rol forming metal used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19600 € : 401.8 € : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: . mm plate thickness: . mm pre-bending: . : verstellbar weight of the machine ca.: 150 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 126200 € : 2511.38 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58900 € : 1183.89 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 66200 € : 1330.62 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 78900 € : 1585.89 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92800 € : 1865.28 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89400 € : 1796.94 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...

roll surface width: 3000 mm length: 5000 mm width: 2000 mm height: 2100 mm side roll diameter: 300 mm material strength at pre-bending: 18 mm : 3 Bending speed: 0-5 °/sec output: 20 kw weight of the machine ca.: ca. 13000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Formingmachine for meat rolls (frikandellen afkorter) Belt width: 700mm With outfeedbelt

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Dough forming machine for small pastries MANOTRAD - manually operated - without electrics - mobile - optional with tin cart

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Product number: 1588 Type: VM400HS Serial number: 1447 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.8kW Dimensions: 2450 x 1000 x 2150 mm Weight: 810 kg With BVP bridge breaker in hopper

Product number: 1590 Type: VM400HS Serial number: 1698 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.7kW Dimensions: 2150 x 1000 x 2150 mm Weight: 940 kg With bridge breaker in hopper

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg

Product number: 1854J Type: NM-500 Serial number: 10062 Year of construction: 2013 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 420V, 50Hz, 32A Dimensions: 4600 x 1400 x 2850 mm Weight: 3650 kg With Tender-Form® and Paper interleaver Including lifter for 200L meat bins, 2 pc. tool trolley and several forming plates

Quark balls or spray pastries of the ball portioners are Serving small amounts of homogeneous masses for filling patisserie products in small-volume production,all in manual operation. Robust design, easy to clean. Dosing quantity infinitely adjustable. All parts in contact with the filling compound are made of stainless steel or food-grade plastic. with stainless steel stand Visit our Milbrandt Outlet with many machines and equipment!

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Product number: 1916J Type: NM-500 Serial number: 10032 Year of construction: 2012 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 460V, 60Hz, 26A Dimensions: 3300 x 1150 x 2500 mm Weight: 3650 kg

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Used Marel Stork THV 630 former is used for shaping and forming various meat products, such as burgers, meatballs, nuggets, sausages, and patties. It helps create uniform shapes and sizes for consistent portioning and presentation. THV 630 former has a belt width of 630mm. This width allows for efficient processing of meat products within that range. Marel is known for prioritizing hygiene and food safety in their equipment designs. The THV 630 former is designed with features that facilitate easy cleaning and sanitization. It typically has removable parts, smooth surfaces, and meets the necessary food-grade standards. The THV 630 former is equipped with advanced automation and control systems. These systems offer precise control over shaping parameters, production speed, and product consistency. The automation features help improve efficiency, reduce labor requirements, and ens ...

Used Marel Townsend THV 400-E65 former is designed to streamline the process of shaping and producing burgers with a different size or quantity and various shapes. Townsend former employ advanced technology and automation to mold the ground meat or plant-based mixture into consistent and uniform shapes. It feature adjustable mould variations, allowing for customization of diameter, and weight according to specific requirements. In set with loading for 200l meat bins and lots of new original spare parts. Whole construction is made of stainless steel and food approved plastic which guarantees the ease of maintenance and the highest hygiene at work. Square moulds dimensions: 90 x 115mm, 77 x 110mm, 80 x 110, 90mm x 115mm Oval moulds diameter: 40mm, 50mm, 115mm Dimensions: 2400 x 1000 x H2200mm Max height with loading: 3300mm

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Sind Hamburger forming machine

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

LIQUIDATION of complete line of chapata forming with the option of 2 sizes. Our "Multipurpose Line" allows us to continuously and automatically produce a wide range of products such as chapata. Manufacturer: CANOL. The line includes the following models of CANOL machines: MCI 690, PRE 700 C/O, MUL 700, TR/D, GH/MR/65. Thanks to the 'Zero Stress' technology applied to our pasta extruder, it is possible to treat all types of sourdoughs with a high moisture content gently and without stress, safeguarding the gluten structure, keeping the structure of the dough stable and avoiding the loss of yeast gas from it. Thanks to the use of this methodology, the final quality of the products obtained, both frozen and cooked, is considerably superior to traditional systems and lines. Our line "Multipurpose Line" is characterized by the ease and speed in the passage of production from one product to ...

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Square or rectangular skewer former, semi-automatic. • Manufactured by EMSENS model ESA (France) • Different foods such as meat, fish, vegetables, fruits and other processed products can be used. • Previously prepared ingredients to then place them manually in the molds. • We can make skewers and Moorish skewers in it. • Ergonomic that optimizes the operator's gestures and movements. • Ease of cleaning linked to a design that takes into account agri-food constraints. • Maximum productivity. Condition of the machine, in good condition, checked, guaranteed, reconditioned and tested. • Complies with the following directives and standards: - For contact with food: EC 1935/2004 - Good Manufacturing Practices: EC2023/2006 - Machine with: EC2006/42 - EMC: EC 2004/108

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Vemag mobile forming machine, model: FM250, number: 2500621, year of construction: 2016, 220-240/400-460/575 V, 3 Ph, 50/60 Hz, 4 A, 2.5 kW, 340 kg, plastic belt, belt width: 250 mm, total dimensions: 2000 mm x 820 mm x 1600 mm.

CFS Bakel B.V. forming machine, type: MLF 600, machine number: 800, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 48 A, 23 kW, weight: 1782 kg, dye: (6x) 235 mm x 35 mm, total dimensions: 2400 mm x 1200 mm x 2600 mm. Incomplete.

Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005