roland 204 used for sale

Load stand, swivel stand, lifting stand, shackle, heavy-duty shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread, lashing point -Manufacturer: VEB MWR, shackle heavy-duty shackle -Type: 5 TGL 20440 Form A -Tensile force: 50 kN -Number: 15 shackles available -Price: per piece -Dimensions: 200/140/H75 mm -Weight: 4 kg/pc.

Shackle, load block, swivel block, lifting block, shackle, heavy-duty shackle, load jack, lashing eye, lashing ring, anchor point, load block thread, lashing point -Manufacturer: VEB MWR, shackle heavy-duty shackle -Type: 5 TGL 20440 Form A -Tensile force: 100 kN -Number: 4 shackles available -Price: per piece -Dimensions: 270/190/H95 mm -Weight: 10.1 kg/pc.

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Milling fence adjustment: via handwheel; Milling stop Gauge: Siko meter; Milling jaw adjustment: handwheel; Milling jaw gauge: Siko counter;

This 3-axis Quaser MV-204 CP vertical machining centre was manufactured in 2007. It features a working area with X-axis travel of 1200 mm, Y-axis travel of 700 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking to get high-quality milling capabilities, consider the Quaser MV-204 CP machine we have for sale. Contact us for further details.

sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

: neu : 2023 : 8286 : prompt, Zwischenverkauf v : Türkei : 2990 € : 1 : 2040 mm : 0.8 mm : 70 ° : 2400 mm : 750 mm : 850 mm : 290 kg straight upper tool moveable manual cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 € : 1413.72 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg STANDARD EQUIPTMENT: servomotorized spindle drive 4 axes (Y1, Y2, X and R) Color graphics controlDELEM DA-66S - 17 ", Touchscreen - 3D imaging in simulation and production - Suitable for personal Windows applications - Compatible with DelemModusys - USB and peripheral interface - Skill-specific application treatment - Sensor, bending and correction interface servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guid ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42600 € : 813.66 € : 2035 mm : 4.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0011 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0012 : 292 € : 1 : 835 mm : 80 mm : 12 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 118930 € : 2247.78 € : 1200 mm : 730 mm : 1.200 x 500 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle  ...

Auction-ID: A7-47287-210

Working, almost never used Auction-ID: A1-41999-102

Roland TECHSOFT MDX-40A 3D milling machine (with USB dongle) similar to the Roland MDX40A The Roland MDX-40A is a milling machine with SRP technology that allows you to quickly prototype by subtractive method, i.e. by machining materials until a finished product rich in detail and with perfect surface finishes. Auction-ID: A1-47049-94

The versatility and productivity of the LEF-200 allows you to work in many areas of visual communication, from object personalization and advertising branding to prototyping and signage. Auction-ID: A1-47049-93

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Clamping Plate, Clamping Table, T-Slot Grid Plate PAGUS Working Area: 384 x 204 mm Working Height: 64 mm Groove Width: 14 / 24 mm used ! Dimensions: 384 x 204 x 64 mm

Clamping Plate, Clamping Table, T-Slot Grid Plate PAGUS Working Area: 204 x 192 mm Working Height: 64 mm Groove Width: 14 / 24 mm used, tested ! Dimensions: 240 x 205 x 64 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 385 x 204 mm Working height: 65 mm groove width: 14 / 24 mm used, tested ! with clamping elements ! Dimensions: 480 x 205 x 230 mm

Clamping Bracket, Angle Table PAGUS Clamping Surface1: 204 x 168 mm Clamping Surface2: 213 x 168 mm used, tested ! with clamping elements ! Dimensions: 280 x 170 x 270 mm

guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

PROMECAM STPC 204 hydraulic press brake • Force: 200 T (2040 kN) • Bending length: 4100 mm • Passage between uprights: 3500 mm • Gooseneck: 400 mm • Stroke: 220 mm • Motor power: 17 kW • Delem DA-65W retrofit numerical control with 2D color graphics • 7 axes: Y1, Y2, X, R1, R2, Z1, Z2 • 2 front consoles on linear guides • New tooling line (punches + dies) • Power supply: 380 V / 50 Hz • Dimensions (mm): 4495 × 1885 × 3250 • Weight (kg): 14,200 • Condition: used, excellent visual condition• Year: 1987 Auction-ID: A1-47421-8

Volkswagen Transporter Kombi 2.0 Diesel 139,600 km, demonstrable with CARPASS Automatic gearbox EURO 6, vehicle allowed in any low emission zone 1st Owner Ex Government Up to 9 seats possible included in the price! Air conditioning Front and rear parking sensors Towbar Radio/CD/Bluetooth/USB/AUX Hands-free calling Power windows Electrically adjustable exterior mirrors Sliding door Auction-ID: A3-44487-5025

Equipped with: YaAZ-M204G engine (approx. 110 hp / 81 kW), 3 ammeters of 100 A, 380/220 V Soviet installation, about 50 kW continuous power (±62 kVA), engine running, generator does not give power, fault unknown, YaAZ-M204G two-stroke diesel engine, no batteries available, Auction-ID: A1-40142-59

Equipped with: Spijkstaal Electro B.V. electric commercial vehicle type 2040 from 2003 with chassis number 03720E144, own weight without battery 950 kg, battery weight 300–750 kg, payload 2,000 kg, pulling force on hook 2500 N for 5 minutes and 1300 N for 60 minutes, operating on 36 volt battery voltage and currently 5,012 operating hours. Auction-ID: A1-42021-8

PROMECAM STPC 204 hydraulic press brake • Force: 200 T (2040 kN) • Bending length: 4100 mm • Passage between uprights: 3500 mm • Gooseneck: 400 mm • Stroke: 220 mm • Motor power: 17 kW • Delem DA-65W retrofit numerical control with 2D color graphics • 7 axes: Y1, Y2, X, R1, R2, Z1, Z2 • 2 front consoles on linear guides • New tooling line (punches + dies) • Power supply: 380 V / 50 Hz • Dimensions (mm): 4495 × 1885 × 3250 • Weight (kg): 14,200 • Condition: used, excellent visual condition• Year: 1987