22 kg

Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm

Clamping car Braun WES fully hydraulic with auxiliary trolley with tracks

Plate plate made of cast iron with longitudinal grooves and mounting holes, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12. - 4 plates with dimensions 3,000 mm x 1,200 mm x H 300 mm.

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg