roland 200 used for sale

Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...

Gear motor, electric motor -Speed: 14.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 22 kg

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg

Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Price: per piece -Number: 2x available -Dimensions: 580/260/H200 mm -Weight: 40 kg

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 520/230/H240 mm -Weight: 27.7 kg

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Dimensions: 640/205/H270 mm -Weight: 38 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21.5 rpm -Power: 0.3 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 450/250/H220 mm -Weight: 25.4 kg

Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow

Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5/78 rpm -Power: 0.07/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 455/210/H205 mm -Weight: 22 kg/piece

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Used ribbon mixer by Riela. Capacity 2000 L. Engine power 11 kW.

automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t

Length of the grinding (mm) 6000 Width of the grinding (mm) 2000 Height of the grinding (mm) 1250 Weight: 60T Overall dimensions Width 2940 mm Height 5120 mm Length 16640 mm

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4230 Kg approx.

We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

Saw blade, wood saw blade, circular saw blade -DB 05/01 -Ø 200x6.0x60 -Z24 -n max. 9500 -Price: per piece -Number: 1x available -Weight: 1 kg/piece

TRAUB Sonim TND 200 CNC Lathe YOM 1994 CNC Lathe – Inclined Bed Type TRAUB TX8F CNC control Turning diameter 350 mm Turning length 200 mm Total power requirement 20 kW Turning diameter over bed slide 200 mm X-axis 180 mm Z-axis 300 mm Spindle bore 42 mm Spindle motor 12 kW Spindle turning speed range 10 – 5000 rpm Feed speed X:155, Z:250 mm/min Rapid Travel Speed X-Axis 15 m/min Rapid Travel Speed Z-Axis 25 m/min Weight of the machine ca. 4 t Dimensions of the machine ca. 6.5 × 1.5 × 1.75 m 12-fold revolving head Traub Bar loader 3-fold power chuck Chip conveyer

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition

Saw blade, wood saw blade, circular saw blade -0402-5021202 HW -UFN - equipped -Ø 200x4.1/2.8x65 -Z36 = T 17.44 -n max. 9000 -Price: per piece -Number: 2x available -Weight: 0.7 kg/piece

200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

USED TETRA PAK TBA 19 200ML SLIM 30V FILLING LINE FOR SALE Item #: Usm-198 Category Tetra Pak TBA 19 1-TBA 19 200ml Slim Filling Machine, Year of Manufacturing 2007, Working Hours 9500 2-Straw applicator, TSA 21, Year of manufacturing 2007, U Type Straw, Version 200v 3-Cardboard Packer, TCBP 70, Version 110, Package pattern: 3x9. Feeding side: Right. Infeed form: Z 4-Conveyors and Paper trolly CONDITION: EXCELLENT

Saw blade, wood saw blade, circular saw blade -0504-5041355x HW -UFN - equipped -Ø 200x4.0-7.0/3.0x70 -Z12 = T 26.16 -n max. 9000 -Price: per piece -Number: 1x available -Weight: 0.7 kg/piece

hydraulic unit, hydraulic pump, hydraulic pump -Max. Pressure: approx. 200 bar -Litre capacity: approx. 6 l/min -Hydraulic tank: liters -Hydraulic valve: -Dimensions: mm -Weight: 36kg

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 300 V 165 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 200 kg

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power output: 25 kVA -Dimensions: 800/400/H320 mm -Weight: 224 kg

NH fuse -NH 1 -200 A 500 V AC 440 V DC -Price: per package -Quantity: 4 pieces -Weight: 1.1 kg

used spiral mixer Diosna SP 200 D, overhauled, as good as new, for 200 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, machine no. 9912-174, electrics renewed, repainted, new bearings, new V-belts

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply for servo amplifiers -AC supply voltage: 18-110 V rms/47-63 Hz -DC link voltage: 24-155 V -Dimensions: 60/165/H240 mm -Weight: 1.7 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 159/200/200 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 3x discs available -Price: complete -Weight: 11.8 kg