rol forming metal used for sale

Make WM Model FC 780E Year 2007 Condition Excellent Hours approx 29950 Delivery Date Immediately Stations Forming, Cutting and Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale

Product number: 2786 Type: MLF600 Serial number: 726 Year of construction: 2001 Belt width: 600 mm Capacity: max. 75 strokes/min. Hopper: 380 litres Compressed air: 6-8 bar, 300 nl/min. Power: 3 x 400V, 50Hz, 23kW Dimensions: 2270 x 1660 x 2550 mm Weight: 1782 kg

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Pastry machine Janssen Model: FF 2500 with 1 rollers and 10 sheets Table Machine Biscuit machine! Connection 400 V, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery equipment warehouse!

Used minced meat production and packaging line. New 2010. 1.Minced meat production and portioning line - specification Assumptions: -Product: pork minced meat -Product: pork minced meat -Product capacity: approx. 800 - 900 kg / h -Packaging line capacity: up to 55 - 60 portions (500 grams) /minute -Packaging machine capacity: up to 40 trays/minute -Portion size: 500 g -Packaging format: TRAY SEALER / MAP packaging/. -Packaging: PP: 205 x 160 x 50 mm -Packaging: automatic -Product temperature: - 1 /+ 1 °C -Declared portioning accuracy: +/- 1.5% (depending on the product) -Vacuum Tumbler REX RVF 736 -Machine suitable for stuffing, mincing and portioning -Construction in stainless steel -Operation via 12" touchscreen -Memory: 100 operating programmes Stuffing capacity: up to 3600 kg / h -Productivity for filling: up to 3600 kg / h -Productivity for minced meat portionin ...

Product number: 2800I Type: VM400HSE Serial number: 2086 Year of construction: 1999 Belt width: 400 mm Capacity: max 55 strokes/min Hopper: 270 litres Water: 4 Bar Compressed air: 6 - 8 Bar, 300 l/min Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2750 x 900 x 2350 mm Weight: 1186 kg

croissant rollers

Product number: 2825 Type: VM600HSE Serial number: 639 Year of construction: 1998 Belt width: 600 mm Capacity: max 65 strokes/min. Hopper: 320 litres Water: max 4 Bar Compressed air: 6-8 Bar, 300 L/min. Power: 3 x 380V, 50Hz, 22kW Dimensions: 2300 x 1650 x 2100 mm Weight: 1800 kg

Product number: 2831 Type: VM400HD Serial number: 1751 Capacity: 50 strokes/min. Belt width: 400 mm Power: 3 x 380V, 50Hz, 7.7kW Weight: 830 kg

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

OMG OMF/PVE 50-PN-M Technical specifications: Manufactured: 2005 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg The price includes dismantling and loading costs

Machine designed for product forming. – Manufacturer:Koppens – Model: VM 400 HD – Power: 7.67 kW – Voltage: 380 V – Amperage: 16.57 A – Frequency: 50 Hz – Weight: 830 kg – Mesh belt conveyor – Conveyor width: 400 mm – Dimensions (L x W x H): 2000 x 950 x 2350 mm

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

MACHINE WAS ORDERED BARND NEW FROM THE 1. ST OWNER MACHINE IS STILL ON POWER WORKING DAYLY ORDERS LASER POWER : 2000 W MAX SHEET THICKNESS: 4 mm MAX PUNCHING FORCE: 165 kN ATTACHED VIDEO FOR CUSTOMER WE CAN ORGANIZE DISMANTLING, TRANSPORT

Continuous production makes up to 150 portions per minute with maximum weight accuracy. for diameters up to 50 mm Power: 0,4 Kw 400v/3ph/50hz Fully refurbished

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Fish or meat ball former, model SY019, made entirely of stainless steel. External dimensions: 970 mm wide x 570 mm long x 1970 mm high. Output: 600 units/minute Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

Fish or meat ball former, model YW-500, made entirely of stainless steel. External dimensions: 730 mm wide x 600 mm long x 1820 mm high. Output: 550pcs/minute Its condition is excellent re-release. Virtually new overhauled and guaranteed equipment. OCCASION. NEGOTIABLE PRICE.

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Pastry line whit tools for cutting , and filler

Koppens BVE400 HD Former Stainless Koppens forming machine, comes with lots of different forming plates for different size products, previously used for hamburgers, belt 400mm, variable speed, up to 50 cycles per min, 3Ph

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Staple forming machine SpeedySeamer RAS 22.07 Production of all staples for the ventilation industry Max. profile height 20 mm Speed 16 m/min Processing stations 7 Max. sheet thickness 1.5 mm Based on strength of 400 N/mm². Lifting device for aluminum sheets Reduces pressure and prevents aluminum breakage - Straightening roller for left and right roller set with adjusting wheel - For upward straightening of bent sheets - For rounding the bend Support tables - Standard version - With right-hand sheet guide - With left-hand sheet guide

Boix Q1530 Tray forming / Tray erecting machine OPERATION : Mechanical, Electrical and Pneumatic BOX DESIGN : PLAFORM, P-84, CITRUS BOX, C-1, BIG EAR, COLUMN ESTIMATED PRODUCTION : 6 Speeds from 800 to 1.800 trays/hour (at intervals of 200) GLUE SYSTEM : By injection, Hot-Melt, Melton NC-16 (cap. 14 kg.)

Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm

Description: machine for profiling sinusoids into a radius weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 2,000 x 1,500 mm

Polytype BDM 681 Polyflex, for round cups, age 2014 only used for less than 20,000 hrs. The pre-treatment and the UV-Mandrel curing are integrated in the basic machine concept. The newly designed cup in-feed and discharge automation round off the system. The main characteristics of BDM 681 printing technology are the very high effiency, the outstanding print quality, the short change-over time as well as the excellent accessibility and ergonomics (one operator layout). Technical data: Min./max. cup height: 35 -200 mm Min./max. rim diameter: 60 - 185 mm Min./max. taper: 2 - 15° Max. print height: 145 mm Max. print length: (6 sections) 273/345 mm Max. print length: (3 sections) 418/502 mm Max. printing speed: 650 cups/min Servomotor Universal Screw Denester UV Unit with dual 6" UV-Lamps FHW 3.0 CP Corona Pretreatment with Leak Tester. The Print Heads are modern day Print Heads ...

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Subal bread forming machine, model: TSM-600, number: 0409301, year of construction: 2004, 0.75 kW, cloth belt, belt width: (2x) 570 mm, total dimensions: 2500 mm x 900 mm x 1450 mm.

Gaser mobile hamburger forming machine, model: V3000, serial number: 895-1546, plastic belt, belt width: 150 mm, s/s mesh belt, belt width: 125 mm, form dimensions: Ø 80 mm, total dimensions: 2100 mm x 650 mm x 1420 mm.

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements. Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Description: Manufactured: 2005 Serial number: 1226 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg Approx. Onsite Dimension. (l x w x h): 12,000 x 2,000 x 2,600 mm, weight approx.: 8,000 kg

Description: Paper Plate forming machine Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,800 mm, weight approx.: 500 kg

Description: Paper Plate forming machine Approx. Onsite Dimension. (l x w x h): 1,200 x 1,800 x 1,800 mm, weight approx.: 500 kg

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

LEISTER TRIAC heat gun, heat gun. Embossing on the device: K.LEISTER TYPE TRIAC CH-KÄGISWIL Motor 60W 220V ~6.6A Max 1460W 12820 Made in Switzerland GS S+ Used, very well preserved with signs of wear. Includes accessories, as pictured. Two-stage Cable length 3m Machine for processing and welding plastic geomembranes, shrinking plastics, films and other applications.

Verbufa forming machine, type: MFD 400, type number: 51276-C-0012, serial number: 2085952, year of construction: 2008, 230 V, 50 Hz, 10 A, dimensions: 1400 mm x 1500 mm x 1700 mm. Including 2 crates with parts.

Large amount of forming plates for Marel TSM Profiller slicer, 92 pieces, details: 27 x W 95, 28 x W 65, 29 x W 150, 6 x W 85, 2 x W 80.

Deighton Manufacturing UK LTD hamburger forming machine, model: Formatic retail machine, serial number: R2200/03/05/039, 220/240 V, 1 Ph, 50 Hz, 550 W, burger form: ø 105 mm, total dimensions: 880 mm x 600 mm x 650 mm. Without trolley.

Formatic mobile burger forming machine, S Series 180 Stacking M/C, burger form: Ø 110 mm, total dimensions: 1500 mm x 950 mm x 1900 mm. Missing outfeed belt.

Table Device Stainless Steel Tricher Screw with electric drive for 100 mm Elisen / Gingerbread Manual operation Connection 220 V Used appliance cleaned Another 400 bakery machines in stock!

Handtmann mobile forming machine, type: FS 510, number: 43536, year of construction: 2019, 400 V, 50 Hz, 9 A, 5.5 kW, weight: 800 kg, filling flow divider unit, type: FST 546, number: 18200452, year of construction: 2019, 8 lanes, plastic belt, belt width: 600 mm, total dimensions: 3300 mm x 1280 mm x 1600 mm. Including extra plastic belt.

CFS forming machine, type: PRF 600, machine number: 719, year of construction: 2002, 380 V, 3 Ph, 50 Hz, 53.4 A, 30 kW, 2850 kg, s/s mesh belt, belt width: 600 mm, total dimensions: 3500 mm x 1500 mm x 2170 mm, missing display. Including s/s tool trolley, dimensions: 1820 mm x 800 mm x 900 mm and pallet box with large amount of parts and forms, among others: ( 5x) 110 mm x 60 mm oval shaped, (5x) 105 mm x 55 mm oval shaped, (4x) 115 mm x 105 mm oval shaped, (5x) 105 mm x 65 mm oval shaped, 3 forms for nuggets and 2 forms for schnitzel, and 2 displays.

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

workpiece diameter:360 mm centre distance:600 mm turning speed range - stepless:2 - 1.550 U/min transmission ratio:2 tailstock travel:800 mm power maindrive:33 kW :160 kVA weight of the machine ca.:17 t precision flow-forming machine with 2 rolls, slides with 2 roller under 90°, central lubrication, max. round blank dia. 380mm, bed length 3.670mmm, mainspindle speeds infinitely variable, hydr. roller drive, swivellable roller bearings, coolant device 800 l, only approx. 4.300 working hours

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 59 mm   external diameter max.: 100 mm   wall thickness min.: 1.5 mm   wall thickness max.: 3 mm   length min.: 3000 mm   lenght max.: 12000 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1500 mm System consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm