roland 305 used for sale

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

sheet width: 3050 mm plate thickness: 2,00 mm distance between columns: mm stroke: 250 mm bending beam adjustment: 80 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,35 x 2,50 x 1,60 m • CNC-controlled backgauge 1000mm • NC control Midomat 2000 • Bending rail: 20mm • 45 ° sharp rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

Sheeting machine Seewer Rondo SSO 62Manufacturer : Seewer RondoType : SSO 62Belt length right : W 130cm D: 62cmBand length left : W 160cm D: 62cmTotal, maximum dimensions WxDxH approx.: 305 x 115 x 120 cmmovable, with brakeswith safety switchDetails see picture

I sell a 3-axis CNC machining center SCM Morbidelli Author A630S with truss table Year of construction 2004. Configuration: 3-axis main spindle SCM 6.6kW 24,000 rpm Tool magazines 2 x 6 positions ISO30 on the head Second 3-axis main spindle SCM 6.6kW 24,000 rpm Second tool magazine 6 positions ISO30 on the head 1x groove saw X-direction Drill head 12+4+4 drilling spindle fully equipped Usable work surface 3050x1370 x Z 180mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Pump Gardner Denver 215/260 m3/h. Xilog Plus new software with operating instructions. Very good condition. Available the same.

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: KELCO 90 Technical data Centre height: 225 / 305 mm Distance between centres: 1000 mm Travels: Z axis: 1160 mm X axis: 350 mm Workpiece weight on centres max.: 200 kg Diameter: 449 mm Grinding weehl left side: Diameter: 500 mm Width: 80 mm Bore: 203 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm B axis swivelling range: +30 / -190 ° Grinding wheel speeds: up to: 1720 rpm Peripheral speed: 45 m/s Rotatable grinding spindle head (b-axis): 270 ° Work piece spindle head: speeds: stepless from: 5 rpm up to: 500 rpm rotatable: -10 / +100 ° taper in spindle: MT: 5 Tailstock: con regolazione micrometrica Taper in tailstock:: 4 MT Tailstock travel of barrel: 50 mm Feeds: X axis: 8 m/min Resolution: 0.1 µm Z axis: 16 m/min Resolution: 0.2 µm Max. table angular di ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 305 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 490 mm Spindle speeds: number (steps): 18 from: 38 rpm up to: 1510 rpm Taper in spindle: 40 ISO Feeds steps:: 18 longitudinal from: 12.0 mm/min up to: 1050 mm/min transversal from: 12.0 mm/min up to: 1050 mm/min vertical from: 6.0 mm/min up to: 525 mm/min Rapid traverse: longitudinal: 3.5 m/min transversal: 3.5 m/min vertical: 1.7 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 5.5 HP Total power required: 7.5 HP Machine´s weight about: 2100 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1800 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 305 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 490 mm Spindle speeds: number (steps): 18 from: 38 rpm up to: 1510 rpm Taper in spindle: 40 ISO Feeds steps:: 18 longitudinal from: 12.0 mm/min up to: 1050 mm/min transversal from: 12.0 mm/min up to: 1050 mm/min vertical from: 6.0 mm/min up to: 525 mm/min Rapid traverse: longitudinal: 3.5 m/min transversal: 3.5 m/min vertical: 1.7 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 5.5 HP Total power required: 7.5 HP Machine´s weight about: 2100 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1700 mm Various accessories: Universal milling head Set of toolholders

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 305 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 490 mm Spindle speeds: number (steps): 18 from: 38 rpm up to: 1510 rpm Taper in spindle: 40 ISO Feeds steps:: 18 longitudinal from: 12.0 mm/min up to: 1050 mm/min transversal from: 12.0 mm/min up to: 1050 mm/min vertical from: 6.0 mm/min up to: 525 mm/min Rapid traverse: longitudinal: 3.5 m/min transversal: 3.5 m/min vertical: 1.7 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 5.5 HP Total power required: 7.5 HP Machine´s weight about: 2100 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1800 mm Various accessories: Coolant system Cam control Steady Set of collets Set of short cutter arbors Se ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 600 to Total stroke: 0 - 305 mm Table surface: Length: 3070 mm Width: 1530 mm Distance from table to max: 950 mm Passage between supports: Lateral: 1220 mm Slide clamping surface: Width: 3070 mm depth: 1530 mm Close traverse speeds: Rapid traverse: 296 mm/s Press stroke: 10 mm/s Return traverse speeds: 380 mm/s Motor power: 150 kW Overall dimensions machine: Length: 4250 mm Width: 2100 mm Height: (5700+900) mm

RECON Part Number: 305781B Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Technical data Max. work-piece height: 80 mm Number of grinding heads: 2 Arrangement: horizontal Work-piece driving plate: Grinding wheel: outside diameter: 300 mm inside diameter: 233 mm Width / height: 50 mm Grinding wheel speeds: from: 1530 rpm up to: 24 m/s Work-piece advance: Speed of the work-piece driving plate:: 29.6 - 192 mm/s Voltage: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3050 mm Width: 1400 mm Height: 1600 mm Various accessories: Measuring instrument: PRETEC Workpiece loader

Technical data Number of spindles: 6 Capacity round bar: 13 mm Max. advance of bar: 63 (125) mm Max. stroke of long slide: 50/31.5 mm Machining rate: from: 0.24 sec up to: 75 sec Spindle speeds: number (steps): 47 from: 560 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 3055 (5161) mm Width: 930 mm Height: 2500 mm Various accessories: Bar feeder Set of toolholders Chip conveyor

Key data: 900 _Unknown / Other, 4000 Rexroth VAM 10, 500

Grinding diameter: 900 mm Grinding length: 4000 mm Workpiece weight: 500 kg CNC Brand: _Unknown / Other CNC Model: Rexroth VAM 10 Centre height:           500mm Grinding Ø:              900mm Grinding length:         4.000mm Grinding stone dimensions:1000 x 305 x 150 mm Grinding stone speeds:   640Rpm Table inclasement:       6° Length:                  12.000 mm  Width:                   3.500 mm  Height:                  2.500 mm  Weight:                  29.000 kg 

Sheet thickness: 6,00 mm void: 0 Table length: 3000 mm Table width: 3000 mm Knife length: 3000 mm MACH-id    5325 MAKE        HACO TYPE          TS 306 YOP            80 er SPECIFICATIONS Guillotine / Lazer / Cutting table        Guillotine Cutting lenght         3050 mm Maximum sheet thickness      6 mm Backgauge stroke X in mm        0 - 1000 mm DIMENSIONS Length       3600 mm Width         2100 mm Height        2000 mm

Sheet thickness: 12,00 mm void: 0 Table length: 3050 mm Table width: 0 mm Knife length: 0 mm MACH-id   3984 MAKE    Amada Promecam TYPE      GX 1230 YEAR     1999 SPECIFICATIONS Guillotine / Lazer / Cutting table    Guillotine Cutting lenght    3050 mm Maximum sheet thickness   12 mm Backgauge stroke X in mm    1000 mm DIMENSIONS Length    3850 mm Width     2380 mm Height      2040 mm  

Plate length: 6500 mm Plate width: 2250 mm Plate thickness: 305 mm Number of T-slots: 9   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id   3553 MAKE  STOLLE Germany TYPE  SDT YEAR   2010 SPECIFICATIONS Length   6500 mm Width    2250 mm Height   305 mm T -slot size   9 x  No. Of T-slots   T 28 Distance from T to T-slot / Jump   220 mm Weight a plate approx.  11700 Ton Number off matching pieces   2   

Sheet thickness: 13,00 mm void: 3050 Table length: 0 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIONS Controll   SC 70 Robosoft Guillotine / Lazer / Cutting table   Hydraulic Guillotine Cutting lenght    3050 mm Maximum sheet thickness  13 mm Backgauge stroke X in mm   0 - 1000 mm DIMENSIONS Length  4300 mm Width   2200 mm Height  2500 mm

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4   SPECIFICATIONS Controll  Conventionel   Hydraulic / Mechanical Hydraulic   3 or 4 roll   4 roll Maximum sheet thickness   40 mm Bending length   3500 mm Max. Rolling capacity Ø 2.500   40 mm Max. Prebending capacity Ø 2.500  35 mm Top Roll Ø  500 mm Bottom Roll Ø400 mm Side Rolls Ø  400 mm Power  55 kW

Sheet thickness: 140,00 mm Bending length: 3050 mm Number of rolls: 3   SPECIFICATIONS Controll   Conventionel Hydraulic / Mechanical   Hydraulic 3 or 4 roll3 roller Maximum sheet thickness   140 mm Bending length   3050 mm Max. Rolling capacity Ø 2.500   140 mm Max. Prebending capacity Ø 2.500   90 mm Top Roll Ø  900 mm Side Rolls Ø 820 mm Power  162 kW  

Table length: 1065 mm Table width: 230 mm Longitudinal X: 760 mm Cross Y: 305 mm Vertical Z: 405 mm SPECIFICATIONS X - Travel  760 mm Y - Travel  305 mm Z - Travel  405 mm bed / plano / portal / moving column Uniniversal milling Controll  Conventionel with Positip 850 Table Length x Width  1065 x 230 mm Table load in kG  200 Kg Spindle Taper  R8 with collet Spindle speeds / ranges  4600 Rpm  

Tapping capacity: 60 mm Drilling capacity: 0 mm Throat: 0 mm Tapping depth: 0 mm Tapping up to M 6 Table 1650 x 605 + extra tilting 305 x 605 Inclinable 0 - 90 Gr . Workingh area 0 - 1500 mm  

Drilling capacity: 40 mm Throat: 870 mm Spindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

Sheet thickness: 40,00 mm Bending length: 3050 mm Number of rolls: 4   Make Haeusler 40 mm Type VRM HY Year 1980 4 roll plate bender hydraulic 2 rolls driven Sheet thickness (mm)Bend = 40 mm Bending length (mm)Pre = 25 mm Number of rolls Length = 3.050 Top roll = 485 mm Conical bending 55 kW / 40 Ton

sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 120,00 mm Bending length: 3050 mm Number of rolls: 4   Make Faccin 120 mm Type 4 HEL 3186 Year 2011 Faccin 4 hel 3186 120 mm blechwalze platebender Sheet thickness (mm)T = 120 mm Bending length (mm)L = 3.050 mm Number of rolls 4 rollerTop roll = 860 mm Power = 225 Ps Weight = 160.000 Kg NC Siemens Simatec Top support Side support Conical bending New Euro 1.200.000  

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CTP-Mitsubishi - DPX 460 – Plate platesetter with Rip-Mate PC Year of construction: ca. 2007 incl. software and accessories incl. originally packaged role films For the production of ready-to-print stamped polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x stock rolls 1x integrated register punch for PM52 autoplate

saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic welding machine - Total power: 1.5 kW - Machine weight: 20.5 kg - Space requirement (W x D x H): 0.765 x 0.305 x 0.155 m Details Heating carrier opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld width 3 mm

Capper AROL – STELVIN • Year: 2006 • Speed: 9.000 bph • Direction: Counterclockwise • 6 heads • Screw cap - stelvin 30x60 • Safety protections.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Universal cylindrical grinding machine make WMW Karl-Marx-Stadt type SU 315 x 1500Machine -No: 8486Technical specifications:Largest swing diameter: 315 mmLargest grinding length: 1500 mmLargest workpiece mass: 300 kgLargest diameter grinding wheel: 630 mmlargest width: 200 mmBore: 305 mmGrinding spindle speed at V = 35 m / s. : 1060/1200/1400 rpm. at V = 50 m / sec: 1500 rpm.Connected load: 12.6 kWWeight approx: 5.8 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dryer make CETEMA type HG 290Machine -No: 305020/1 Year 1989Container capacity: 290 lContainer inner diameter: 1030 mmDimensions L x W x H: 2000 x 1300 x 1500 mmWith- Separator device- Dosing device- Timer- mounted control and switch cabinet- only 5600 operating hoursused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mot. Single disc grinding machine make SKINTOOLFabr. -No: 048031 Year 1999Disc size: 305 mmTable size: 334 x 240 mmTilting of the table: 0 - 45 °Max. Grinding height: 180 mmSpeed: 2850/1420 rpm.Drive power: 1.12 kWPower connection: 380 V / 50 HzWeight approx: 26.5 kgOutside dimensions approx: 570 x 440 x 465 mmWith- miter stop- tiltable table- several grinding wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical machining center make KIRA type VTC 30Machine -No: 31028 Year 1989traverseX: 430 mmY: 250 mmZ: 300 mmSize work table: 500 x 305 mmTable load capacity: 200 kgRapid traverse: 20 m / minTool magazine - memory locations: 10Max. Tool weight: 3 kgMax. Tool length: 200 mmTool change time: 2 sec.Max. Drilling capacity: 18 mmTapping performance: M 14Milling capacity: 15 cm³ / minSpeed range (stepless): 120 - 8000 rpm.Tool holder: SK 30Drive power: 3.7 kWWeight machine: 1.8 tExternal dimensions machine: 1250 x 2100 x 2300 mmWith:- CNC path control Fanuc Series 0-Mate M- 10-fold tool changer- Several tool holdersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

cutting range for steel to: 25,0 Trennschnitt mm cutting range for steel to: 20,0 Qualitätsschnitt mm capacity at 100%: 25,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,9 KW voltage: 230 V range L-W-H: 505 x 147 x 305 mm weight: 8,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The AVALON 40.1 PFC is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and ease of use Handling makes them the ideal candidate for trade, workshop and industry. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing ...

Type: S-30 Sealing length: 305 mm Vacuum pump: 10 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 0.6 kW Machine dimension in cm: Width: 40 Lenght: 32 Height: 36 Delivery time: after advanced payment, 1 working day

Screw conveyor,stainless steel,o-profile,1,1 kW gear motor,Ø 130 x L 3050 mm screw.

Stock number: 3702 BELT SAND GRINDING MACHINE Manufacturer: SCANTOOL, Type: 50-2000 Machine NO.: 3054 Specifications: Sanding belt size 50-2000 mm

Y1 + Y2 + X + V (Hydraulic crowning in table) Capacity: 80 ton Backgauge: CNC Control: CNC Safan Passage between uprights: 2050 mm Max stroke: 140 mm Max distance between table -- ram: 430 mm Depth of throat: 400 mm Table width: 55 mm Locking speed: 65 mm/sec Working speed: 9 mm/sec Returning speed: 57 mm/sec Electric motor (power): 5,5 kW Length: 3050 mm Depth: 1550 mm Height: 2450 mm Weight: 5,8 ton

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

saw band length: 4400 x 34 x 1,1 mm band speed: 15 - 150 m/min capacity 90 degrees: square: 500 x 335 mm capacity 90 degrees: round: 335 mm : 330 mm : 320 x 335 mm : 305 mm : 305 x 335 mm : 180 mm : 170 x 335 mm work height max.: 750 mm Motor Capacity: 3 kW machine weight ab.: 1320 kg dimensions: 1450 x 2350 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length ... 3050mm max. šWorkpiece width ... 1525mm sheet thickness ... 19mm Laser power... 2500W Axis Z ... 300mm Axis A ... 360° Axis B ... 1.5M Axis C ... 360° Control Mazatrol L x W x H ... 9800x5000x2300mm Machine weight ... 14500kg The machine is in good condition, possible to test under power.

Wolff Apparatebau KG blanching and cooling line consisting of: Van Wees mobile elevating belt: s/s frame, plastic belt with dividers, belt width: 175 mm, distance between dividers: 165 mm, divider height: 50 mm, elevating height: 2930 mm, total dimensions: 3300 mm x 1100 mm x 3000 mm, Wolff Apparatebau KG blanching machine, type: B950/3000, machine number: 93-962, year of construction: 1993, 380 V, 50 Hz, 6.5 kW, dimensions: 4650 mm x 1550 mm x 3050 mm Wolff Apparatebau KG cooling drum, type: TRK950/3000, machine number: 93-963, year of construction: 1993, 380 V, 50 Hz, 10 kW, dimensions: 4650 mm x 1500 mm x 2400 mm s/s filter tub with circulation pump, inside dimensions: 1000 mm x 1000 mm x 950 mm, dimensions filter tub: 1400 mm x 1000 mm x 1130 mm, s/s platform, dimensions: 4100 mm x 1800 mm x 1980 mm, 3000 mm x 1100 mm x 1980 mm, 2900 mm x 1800 mm x 1980 mm, s/s switch ca ...

2 pieces low-stroke order picker, Linde N20, with long forks - used - : Price per piece ex location: Device No. 7: 3.500.-€ (net) Device No. 5: 3.500.-€ (net) Manufacturer: Linde Type: N20 Fork length: approx. 2.34m (for two pallets in a row) Width forks: approx. 50cm Total length: approx. 2,80m Device width: approx. 73cm Nominal load capacity: 2.000kg Empty weight: approx. 530kg, or 630kg, Battery voltage: 24V 3kW Battery weight: between 305 and 365kg, or 400kg All devices incl. charger Device No. 7 W4X132B00597 Year of construction: 2011 Operating hours: approx. 5,400 Service due Condition: very good Available: from now on D-64859 Eppertshausen

Used 5-axis bridge-type machining center ROEDERS PXP601DSH (A3750) Condition: USED YEAR 2014 X-AXIS TRAVEL 540 mm Y-AXIS TRAVEL 635 mm Z-AXIS TRAVEL 400 mm DISTANCE SPINDLE NOSE-TABLE 50-555 mm RAPID FEEDS X-Y-Z 60 m/min SPINDLE 42000 rpm; 14 kW; HSK E40 A-AXIS ± 115 ° TABLE SIZE 340 x 340 mm MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 96 POS MAX TOOL DIAMETER 16 mm CONTROL UNIT ROEDERS RMS6X.xx4 WEIGHT 10000 Kg OVERALL DIMENSIONS 2885 x 2760 x 3050 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; EXHAUST SYSTEM NOTE AXES WITH LINEAR MOTOR

pressure: 300 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 500 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,0 mm/sec work stroke: 320 mm dayligth: 590 mm table height: 905 mm oil volume: 400 ltr. voltage: 400 Volt working pressure: 283 bar Number of working hours: ~ 21.835 h total power requirement: 23,0 kW weight: 18.250 kg Dimensions (HxWxD): 4550 x 2250 x 3050 mm current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) 2D graphic touch screen programming mode 17 high-resolution color TFT Complete Windows application suite Delem Modusys compatibility (module  ...

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...