roland 200 used for sale

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm Control: Heidemhain type: TNC 426 CB mm Rotary table: 1350x1550 mm turning speeds: 10-3000 U/min spindle taper ISO: 50 Table load: 6000 kg T-slot - width: 28h7 mm T-slot - distance: 150 mm number of T-slots: 150 Feed: 10-3000 mm/min total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: m B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

Manufacturer: Gubisch, Type: ES 2000, Year: 1991, Control: Hand, Trimming saw: yes, Durchmesser Säge: 400, Saw kW: 3, rotations controlled: 2800, Working hight mm: 120, Vertikal spindle: yes, Working range Z-axis mm: 300, Length lifting spindle mm: 300, Diameter of the spindle mm: 50, Travels of spindle: 2 x100 mm, Milling spindle kW: 50, rotations controlled: 2800, Working stations: 1, Angular adjustment horizontally: yes, Work piece hight max mm: 120, Hauptmotor kW : 7,5, Wight approx. kg: 2000, Vorschub Stufenlos: yes, Mitre Window: yes, Year :1991

Manufacturer: Signode, Type: Spirit 2000, Bauyeshr : 1993, Control: Programm, Belt width mm: 7, Bandabroller : yes, Bandspannung einstellbar : yes, Feeding belt control: yes, Funktionswiederholung : yes, Ausstattung Fahrrollen : yes, Takleistung min : 25, Foot switch: yes, Kartonformat min. L x B x H mm: endlos x 1200 x 1200, Year :1993

Capacity 200 kg/hour With the DLE Mini deleafer washing system

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Bar diameter 26 mm 12 live tools Turning lenght 180 mm Controller FANUC 16i-TB Spindle speed 12.000 rpm With barfeeder

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 mm direkt : 1:1,25 angle adjustable from - to: -20/ +20 Grad weight: 17,0 kg dimensions: 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25100 Specifications: - Pressure capacity 200 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table width 180 mm - Projection 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Plunger stroke 150 mm - Adjustment range fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - with: - Back gauge with 2 stop fingers - Deer's foot tool - 4-fold universal die - Two-hand control panel, foot switch,

Key data: 200 KW, 250 kVA, 400 V

The Electroquell 250 kVA (200 kW) generator is suitable as a main or backup power source in factories, hospitals and public facilities. The Ricardo engine ensures high performance. Ricardo Euro V-engine ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing made of Al.-Zn. sheet metal Drip pan Engine heating Power: 250 kVA / 200 kW Voltage: 400 V Current: approx. 361 A Large capacity fuel tank Additional options: ATS, remote control, enlarged tank Warranty: up to 60 months

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

UNIVERSAL 2000

1 piece used separator Manufacturer: TiTech Type Titech AutoSort [NIR1-VIS] [S-2000] [X-H] including acceleration band Conveyor width approx. 2,000 mm AA approx. 5,000 mm

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

Punching capacity: 165 kN working area: 2070 x 1280 mm plate thickness: 6,4 mm control: CC 220 workpiece weight: 150 kg punch diameter: 76,2 mm : 80 m/min : 55 m/min weight of the machine ca.: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used stationary dissolver made by Teja, type: DDZ-90-7.5/2000, capacity: 2000 liters. Dissolver equipped with cooling jacket, anchor mixer with scrapers and dispersing mixer. Acid-resistant execution. Motor power 90 kW.

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

AGFA/ Cawo Cawomat 2000 IR - X-ray processing machine • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Quantity: 2 pieces Manufacturer: Knoll Type: 200 S-1 Year of Make: 2013 Total length: 4 m Conveyor belt: 2 m

2 trolleys (1x1x1,9m) Electric heating Air conditioning (cold) Technical data: Jumbo 1 smoke generator 56kW heating power 8kW cooling power

Tetra Pak TBA19 200 ml Slim Filling Line Reliable Tetra Pak carton filling line designed for efficient packaging of liquid food products in 200 ml Slim cartons. The TBA19 filling system offers stable performance and proven technology for beverage and dairy production environments. General Information - Manufacturer: Tetra Pak - Model: TBA19 - Year of Manufacture: 2007 - Version: V030 Technical Specifications - Capacity: 7,500 packs per hour - Package Volume: 200 ml - Package Format: Slim Machine Description The Tetra Pak TBA19 is a reliable and efficient filling solution designed for medium-capacity carton packaging lines. With its V030 version upgrade, the machine offers improved operational stability and performance for continuous industrial production. Key Features - High production capacity: up to 7,500 packs per hour - Compact and space-efficient design, s ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm ...

Drautz lye machine with 2 pullers. and some spare parts Plant technically checked and cleaned. Total length: 3.60m. Hinge folded up 2.50m Width 1.00m Weight 200 kg

Technical data of the shelf connector: Shelving system: Polypal The scope of delivery includes: 01x Shelf connectors, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material colour: sendzimir galvanised Drill hole Ø: 11 mm Weight: 0.250 kg | Pcs. Incl.: 02x Screws M10 x 35 mm 02x Nuts M10 02x Washers M20 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

LVD PPBL 200 ton x 4100 mm Capacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

DAEWOO LYNX 200B LATHE with FANUC control system

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Walter Helitronic RtWN 200 NEGI-U

Bread dough cutting machine, Fabr. W & P, Type Parta U 2

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

2 lactose decanter systems, One is from Sharpes, Alfa Laval Group, Machine built in 1990, overhauled Order No. ZM 6063/90, Masch, No. 2312 Speed max. 3250 rpm, drum diam. 355.6 mm The 2nd machine is from Geißel Maschinenbau GmbH 97246 Eibelstadt Masch. No. 2367 from 1992 Drum diameter 355 mm, speed max. 3,150 per min.

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

weight: 25 kg taper MK: 0 Consisting fo following modules: 4 pcs Multi Quick MQ200 complete 200-160-2428 4 pcs structural element B50 053-200-2428 4 pcs. structural elementB50 053-110-2428 4 pcs. tension shoe 100-2-205-25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 2,200 mm Depth: 850 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01