128,153 used machines on RESALE, but how to find them? Machine Search
centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg
Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 50 mm -Outer: Ø 200 mm -Width: 25 mm -Price: per piece -Number: 1x available -Weight: 1.2 kg
automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t
200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...
Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 32 mm -Price: per piece -Number: 1x available -Weight: 2.0 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 32 mm -Price: per piece -Number: 2x available -Weight: 2.1 kg
Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 530/250/H220 mm -Weight: 31 kg
used spiral mixer Diosna SP 200 D, overhauled, as good as new, for 200 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, machine no. 9912-174, electrics renewed, repainted, new bearings, new V-belts
table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor, electric gear motor -Speed: 142 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Dimensions: 440/245/H170 mm -Weight: 21 kg
Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg
Gear motor, electric motor, electric gear motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 410/210/H230 mm -Weight: 25 kg
Kneading Machine Spiral Kneading Dough Machine Model: Spiralo 200 A sophisticated technology ... already proven many times over! LED control with program control 2 speeds + 1x boiler counter-rotation, 3 timers Doughs from 15 to 200 kg / 10-120 kg flour Flour dust hood with protective circuit Stainless steel boiler and spiral Floor-standing machine with base plate 1 extendable tank car DGUV V3 tested Connection 400V, 13.5 kW, 32A-CEE plug Dimensions: 1020 x 1720 x 1430/1945 mm, WxDxH TOP quality and price in one machine! New machine with 24 months warranty + service package Option: Additional tank car 200 Soft starter Maintenance contract Many more spiral mixers in stock!
Key data: 4 mm
Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Hydraulic knife clamping and locking+ Cutting depth infinitely adjustable with digital display New set of upper and lower knives installed Weight: approx. 1,000 kg
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
Jacobsen M 2000 Mounted - Cylinder mower for push and PTO drive 1,000 rpm in the direction of travel turning left, three-point hitch Cat. I., approx. 210 cm working width, 3 spindles 6-blade hydraulically driven, hydraulic lifting, spindles follow the curve radius by articulated arrangement (limited). According to the previous owner, only 1 mowing season used, year of construction unknown. Other attachments - cylinder mowers make Bucher, Loipfinger, Ransomes, SABO available - see photos. Information on request, also self-propelled Ransomes motor Triple MK IV M, many Ransomes parts, including complete spindle units. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Dimensions: 570/240/H200 mm -Weight piece: 37 kg
Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg
Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250
Gear motor, electric motor -Speed: 83 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 440/240/H210 mm -Weight: 26 kg
Gear motor, electric motor, electric gear motor -Speed: 16.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: -Weight: 33 kg
Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 530/240/H220 mm -Weight: 31 kg
Gear motor, electric motor -Speed: 14.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 22 kg
Key data: 300 mm
Mazatrol PC Fusion 640 T Travel X/Y/Z/B: 180/100/575/585 mm max. turning diameter 300 mm Bar passage 51 mm Main spindle 18.5 kW, max. 5,000 rpm Spindle nose A2-6 Sub-spindle 7.5 kW, max. 5,000 rpm Bcpr3pc7jma 16-speed turret, all stations for driven tools Max. speed: 4,500 rpm Tooleye Parts catcher Interface for bar feeder LNS Quick Load Servo III Bar Feeder Conveyor Streamware High Pressure Pump, 20 bar Coolant Temperature Control, Parker Hiross Hyperchill ICE005/230/1/5 Oil mist extraction Hainbuch Collet chuck for main and sub-spindle Tool Holder Package
turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min bar diameter: 51 mm spindle bore: 75 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: --- h - control: FANUC Oi-TC - Machine with C-axis and turret for driven tools (no driven tools in the accessories accessories available - Tool measuring arm - Parts collecting tray - Collet chuck device - 3-jaw chuck Ø ...
AUTO Mounter FLAMM 2000 Max. Working width = 2000 mm The printing plate with Micro Dots is placed on the conveyor belt and then glued to the print sleeve precisely and independently by the system. Several plates can be glued on. The setting data and are available again for the next job.
Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg
Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg
Gear motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Price: per piece -Number: 2x available -Dimensions: 580/260/H200 mm -Weight: 40 kg
Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters
thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm Condition: unused: New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 700, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 370 mm, 1 mm
Year of construction 11-2017 Commissioning 2018 Smooth G control Travel: X1/X2 axle: 207 /141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axle: 1,225/1,280 mm Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. bar passage: 65 mm Main spindle 22/15 kW, A2-6 spindle nose Main spindle max. speed 5,000 rpm Main spindle C-axis: 0.0001° Sub-spindle 22/15 kW, A2-6 spindle nose Sub-spindle max. speed 5,000 rpm Sub-spindle C-axis: 0.0001° 2 pcs 12-cavity turret with 12 driven tool stations Max. speed driven tools 6,000 rpm Cylinder interpolation Interface bar feeder Bar Loading Magazine, Hydrafeed Multifeed MX-1B 3-jaw chuck Kitagawa BB08 for main spindle Collet chuck Hainbuch 52 mm, axfix for sub-spindle
Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...
Silo 2 m³ volume, payload 3.2 to, dead weight 690 kg Dimensions 1200 x 1600 mm, height 2200 / 2980 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve
Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg
Weighing range max. 750 g d=0.05 g e=0.1 g Load cell EC 2000 Belt run from left to right Belt width 145 mm Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm Bad ejection through pneumatic pusher Without printer Non calibratable Drive 230V/50/60Hz
Laser welding machine with 200 watt laser power - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 520/230/H240 mm -Weight: 27.7 kg
maximum number of results exceeded
please refine your search
