roland 305 used for sale

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Conveyor belt / transportation belt -Length: approx. 8120-8340 mm -Belt width: approx. 305 mm -Gear Motor / hygiene engine as good as new -Plastic link conveyor belt (Intralox/Habasit/Ammeraal)

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

Manufacturer: Risco Intestinal holding device of the company RISCO: Intestinal holding device type RS 153 for filling machine RS 1040 , RS 4000, RS 4001, RS 5001 Extra accessories: holding rollers, filling tube, mounting kit Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko biala USt-IdNo.: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Groove width: 23 mm -Dimensions: 145/100/H220 mm -Weight: 5.5 kg

Level shifter, level shifter, converter, level adjustment -Manufacturer: pilz, level adjustment type V24/RS485 -Interface: 9 25 pin -Voltage: 220V -Dimensions cardboard: 155/100/H80 mm -Weight: 0.4 kg

Bezel, stick, lynette -max. passage: Ø 450 mm -Tip height: 305 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 880/100/H870 mm -Weight: 169 kg

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

Jaw width: 160 mm Jaw opening: 305 mm Dimensions, approx.: L 570 x W 250 x H 130 mm Weight, approx.: 50 kg

Starter Delko-Remy -Voltage: 12 V -Type: 1108 2 7A 14 -from forklift: Still EFG 1.0/5002 -Teeth: 10 -Dimensions: 305/180/120 mm -Weight: 11.5 kg

x 406mm Y 305mm Haas control Max spindle speed 6000 rpm Main spindle power 6 kW Tool magazine 10 pcs. SK 40 cone Dimensions 2.0 x 2.0 x 2.5 m Weight approx. 2.2 t

MAXIMUM ROTATING DIAMETER: 200 MM MAXIMUM TURNING LENGTH: 300 MM MAXIMUM TURNING DIAMETER: 160 MM BAR PASS: 41 MM COURSE ASSE X1: 175 MM COURSE ASSE X2: 132 MM COURSE ASSE Z1: 305 MM COURSE ASSE Z2: 155 MM QUICK X-Z AVANZAMENTS: 12 - 20 M/MIN MANDRINO: 100-5000 RPM; 11-15 KW; ASA 2-5 CONTROMANDRINO: 100-5000 RPM; 3.7-5.5 KW TOOL-HOLDER: 12 POSITIONS CONTROL: FANUC 18i-T WEIGHT: 4900 KG INGOMBRO: 3650 x 1940 x 1830 MM

Tops SJA-1530-1H-1P Water Jet Cutting Machine Max. working press : 4136 bar Cutting area : X:3050 Y:1550 Z:200

Thermal/thermal transfer printer for printing labels Print speed (max): 305 mm/s (12ips) Mounted on a stand Possibility of attaching to the production line with adjustable height and angle of inclination. The label is applied by blowing the label onto the packaging after triggering with a photocell.

This delta 703 bundle delivery from 2016 has a working width of 700 mm with 3-fold banding. Equipment: Automatic format recognition and waste sheet recognition Press station with pre-pressing and main pressing, with main press roller Package Pressing Vibrating station Auto. Format Setting Quick Adjustment, Counter, Bar Bundling Package height: min. 20 mm Package height: max. 150 mm Capacity: 600 packets/h per panel Speed: up to 60,000 pcs./h Speed: 15-205 m/min Beidddwlcgh Inlet height: 410mm - 1000mm Electrical connection: 6KW Compressed air: 6 bar dry air, consumption 450 ltr./min. to be provided on site Format min. (without small format device) inlet width 110mm x infeed length 95mm Format min. (with optional small format device not included) Inlet width 90 mm x infeed length 65 mm max. 1 panel 760 mm x 305 mm max. 2 panels 335 mm x 305 mm max. 3 panels 235 mm x  ...

- Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

chamfer lenght: 3050 mm plate thickness: mm distance between columns: 3050 mm pressure: 100 t stroke length max.: 250 mm travel -x axis: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: TMJ Max.cutting range: 360 x 305 mm Cutting speed:10 ? 100 m/min Saw band dimension: 3660 x 27 x 0,9 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Czech Republic

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

Condenser GUENTNER Type: GVH 090.1A/3-N(D) Cooling capacity: 305.5 kW Air volume flow: 89 400 m3/h Number of fans: 3 x 900 mm Dimensions: 6600 mm x 1140 mm x 1500 mm Volume: 89.2 l Number of pieces in stock: 1 Reference number: SK17 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

DURMA IW 55/110 BTD ironworker machine manufactured in 2014 in Turkey helps to significantly increase production efficiency while keeping operating costs low. The highly versatile and multifunctional machine has a rigid and stable frame made of steel plates with 5 work stations for precise hole and corner punching, as well as cutting flat bars, angle bars and solid bars. The DURMA hydraulic ironworker machine guarantee excellent cutting quality throughout their service life, thanks to the use of a hydraulic cylinder with a centrally located actuator. The total weight of the machine is 1660 kg. Technical specifications of the DURMA IW 55/110 BTD ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - cylinder stroke: 50-60 mm - number of cylinder strokes (20 mm stroke): 37/min - reach: 510 mm ...

For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...

Wohlenberg VARIO S perfectbinder Technical Details No. 82298 Year: 1988 Size: max- 305 x 460 mm min- 105 x 140 mm Ticknes: max- 60 mm min- 2 mm Open size: max- 655 x 470 mm min- 210 x 140 mm Speed: 7000 tact/h Equipment: 26 clamps, central adjustment for clamps ect Additional Information Typ: Wohlenberg Year of man. 1988 Condition: very good Available: immediately Description Wohlenberg 460 gathering machine Format: max- 320 x 460 mm min 70 x 105 mm Speed: 7000 tact/h, 16 automatic stations Wohlenberg trimmer 44 FM Uncuted size: max - 315 x 460 mm Cuted size: max 300 x 440 mm min- 70 x 80 mm Speed: max - 3000 tact/h min - 1200 tact/h Wohlenberg ZS 12 (booklet stacker) Size: max 410 x 10 mm min 145 x 90 mm Ticknes: max 60 mm min 5 mm Speed: 12.000 tact/h

Shrinking tank /Mobile Dip Tank / INAUEN VC 999 tank 62.41 i Manufacturer: Inauen VC 999 Type: 62.41 i Connection: 400 volts, 50 Hz Chamber size: 600 x 400 mm Request an offer Sinter-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

Cutting Length 3050 Mm Max Cutting Thickness 6 Mm Rear Register Stroke 1000 Mm Angle Variation 0°30′ – 2°30′ Engine Power 7.5 Kw

Manufacturer: Karpowicz NK-17 Year of construction: 2015 Power supply: 400 V / 50Hz Power: 1.1 kW Dimensions: length 1740 x width 750 x height 2050 mm Weight: 320 kg Intended for injecting red meat, with or without bones Injection pressure adjustment Touch control panel PROFACE GP4100 The number of needles 17, needle thickness 4 mm The width of the conveyor belt 250 mm The height of the rise of the needles is 190 mm Adjustable belt travel: 9 + 35 mm Number of measures: 13 + 60 measures / min Maximum capacity up to 1 t/h Brine tank with filter system Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Used CMC SH30 Overwrapping machine composed of: - newspaper format feeder - newspaper folder - 3 feeder - staker (Robot 305 PMS) - Ceccato worm screw compressor

Capacity 3050 x 6 mm Electrically adjustable back gauge

Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Capacity 3050 x 6 mm Adjustable backgauge

The machine is in perfect technical condition. Pressing force: 130t Max. sheet length: 3050mm. Upon prior arrangement, the possibility of inspection in progress.

Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...

Motor for trimmer BETTCHER type UN-84 Power: 440 Watt Power supply: 230 V without handle and circular blade We also offer: Blade - Knife 1000 - 183141 Blade - Knife 1400 - 183142 Blade - Knife 500 - 183142 Guide rail 1000 / 1400 - 183143 Toothed bushing 183154 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Capacity 3050 x 6mm Touch screen control Electrically adjustable backgauge and cutting gap High support table at the rear with return to sender Small parts are ejected at the front

3 compressors and a refrigerant dryer, Boge, S40 and S50, DS180 – second-hand - : Prices ex location (net): S40 /Year 1999: 1.950.-€ S40 /Year 2004: 2.450.-€ S50 /BJ 2004: 2.650.-€ DS180: Boge Compressed Air Systems offers three compressed air screw compressors and a cold drying system: Manufacturer: Boge Type: S 40 Machine No:30888 Year of construction:1999 Hours: 14,600 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 40 Machine No:46920 Year of construction: 2004 Hours: 28,400 Pressure: 10bar Flow rate at 10bar:4.30 m3/min Drive motor: 30kW --- Manufacturer: Boge Type: S 50 Machine no: 30574 Year of construction:1999 Hours: 37,200 Pressure: 10bar Volume flow at 10bar: 5.40 m3/min Drive motor:37kW --- Refrigerant dryer Manufacturer: Boge Type: DS180 Machine No:398348580002 Flow ...

Intestinal holding device Vemag DHV Type 836 for full machine Vemag Without extra accessories: holding rollers, filling tube, brakes and without brake lip. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

Single-chamber spray cleaning system FRANKE SRF-1000 l-RRS - Year of construction 09/2001 - 3 tanks -Stainless steel - Thermal insulation of the system - Spraying system arranged on all sides - Spray pipes with nozzle loading - Thermostatic heating control - Overheating protection for heaters - Level monitoring - Steam extraction fan - Removable filter basket - Lifting door with electromechanical drive - PLC control - SRF with special usable height and sliding door as well as transverse transfer carriage - Cleaning medium: water-soluble, non-flammable cleaners - Usable dimensions 1450x1450x1000 mm – 1000 kg - Electrical connection 3x 400 V 50 Hz + PE + N - Compressed air connection 6 bar - Fresh water connection 1/2" - Transport data System 3050x2200x3000 mm – 3000 kg Cart 1100x1150x300 mm – 45 kg Transverse sliding device 3800x1200x930 mm – 60 k ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools

Manufacturer: Handtmann Type: 34-5 Calibration gear type 34-5 Fur Handtmann VF 50, 80, 100, 200, 300 and for all from the series VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + easy & fast installation & operation + Housing made entirely of stainless steel + can of course also be combined with an ice water system + Device automatically opens the required water supply, hot/cooled water + performs the right mixture until the desired temperature is reached + powerful electronic system, microprocessor-based + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + digital display of water temperature and quantity + Temperature is set with thermostatic mixing battery (rotary knob) + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x drain hose (2 meters length) with hook Technical data: - Dosing quantity: 0.1 - 99.9 litres or 1 - 999 litres - Temperatur ...

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min

Manufacturer: Edelmann Model: Roland Practica 00, no plus version Year: 1997 Status: very good, well-kept condition -super register, rollers in order, 2nd used roller set available, application rollers with lateral friction -Powder device -new cylinder gripper pad made by the mechanic -Alcohol film dampening unit with circulation cooling Prints: approx. 5 million prints (no total counter available) -Register punch and mounting film in addition, all manuals and setting instructions available -Small format device - at ground level -Superblue delivery drum Delivery from December 21st, 2020, collection by January 15th, 21st at the latest Price: on request

Digital X-way 700 mm Y-way 250 mm Z-way 490 mm Spindle speeds 38 - 1510 rpm. Recording ISO 40 Feed 6 - 1050 mm/min Rapid speed 3500 mm/min Clamping area 1100 x 305 mm Universal milling head 0° - 270° swivel Dimension 1930 x 1560 x 1720 mm Machine weight approx. 2100 kg

Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph

This VOEST ALPINE WNC 500 S/1.6 Lathe was manufactured in 1992 in Austria. It is equipped with 2-axis (Z-travel 1715mm, X-travel 305mm), a SIEMENS SINUMERIK control. This machine stands out for its stability and is in well maintained condition with direct availabilty. See original tech specs attached.

This DMG CTV 250 (V3) Vertical Lathe was manufactured in the year 2008 in Germany and has 44158 production hours, of which 30517 are spindle hours. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 5000 rpm.