126,606 used machines on RESALE, but how to find them? Machine Search
Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
Used, technically overhauled reinforcing steel bending machine. Rotation of the bending plate 5/7.5/10/15 Power requirement 3.15/3.65 KW 2 footswitches with emergency stop function. Bending capacity max. 1 piece 45mm D. Reinforcing steel or 3 bars 28mm D. The control system is upgraded to Siemens Touch Display CC. Latest standard. 1 set of standard bending tool.
2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling
Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90
Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions
P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.
Used machine in good condition. Available for immediate delivery.
Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm
Decoiler D = 1000 Auction-ID: A7-46309-16
Key data: 1000 mm, 1 mm
with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm
Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm
Used machine in good condition. Available for immediate delivery.
Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg
WILA Table - Stroke max: 200 mm - Working area: 3.100 mm - Pressure force: 160 t - Bending length: 3.100 mm - Axes: 6 - Working speed: 10 mm/seg - Control: CYBELEC ModEva 10S - Weight: 10.500 kg
Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm
Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A ...
Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm
Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm
Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5)
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.
Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm
including various tools; Extra option profile bending unit
Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it.
with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg
Length of mandrel: 4mtr ; With various sizes of molds
Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.
UD = double bending; complete with set of tools; CNC controlled backgauge; hydraulic top clamping
Sommer S42 hydraulic mandrel bending machine ; with 6 meter long mandrel and complete with tooling and accessories; suitable for bending pipes and pipes in steel, stainless steel, aluminum and copper; Voltage: 380 volts ; Power: 4.6 kW ; Steel capacity: 42.4 mm x 3.25 mm ; Minimum bending radius: 40 mm ; Maximum bending radius: 120 mm ; Bending jigs; 15mm R40, 18mm R40, 22mm R45, 28mm R55, 35mm R70
Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 55 t - Bending length: 2.050 mm - Axes: 8 - Working area: 200 - 1.770 mm - Distance between uprights: 2.100 mm - Returning speed: 180 mm/seg - Frame type: O-frame - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 5.000 kg - Dimensions (long x wide x high): 3.388 x 2.385 x 2.555 mm
Stored in working condition, buyer must provide transport himself. No elevator available.
Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm
This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.
Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg
Used machine in good condition. Available for immediate delivery. - Table width L -R: 200 mm - Operating hours: pending - Pressure force: 400 t - Bending length: 6.000 mm - Axes: X-R-Z1-Z2-X - Working area: 0 mm - Distance between uprights: 5.050 mm - Working speed: 11 mm/seg - Returning speed: 120 mm/seg - Throat: 400 mm - Stroke max: 300 mm - Oil tank capacity: 500 l - Power: installed max: 42 kW - Weight: 37.000 kg - Dimensions (long x wide x high): 0 mm
maximum number of results exceeded
please refine your search
100 € 
 ES-2.jpg)
