roland 200 used for sale

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 8.0 mm ST plate thickness: 5.0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60.0 l engine output: 4.0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foo ...

plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60.0 ltr. table:: 1000 x 800 mm total power requirement: 2.62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LASKA WWB 2OO FROZEN MEAT GRINDER

A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible.

x-travel: 2000 (775 + 600) mm y-travel: 620 mm z-travel: 520 mm Control: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1 power capacity - main spindel: 18 kW table surface area: 1.200 x 600 mm rotary table diameter: Ø 500 mm swivellable: +15/-95 ° rotatable: 0- 360 ° max. table load: 1000/350 kg tool taper: SK 40 number of toolpositions: 30 pos. internal coolant system feed: 20 bar rapid traverse ( X / Y / Z ): 30 m/min dimensions: 5,0x 2,5 x 3,3 m weight of the machine ca.: 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spi ...

Batch mixer for the production of chemical products, foodstuffs, building materials, plastics, animal feed, etc., max. usable volume: 2,000 l., parts in contact with the product made of stainless steel 1.4301 (AISI 304), mixing unit drive 30 kW (with external fan), equipped with 2 cutting rotors (18.5 kW each), 2 liquid lances for injection directly onto the cutting rotors and pneumatic spiral cleaning. Emptying via pneumatically operated bottom flap. The scope of supply also includes: control cabinet with frequency control for the mixing unit (0.25 to 2.8 m³/s circumferential speed), weighing frame with 4 load cells, 4 machine feet to raise the mixer body, jet-cleaned cartridge point filter with 4 m² filter area and 3 kW blower (ATEX, 2,580 m³/h air flow), silencer, water dosing and technical documentation. Available for an extra charge: Suitable frame for filling the mixer  ...

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

Mazatrol Matrix Control Max. turning diameter 530 mm Max. machining length 500 mm Max. bar passage 52 mm Travel X/Y/Z 450/200/550 mm Main spindle max. speed 5,000 rpm C-axis Milling spindle max. speed 12,000 rpm B-axis -30°-190°, 1° indexing Capto C6 Tool Holder Tool magazine with 72 tool positions Max. tool diameter 90 mm Max. tool diameter with free secondary positions 125 mm Max. tool length 210 mm Tailstock MK5 Automatic Parts Catcher (D:65 x L:120 x 2.5KG) Automatic Tooleye Conveyor Cooling by the spindle, 70 bar Coolant system with 70 bar high-pressure pump and paper belt filter Milling spindle synchronized threading Rapid traverse stylus angle of inclination during movement Cylinder (G07) + Polar Interpolation (G12.1) Signal lamp 1 pcs Irco Bar Feeder ILS-MUK-7012 -Max. rod length: 1,200 mm 1 pc oil mist extraction

FOR SALE TBG 632V12 engine power 2798 kwe year 2000 hours 47 000 alternator AC GENERATOR year 2012 power 3041 kva RPM 1000 HZ50 400 V full instalation overhaul at 40 000 hours

greates pass round over bed: 960 mm swing diameter over bed slide: o: 860 / u: 730 mm turning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 19 mm

Please ask for more details!

Model: Siemens SIMATIC ET 200M Manufacturer: Siemens Type: IM 153-1 + SM 322 + SM 321 Items: 6ES7 153-1AA03-0XB0 6ES7 322-1BL00-0AA0 6ES7 321-1BL00-0AA0 Voltage: DC 24V Weight: approx. 4.5 kg (complete assembly with all modules) Condition: used, tested, functional Price without VAT per piece Country of origin: Germany Pieces: 1 complete set (8 modules incl. carrier rail)

- Renishaw measuring probe MP-12 - IKZ 15 Bar - Interface set - Performabnce software package - Monitoring B prepared not included

- Multi-Tasking Machining in a Single Machine Setup - Sub spindle for overtaking with full C-Axis - The INTEGREX IV series can finish all machining processes. - High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. - Lower turret with rotary tool spindle so livew tooling - Chip conveyor with coolant and 15 Bar iKZ - Double chuck KNCS-N 210-53 SMW Autoblock - MAZAK Flex -GL150F Gantry Loader - Gripping range 200 x 120 length x 15 Kg

Height=1.67 m, Overall length= 3.65 m, Overall width= 0.96 m, Net weight= 365 kg,

SEYDELMANN AU 200 WITH LIFT

CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter

Sm 102-10P Autoplate All 3 washes Perfector 5x5 Cp 2000 only 84 mil Test Print is Possible

Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to  ...

Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005

Key data: 2000 mm, 6 mm

Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW

Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m

• For single and multiple containers • Straight infeed conveyor with stacking device • For PE film • Film width 30\endash 200 mm • Film thickness 20\endash 100 µm • Roll diameter max. 300 mm, core diameter 70/76 mm • Output max. 24 cycles/min, depending on format • PLC Eberle PLS 508 with Eprom • Enclosure with safety switches • Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.

Injection moulding machine Arburg 470C 2000-675 BJ 2007

Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets

gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included

different sets for an F 200 3 jaw chuck (base jaws on top jaws)

Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

sheet width: 2000 mm plate thickness: 3 mm rear stop: von Hand, 750 mm number of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm

Hoort bij Lijn -gt; P.14d 15917

Injection Molding Nose Demag ergotech 50/370-200 BJ 2000

Injection moulding machine Engel victory 200H/200V790 comb BJ 2018

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - / Contact us at -

Maxi Maestro D.C Servo Drive 200 x 25/50

Inv. Num. : 5982 Type: TURNTEC 83-200 Producer: VOJUS Created: 2003 Parameters: Control system: TURN tec. Maximum turning length: 1800 mm Maximum turning diameter over bed: 400 mm Maximum turning diameter over support: 350 mm Turning diameter: 600 mm Spindle diameter: 10 mm

We are selling this lathe. It can be tested when connected. Accessories included with the machine. Turning diameter: 2,000 mm Turning length: 10,000 mm Workpiece weight (max.): 60,000 kg Machining diameter: 2,000 mm

I am selling this machine. It can be tested when connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100. The machine comes with a support column, 6 plates, a rotating table E 20, heads, etc. This is a complete workstation.

spindle diameter: 200 mm Processing width on table: 6000 mm Processing height on table: 3150 mm Processing depth: 1985 mm Slide cross-section: 530 x 550 mm table load: 20 t Plate field size: 16800 x 5500 mm tool taper: SK 60 total power requirement: kW weight of the machine ca.: 173 t dimensions of the machine ca.: m - Additional equipment Angle head large and small - The OB no. is: 22979 - The table is the model S20 MP table Size: 2200 x 2500 mm - The processing width on the machine X -Way is 6000 mm - Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.

Compact bread roll line KÖNIG, type: GS 2000 For Kaiser rolls, long rolls, hot dog buns, normal round buns and flattened ones for hamburger buns. - Mini Rex 4000-S head machine - Weight range: 30 - 135 g - Knitting drums: SK58 and AK70 - Weight range: approx. 30 - 135 g - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good, well-maintained and technically tested by us - Ready for immediate use Visits and test runs are possible by arrangement.

Manufacturer: Ascojet Model: 2001RX Type: Dry Ice Blasting Machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Hours: 481 Condition: used Location: Bremen

A three-phase asynchronous motor Hoyer is available. Degree of protection: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. An on-site inspection is possible.

Ref. no.: 18092 Hersteller: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg

Control Mazatrol 640 MT Pro Max. Rotary Diameter 660 mm Max. turning length 1,045 mm Travel X1 axis: 580 mm X2 axis: 150 mm Y-axis: 160 mm Z1 axle: 1,045 mm Z2 axis: 1,010 mm W-axis: 1,050 mm B-axis: -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 40 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations Special equipment Conveyor Tooleye 15 bar high pressure pump Milling spindle synchronized threading 5-axis simultaneous machining Preparation for multiple and flash tool holders Interface for ...

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m