129,014 used machines on RESALE, but how to find them? Machine Search
Year: 2001 serial number: 0940/01 operating pressure: 8 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -
sheet width: 2000 mm sheet thickness - max.: 6 mm connected load: 7,5 kW : . with crowbar: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2000 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles : 4,109,156,293 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -
turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.
Schunk Universal Gripper PGNplus P 200/1-AS (318618) Size: 200, pneumatic with gripping force retention: AS • Hub per jaw: 25 mm • Clamping force: 5050 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 25.0 Clamping force [N] 5050.0 Clamping force (at finger length 0 mm) [N] 5200.0 Min. spring force [N] 1250.0 Net mass [kg] 6.8 Recommended workpiece weight [kg] 19.0 Cylinder volume per double stroke [cm³] 810.0 Min. operating pressure [bar] 4.0 max. operating pressure [bar] 6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.24 Opening time [s] 0.55 Closing/opening time with spring [s] 0.4 max. permissible finger length [mm] 265.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature [°C] 90.0 ...
Schunk Universal Gripper PGNplus 200/2 AS (371455) Size: 200, pneumatic, with gripping force retention: AS • Stroke per jaw: 14 mm • Clamping force: 6250 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 14.0 Clamping force [N] 6250.0 Clamping force (at finger length 0 mm) [N] 7072.0 Min. spring force [N] 1600.0 Net mass [kg] 7.5 Recommended workpiece weight [kg] 23.5 Cylinder volume per double stroke [cm³] 495.0 Min. operating pressure [bar] 4.0 Max. Operating Pressure [bar]6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.3 Opening hours [s] 0.6 Closing/opening time with spring [s] 0.5 Max. permissible finger length [mm] 200.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature ...
Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2001 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :1,776,716,771 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -
pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Demag Model: 200/560-840 concept Year of Manufacture: 2002 Type of Machine : Injection Molding Machine Tonnage : 200 SC Ø: 60 Machine Cycles :555,796,350 Electrical Specifications: - Main Voltage: 3x400V - Frequency: 50 Hz - Current Ratings: - 139 A - 102 A - 37 A - 67 A Hydraulic System: - Clamping Force: 10.0 t - Max Pressure (pmax): 190 bar - Max Flow Rate (Qmax): 164 L/min Find more here - / Contact us at -
max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...
Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.
Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.
internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...
Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.
table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm weight of the machine ca.: 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional Accessories shown are optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.
table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.
Two identical Emag CNC machining centers including a chip conveyor, coolant tank, various holders, jaws and a new AGW are available. Chuck diameter: 200mm, max. circulation diameter: 290mm, max. workpiece length: 140mm, speed: 6000rpm, power: 34kW, torque: 480Nm. Travel X/Z: 550mm/200mm, rapid traverse X/Y: 30m/20m/min, feed force X/Z: 11kN. Tool positions: 12, drive tool power: 7.8kW. Machine dimensions X/Y/Z: approx. 2700mm/1150mm/2800mm, weight: approx. 6500kg. Documentation available. On-site inspection is possible.
max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 200 mm max. clamping width: 205 mm weight of the machine ca.: 21 Kg dimensions: 430x200x195 mm Workbench vice with: Set of pipe jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 0 mm gear width: 120 mm max. module: 3 min. module: 1 total power requirement: 20 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m : : : : : : 5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features REISHAUE ...
rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 12 mm : 375 U/min. working area: 180 - 2000 mm engine output: 0,7 kW weight: 28 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...
width of the strips: 150 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4 kW weight of the machine ca.: 100 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
welding current: 30 - 200 A connected load frequency: 230 V weight: 3,6 kg Dimensions (LxWxH): 290 x 135 x 2600 mm Scope of delivery: TIG welding machine Buddy TIG 160 Electrode and earth cable 3m TIG torch ET 17 4m Gas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 200 mm height: 105/265 mm centre height: 105 mm weight of the machine ca.: 41 kg dimensions of the machine ca.: 400 x 330 x 310 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 x 32 mm grinding wheel hole diameter: 30 mm total power requirement: 0,9 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 620 x 540 x 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm daylight longitudinal/sideways: 1300 /450 mm dayligth: 900 mm tank capacity: 75 l liter capacity: 22 l feed down: 6,9 mm/sec feed up: 12,6 mm/sec Motor output: 7,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring length: bis 2000 mm Tube length: 2280 mm numbers of toolholders: 3 : Rohr galvanisch Verzinkt dimensions: 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
impact length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 73 kg length in width: 620 mm length in total: 2400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M16 mm : max. 187 U/min. working area: 180 - 2000 mm engine output: 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 30 m/sec total power requirement: 3 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 1,2 x 0,5 x 0,75 m Belt sander with - Contact disc: 600 x 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: 200 mm no. of working stations: 2 Stück connected load frequency: 230 V total power requirement: 0,9 kW weight of the machine ca.: 20 Kg dimensions: 0,65 x 0,32 x 0,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 2000 Kg Magnetic field: 350 x 150 mm weight: 70 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
Roller conveyor length: 2000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 55 kg length in width: 620 mm length in total: 2000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 18000 kg Loading weight per level: 3000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg
power capacity:110 kW feed pressure:10 bar Number of working hours:11 372 / Lastst. 7436 h volume capacity:16,75 m³/min total power requirement:110 kW weight of the machine ca.:2,3 t dimensions of the machine ca.:2400 x 1630 x1820 mm
Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
