roland 200 used for sale

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Sanded surfaces, ground flat. Hole diameter: 28mm, holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-46642-78

Technical data Manufacturer: ARBURG Model: ALLROUNDER 1200 T 800 - 100 Serial Number: 209339 Year of manufacture: 01/2009 Operating voltage: 400 V / 3~ / 50 Hz Control voltage: 230 V / 50 Hz Control voltage (2): 24 V Rated current motor/heater: 60 / 11 A Total rated current: 71 A Total connection: 37 kW Country of manufacture: Germany Configuration Hydraulic injection moulding machine of the ALLROUNDER series Machine size: 1200 T Version: 800 - 100 Auction-ID: A1-46503-322

On transport trolleys Auction-ID: A1-46666-504

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-46642-88

Technical data Machine Type: Press Manufacturer: TOX PRESSOTECHNIK GmbH & Co. KG Press Type: MAG 030.226.A.001 Serial Number: 315604 Drive: TOX Powerhouse S 30.113.140.12D-LF Pneumatic connection: G 3/4\" Electrical connection: 230 VAC Maximum pressing force: 170 kN (6 bar), 300 kN (10 bar) Minimum air pressure: 3 bar Maximum air pressure: 10 bar Stroke: 140 mm (total), 12 mm (power stroke) Ambient temperature: 10°C to 60°C Weight: approx. 1150 kg Year of Make: 2007 Configuration Control: STE 325-130-3/4 Compressed air: filtered and dried (max. 40 μm) Note: Powerhouse should be renewed Auction-ID: A1-46503-324

Model: Caterpillar D6K Type: Tracked dozer Operating weight: 12,611 kg Engine: CAT C6.6 ACERT, 6-cyl turbo diesel Engine power: 93.2 kW Hours: 7,862 h Year: 2008 Blade type: PAT (Power Angle Tilt) Blade capacity: approx. 3.0 m³ Blade width: approx. 3.25 m Transmission: hydrostatic, variable speed Undercarriage: standard track, 560 mm shoes Cabin: ROPS/FOPS, air-conditioned, ergonomic controls Included equipment: PAT blade, lighting kit, heating, drawbar Compliance: CE Power supply: Diesel Manufacturer: Caterpillar Inc., Peoria, Illinois, USA (France plant) Approx. own mass: 12.6 t Durable mid-size dozer ideal for grading, backfilling and general earthmoving applications. Auction-ID: A7-45990-7

Volume about 12m3 (14tons) Hydraulic brakes Additional work lights 2 vertical beaters (visible at the rear) Scatter discs at the bottom (you can see them under the rollers) ➡️ This is a vertical manure spreader with discs → gives a wider and more even spreading pattern than old types Chain bottom (floor chain) → pushes manure backwards Hydraulic control (hoses visible) PTO drive (PTO for spreaders) Certificate of conformity available to register! Auction-ID: A3-43529-13006

Machine type: Crawler excavator Manufacturer: Liebherr Model: R924B HDSL Litronic Year/Manufacturer: 2007, Liebherr France S.A.S. Serial number: WLHZ0761EZC020270 Operating hours: approx. 13,325 h Technical data: Engine power: 127 kW Max. travel speed: 5.2 km/h Engine: Liebherr diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Visible signs of wear, scratches and paint damage Remarks: - Solid 24-ton class excavator - Suitable for earthmoving and general construction works Own mass: approx. 24,000 kg Auction-ID: A7-45990-45

Polishing Machine Motor power 750 watts Diameter of the polishing wheels 200 mm. Axial dimension 16 mm. Speed 2950 rpm. Condition: never used / new (5) Auction-ID: A7-46642-249

Technical details Type: Automatic film laminator (B1 format) Temperature control: Advanced system (overheating protection) Pressure: Adjustable Max sheet size: 760 × 1020 mm Paper range: 115–350 g/m² Speed: Up to 50 m/min Application: Film lamination of printed sheets and paperboard Serial number: 031 Auction-ID: A7-46679-19

CNC Control: MAZAK & FANUC L-64 Cutting table: spiked Cutting head: CO₂ laser Suction system: KEMPER with external unit Indicated voltage: 40000 V X-Y-Z axis strokes: 3335 x 1545 x 420 mm A-axis: ±360° B-axis: ±135° Maximum part dimensions: 3050 x 1525 x 22 mm Load capacity: 7.9 kN / 810 kgf Laser power: 4000 W Laser Model: YB-L400A8M Weight: 14600 kg Status: Complete machine with suction unit and accessories Additional information: Sold with an additional laser unit and many spare parts Additional information: Disassembly and loading at the expense of the buyer Auction-ID: A1-46647-4

Machine type: Tandem vibratory roller Manufacturer: HAMM (Wirtgen Group) Model: HD 10C VV Year/Manufacturer: 2006, HAMM AG – Germany Serial number: H1700209 (visible) Operating hours: n/a Engine: HATZ diesel engine Engine type: 1D / 1-cylinder diesel (visible plate) Power: 16 kW Weights: Operating weight: 1,575 kg Empty weight: 1,450 kg Max weight: 1,650 kg Axle load: Front: 800 kg Rear: 900 kg Equipment: - Double drum (tandem) vibration - Open operator station (ROPS frame) - Mechanical drive Condition: - Used condition - Visible wear, scratches and corrosion Remarks: - Compact roller for asphalt and soil compaction - Suitable for small construction sites and finishing works Own mass: approx. 1,575 kg Auction-ID: A7-45990-53

Max load capacity 500 kg., with control Auction-ID: A1-46666-566

Machine type: Tandem roller Manufacturer: JCB Vibromax Model: VMT 390 Year of manufacture: 2008 Serial number: JCB 1701312 Technical data: Operating weight: 3,900 kg Engine power: 34.3 kW Engine: Kubota diesel engine (label visible) Equipment: - Twin smooth drums (front & rear) - Open operator station with ROPS frame - Hydrostatic drive Condition: - Used condition - Visible wear and surface rust on drums - Scratches and paint damage on body Remarks: - Compact tandem roller suitable for asphalt and soil compaction - Reliable Kubota engine Own mass: approx. 3,900 kg Auction-ID: A7-45990-43

Welding table on lift table: Hole diameter: 28mm The table is made of 15mm thick steel S355 The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mm Ribbed underside for reinforcement. Table length 2000 mm Table width 1000 mm Load capacity 2000 kg Lifting height max. 1525 mm Total connected load 1.5 kW Connection voltage 400 V Condition: never used / new (5) Auction-ID: A7-46642-2

Defect, sold as a spare parts carrier Auction-ID: A1-46666-423

Notching machine - Footswitch - Emergency stop Sheet thickness 6 mm Pressure 18 t Blade length 220 mm Angle adjustable from - to 90 degrees Table surface 1100 x 950 mm Bending length 835 mm Machine weight approx. 1.1 t Dimensions L x W x H 1.2 x 0.8 x 1.4 m Auction-ID: A7-46642-22

Auction-ID: A1-46503-349

Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-46642-95

Belt width 75 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.1 HP Machine weight approx. 75 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-46642-230

Machine type: Wheel loader Manufacturer: Komatsu Model: WA380-6 Serial number: H60372 Product identification number (PIN): KMTWA095E79H60372 Year of manufacture: 2007 Operating hours: 15,441.4 h Operating mass: 19,450 kg Engine power: 140 kW Cab: Enclosed operator cab (ROPS) ROPS: Yes Bucket: Front loading bucket Tyres: Pneumatic tyres, heavy-duty profile Color: Yellow Remarks: - Machine identification plate available and readable - ROPS plate present - Signs of wea - Bucket shows operational wear - Hour meter readable Own weight: approx. 19,500 kg Auction-ID: A7-45990-5

Belt width 150 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.8 HP Machine weight approx. 100 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Auction-ID: A7-46642-201

Type 93576085, Incl. twin hose and pressure reducing valve Auction-ID: A1-46666-537

Description Machine type: Trailer-mounted concrete pump Manufacturer / Brand: CIFA Model / Type: v Year of manufacture: 2003 Country of manufacture: Italy Serial number: 00278 Performance Max. theoretical output: 30 m³/h Max. oil pressure: 220 bar Max. CLS pressure: 70 bar Engine Engine manufacturer: Deutz Engine model: F4L 1011 F Engine power: 38 kW (50.9 HP) Engine speed: 2400 rpm Displacement: 2.732 l Engine serial number: 00798493 Weights Max. weight: 2,470 kg Configuration & Features - Trailer-mounted concrete pump - Integrated hopper with safety grid - Control panel with pressure gauges and switches - Stabilizing support legs - Towable chassis with road wheels Condition / Remarks Used concrete pump in working condition. Normal wear consistent with age and use. Auction-ID: A7-45990-24

Dismantled, ready for loading. Radius approx. 3,500 mm, with Demag electric chain hoist, max. load capacity 500 kg. Auction-ID: A1-46666-485

Machine is equipped with: - chip conveyor - renishaw probe system Auction-ID: A1-45752-12

MIG/MAG welding machine with: Hose package Ground cable Set of welding nozzles Welding current max. 200 A Open circuit voltage 14 - 24 V Connection voltage 230 V Weight 25 kg Dimensions LxWxH 500 x 200 x 300 mm Welding wire not included Condition: never used / new (5) Auction-ID: A7-46642-109

Fendt 936 Vario in very good overall condition. Reliable and high-performance tractor with less than 10,000 hours. Ideal for demanding agricultural work, offering power, comfort and efficiency. Very well equipped, especially with: Front suspension Cab suspension Profi version cab Air brakes Load Sensing (LS) hydraulic system LS hydraulic spool valves Tractor ready to work. Auction-ID: A3-43529-36028

Machine type: Wheel loader Manufacturer: DAEWOO Model: MG400-III Year of manufacture: 2000 Serial number: 1238 Power: 101 kW Operating weight: 21,900 kg Equipment: - Front bucket - Enclosed operator cabin - Articulated steering - Large off-road tires Condition: - Used condition - Visible wear and corrosion on bucket and body - Tires used but serviceable - NOT functional Remarks: - Robust machine suitable for earthmoving and loading operations - Inspection recommended prior to use Own mass: approx. 21,900 kg Auction-ID: A7-45990-30

Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4

TIG welding machine, delivery incl. - Grounding terminal 300 A with 1.5 meter welding cable - Electrode holder of Italian design 200 A with 2 meter welding cable - Carrying strap Welding current 10 - 200 A Connection voltage 230 V Weight 16 kg Dimensions LxWxH 600 x 300 x 400 mm Condition: never used / new (5) Auction-ID: A7-46642-212

Lifting height: 850mm; Includes: 20 matching dollies with a capacity of 150 kg, dimensions: 600x400x160mm Item number: Z201357; including 20 stackable plastic baskets. Size: 445x380mm Auction-ID: A1-46698-310

Product: SHIM-ST-DIN 988-40,2X70X3,0 WÜRTH PN: 991308366 according to DIN 988, Auction-ID: A1-46694-412

Machine type: Crawler excavator Manufacturer: Volvo Construction Equipment Model: EC210CL Year of manufacture: 2007 Serial number: VCEE210CJ00110668 Operating hours: approx. 8,967 h Technical data: Operating weight: approx. 22,960 kg Engine power: 110 kW Engine: Volvo diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Signs of wear and scratches - Engine visually complete Remarks: - Popular 20-ton class excavator - Suitable for general construction and earthmoving Own mass: approx. 22,960 kg Auction-ID: A7-45990-44

Good condition Auction-ID: A7-46327-91

Technical details Model: SHH 800AG Type: Folder gluer machine Configuration: - Straight line cartons - Double wall cartons - Lock-bottom cartons Glue system: Left and right glue pots Adjustment: Vertical movement Output: Counter and kicker system Additional equipment: Milling device Serial number: 071003 Auction-ID: A7-46679-9

Lifting height: 850mm; Includes: 20 matching dollies with a capacity of 150 kg, dimensions: 600x400x160mm Item number: Z201357; including 20 stackable plastic baskets. Size: 445x380mm Auction-ID: A1-46698-18

Series No.: 09030301, on transport rack, incl. container with centrifugal pump Auction-ID: A1-46666-418

Machine type: Telescopic handler Manufacturer: CLAAS (by Caterpillar) Model: TARGO K50 / CAT 512 Year of manufacture: 2002 Serial number: 51200549 Technical data: Engine power: 91 kW Unladen weight: 7,360 kg Rated capacity: 4,000 kg Permissible total weight: 8,500 kg Axle load front: 4,000 kg Axle load rear: 4,700 kg Equipment: - Telescopic boom - Fork carriage with pallet forks - Enclosed operator cab - All-terrain tires - Hydraulic quick coupler - Lighting system Condition: - Used condition - Visible corrosion and paint wear on boom and chassis - Fork attachment with rust - Cabin in used but complete condition - Hour meter reading: approx. 5,712 h - Important: Reverse drive not-working Remarks: - Robust agricultural/industrial telehandler - Suitable for loading and material handling - Manufactured for CLAAS by Caterpillar (UK)  ...

Machine type: Wheeled Excavator Manufacturer / Brand: HANSA Maschinenbau Model / Type: APZ 531 Year of manufacture: 2003 Serial number: W095012053SH18113 Engine type: Deutz Diesel Engine Engine power: 76 kW (103 HP) Fuel type: Diesel Drive type: 4x4 wheeled drive Steering: Articulated steering with hydraulic assist Operating weight: approx. 5,200 kg Total permissible weight: 7,200 kg Axle load front / rear: 2,600 kg / 2,600 kg Attachment: Hydraulic rotating clamshell bucket (grab type) Hydraulic system: High-flow hydraulics with multiple auxiliary circuits Outriggers: 4 hydraulic stabilizers for maximum working stability Cabin: Enclosed cabin with full glass, ergonomic seat, and complete controls Control system: Joystick hydraulic control Hours on display: 13,802 h Condition / Remarks: HANSA APZ 531 compact wheeled excavator in operational co ...

Technical details Manufacturer: Heidelberg Model: SBDZ Type: Cylinder die-cutting machine with hot foil system Max sheet size: 640 × 900 mm Min sheet size: 110 × 290 mm Hot foil system: Cavomit (installed 2005) Control: Servo-controlled system Application: Die cutting, creasing, and hot foil stamping of paperboard and printed materials YOM: 1972 / Refurbished: 2005 Auction-ID: A7-46679-1

Without a trailer, only the tractor BE Tractor 10 tons First Owner Double cab Air conditioning Beacons Air suspension Multi towbar with connection for air brakes Auction-ID: A1-41946-30

FMB 4500x800x1420, hours may vary Auction-ID: A1-46503-2

TIG Welding Machine AC/DC, pulse Demonstration device in aluminium box Delivery incl. complete equipment See pictures Technical data: Welding current 10 - 200 A Connection voltage 230 V Weight 6.5 kg Dimensions LxWxH 380 x 120 x 250 mm Auction-ID: A7-46642-141

Includes: transport box 1230x810x1030mm, various accessories. Auction-ID: A1-45979-68

Inverter with digital display and IGBT technology Welding current 30 - 200 A Connection voltage 230 V Weight 3.6 kg Dimensions 290 x 135 x 260 mm Condition: never used / new (5) Auction-ID: A7-46642-142

Machine type: Telescopic handler Manufacturer: Manitou Model: MLT 627 T Monolift Serial number: 251706 Chassis number: 1251706 Technical data: - Rated power: 74.5 kW - Unladen weight: approx. 5,935 kg - Maximum tractive effort: approx. 5790 daN - Maximum train weight: approx. 24915 daN - Vertical max. effort (trailer hook): approx. 1500 daN - Tyre pressure: Front 2.75 bar / Rear 2.75 bar - Fork attachment included Year of manufacture: 2008 Condition: - Used condition - Visible wear and scratches on body and boom - Fork carriage shows typical usage wear Remarks: - CE marked - Cabin machine - Suitable for agricultural and construction handling tasks Own mass: approx. 5,935 kg Auction-ID: A7-45990-21

- Spoons also included - Winch included (as good as new - little used) - Winch is 2000KG lifting capacity Auction-ID: A3-43529-16552

Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-46642-207

Machine type: Wheeled excavator Manufacturer: Liebherr Model: A316 Litronic Year/Manufacturer: 2009, Liebherr-Hydraulikbagger GmbH Serial number: WLHZ1041VZK046519 Operating hours: approx. 8,145 h (reading from display) Technical data: Engine power: 94 kW Max. travel speed: 20 km/h Permissible total weight: 21,000 kg Engine: Deutz diesel engine (approx. 95 kW / 127 HP) Equipment: - Mono boom - Standard dipper arm - Digging bucket - Wheeled undercarriage (4x tyres) - Front blade - Outriggers - Enclosed operator cabin Condition: - Used condition - Visible wear, scratches and paint damage - Play in joints possible Remarks: - Compact wheeled excavator in 16 t class - Suitable for urban construction and utility works Own mass: approx. 16,000 kg Auction-ID: A7-45990-46