roland 00 used for sale

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 32 mm -piston rod: 20 mm (connection: M12 x1.25 thread) -Air inlet and outlet: adjustable -Price: per piece -Number: 3 pieces -Dimensions: 310/46/H46 mm -Weight: 0.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 63 mm -Piston rod: 20 mm (connection: M16 x1.5 thread) -Dimensions: 400/75/H75 mm -Weight: 2.55 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 63 mm -Piston rod: 20 mm (connection: M16 x1.5 thread) -Price: per piece -Number: 4 pieces -Dimensions: 360/75/H75 mm -Weight: 3.05 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 40 mm -Piston rod: 16 mm (connection M12 x 1.25 thread) -Air inlet and outlet: adjustable -Number: 5 pieces available -Price: per piece -Dimensions: 325/53/H53 mm -Weight: 1.65 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 50 mm -piston rod: 20 mm (connection M16 x1.5 thread) -Price: per piece -Number: 5 pieces -Dimensions: 260/65/H65 mm -Weight: 1.6 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 272/65/H65 mm -Weight: 2.05 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 50 mm -piston rod: 20 mm (connection: M16 x1.5 thread) -Price: per piece -Number: 3 pieces -Dimensions: 255/65/H65 mm -Weight: 2 kg/piece

Starter Bosch -Bosch type: 0 001 368 616 -Voltage: 24 V -Teeth: 9 -Dimensions: 370/125/H170 mm -Weight: 16 kg

Servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Max. Speed: 2500 rpm -Power: 3.97 kW -Torque motor: 21 Nm -Construction: B5 -Number: 2x motors available -Price: per piece -Dimensions: 370/140/H175 mm -Weight: 19 kg/piece

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 265 mm -Price: per piece -Number: 2 pieces -Dimensions: Ø 28 x 265 mm -Weight: 0.8 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

Control unit, control panel, control panel, control unit, keyboard, screen, control -Control comes: from a machining center BJM type ALBZ-145 -Manufacturer: BJM Beckhoff -Dimensions: 603/418/H100 mm -Weight: 16.2 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 690 rpm -Shaft: 2 x Ø 19/40 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4 pieces -Dimensions: 314/213/H162 mm -Weight: 9.1 kg

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: approx. 40 l/min -pneumatically driven -Connection: 8 bar max. -Dimensions: 270/200/H140 mm -Weight: 6 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection M 16 x1.5 thread) -Total length: 356 mm -Total length extended: 516 mm -Air inlet and outlet: adjustable -Number: 6x available -Price: per piece -Weight: 3.6 kg

Electrical Transformer Brand JEUMONT SCHNEIDER Power 36,000KVA High voltage 89.5 KV Low voltage 125 KVA ODAF Cooling Mode Year 1997 HTBT HS Traverse

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.

Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 -Dimensions: 245/175/H140 mm -Weight: 5.8 kg

Bending tool, die, upper knife, upper tool, tool for press brake -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packed: in wooden box -Weight: 11.9 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Geared motor Article number: FDU1703/2358228 001 2KJ3501-5EK23-2HD1-Z BAZ29-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:281r\min 60HZ n2:340r\min 19Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703/2358232 003 2KJ3502-7EK23-2HG1-Z BAZ39-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:181r\min 60HZ n2:219r\min 24Kg NEW and fully functional, from stock, see pictures for more details.

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-30-001 -Quantity: 1 available -Dimensions: 400/55/H310 mm -Weight: 4.9 kg

Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine

Servo motor, electric motor, DC motor -Max. speed: 6000/49 rpm -Power: 0.52 kW -Motor torque: 1.15 Nm -Shaft: Ø 25 mm -Design: B5 -Transmission manufacturer: SEW Eurodrive -Type: RF27 AQH80/2 -Translation: 1:28,37 -Dimensions: 410/140/H140 mm -Weight: 8 kg

Fuel sensor, tank sensor, float, tank gauge -Part number: 14373363-3 -Dimensions: 740/110/H70 mm -Weight: 1 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston: Ø approx. 40 mm -Piston rod: Ø 20 mm -Connection piston rod: M16x1.5 -Dimensions: 55/H260 mm -Weight: 1.45 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 25 mm -Piston diameter: 63 mm -piston rod: 20 mm (connection M 16 x 1.25 thread) -Total length: 220 mm -Total length extended: 245 mm -Air inlet and outlet: adjustable -Number: 1x available -Price: per piece -Weight: 2 kg

Beckhoff CP7001 - 1019 - 0000, 12,1" Display für Heinen Steuereinheit gebraucht . For Jagenberg Diana Pro. Used, tested.

SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-70-0090PPV -Piston: Ø 70 mm -Stroke: 90 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 93/93/H295 mm -Weight: 3.5 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 210 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Total length: 370 mm -Total length extended: 580 mm -Quantity: 1 available -Dimensions: 46/46/H370 mm -Weight: 1.65 kg

Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg

Line filter, power line filter -Manufacturer: Bosch Rexroth -Type: NFD03.1-480-007 -Connection: AC 480 V -7A + 10% -Hz: 50-60 Hz -Number: 2x available -Price: per piece -Dimensions: 190/90/H50 mm -Weight: 0.76 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: Gewefa -Type: 05.006.003/3-32Ø -Weight: 3.4 kg

Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Machine controller, Electronically controlled drives with mechanical governor, EGB Electronically Controlled Actuators with Mechanical Governor Backup -Manufacturer: Woodward Governor -Type: A 8240-007 -Quantity: 1 piece available -Dimensions: 220/140/H150 mm -Weight: 9kg

Alternator regulator -Manufacturer: Bosch -Type: 0190113 004 850 -Number: 1x controller available -Price: per piece -Weight: 1.6 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Toothed shaft holder: Ø 25 mm -Length: 25 mm -universal applicable -Number: 2x motors available -Price: per piece -Dimensions: 290/160/H160 mm -Weight: 13.5 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of work platforms from GSL (German Standard Lift) -Shaft cone holder: Ø 35 to Ø 41 mm -Cone length: 60 mm -universal: applicable -Number: 1x motors available -Price: per piece -Dimensions: 365/150/H150 mm -Weight: 23 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 7.0 mm -Width: 39 mm -Length: 22,000 mm -Number: 1x ribbons available -Price: per piece -Weight: 6 kg

Tire with rim -Tire size: 16.00 R20 -Dimension: Ø 1320 mm -Weight: 246 kg

Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece

Control card, output card, controller, base, control amplifier -Manufacturer: Sutron -Type: 71023.000 -Number: 1x control cards available -Price: per piece -Dimensions: 100/175/H20 mm -Weight: 0.12 kg

Control card, input card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0002 -Type: 4008390002 -Number: 2x control cards available -Price: per piece -Dimensions: 135/65/H200 mm -Weight: 0.5 kg

Control card, hot melt adhesive, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-008-39-0001 -Type: 4008390001 -Number: 1x control cards available -Price: per piece -Dimensions: 100/40/H170 mm -Weight: 0.34 kg