rod used for sale

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

Round bars, D8 to D28mm, 729kg, 657m, 1.1181 C35/C45 , new -70% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. Material: 1.1181 C35/C45 Condition: bright, The delivery consists of: D 8 mm 89,5 kg ca 226,8m D 10 mm 12,0 kg ca 19,5m D 12 mm 103,5 kg ca 116,6m D 13 mm 68,5 kg ca 65,7m D 14 mm 16,0 kg ca 13,2m D 15 mm 50,0 kg ca 36,0m D 16 mm 72,0 kg ca 45,6m D 17 mm 107,0 kg ca 60,1m D 18 mm 24,0 kg ca 12,0m D 20 mm 54,0 kg ca 21,9m D 21 mm 34,5 kg ca 12,7m D 22 mm 33,5 kg ca 11,2m D 25 mm 41,5 kg ca 10,8m D 28 mm 23,5 kg ca 4,9m Rods in 3m length, some short ones are also included. Some rods are stainless steel 1.4104 6 month warranty according to our general conditions of sale.

Push rod tensioner, push rod tensioner set DE-STA-CO Model 607 607 - M stroke: 41 mm Push rod tensioner set consists of 2 push rod tensioners ! New ! Dimensions: 160 x 110 x 85 mm

Rotary encoder, speed sensor HEIDENHAIN ROD 436.0003 - 5000 ( ROD436.0003-5000 ) 261 436 13 with approx. 1.0 m cable New ! Dimensions: 80 x 60 x 60 mm

Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm

PART NUMBER: 7458 SPECIFICATIONS - max diameter of the machined pins 120mm - 60mm sleeve installed - 5 additional bushings 40, 70, 80, 90, 100mm - max input material diameter 150mm - min input material length 800mm - max machining allowance per side 15mm - knife head drive motor 18.5kW - 4 types of speed feed + forward/reverse - feed motor about 1.1kW Successively: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling outhands - dimensions length/width/height 3060x1240x1400mm - weight about 1800kg ADVANTAGES – Polish production – 3-knife head – additional bushings included – used turning machine, very good condition Net price: 36900 PLN Net price: 8581 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

Dimensions (L/W/H): 920x760x1000 mm Weight: 250 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 12 connecting rods with the part. 380683 for sale.

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo 1-2 year of construction from 04-2016for the proofing chamberRound elements 20mm diameter580/500mm230 volts / 600 wattsDetails see picture

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo transverse insertion for the proofing chamberRound elements 20mm diameter870/770mm230 Volt / 600 WattDetails see picture

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail Piccolo year of construction from 04/2016for the steam / fermentation chamberRound elements 20mm diameter1080/1000mm400 volts / 1100 wattsDetails see picture

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail Piccolo year of construction until 04/2016for the steam / fermentation chamberRound elements 20mm diameter1250/1160mm400 volts / 1100 wattsDetails see picture

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo 1-2 year of construction until 04-2016for the fermentation chamberRound elements 20mm diameter680/580mm230 volts / 600 wattsDetails see picture

Linear drive, linear gear, lifting gear, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, servomotor, servo cylinder -Piston: Ø 32 mm -Stroke: 100 mm -Gliding guide -Stepper motor -Spindle pitch: 8 mm -Brake -Robotics cable -LECP6/LECA6, PNP, version with cutting data input -DIN- rail mounting -Dimensions: 630/320/H460 mm -Weight: 56 kg

TIG welding rod, welding wire Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades. -net weight: 5 kg -Number: 2x package available -Price: per package -Weight complete: 5.2 kg/package

Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm

TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, Stud bolt M10 x 200 50 pieces/carton -Type: Type 2 SW 7 -Material: Stainless steel A2-70 -Quantity: 13 boxes available -Price: per carton -Cardboard dimensions: 220/220/H90 mm -Weight: 6.2 kg/carton

Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor

Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive

SHORT ROD AUTOMATIC LOADER IRCO BREUNING ILS – RBK 100 With servo drive Year 2006 Material length: 1200 mm Material diameter from 0 to 5 mm – max. 0 to 102 mm

used Picard pipe rod with pipe rod holder, self-made, 2700 mm, is sold in its existing condition Working width: h 50 mm Working length: 2700 mm Weight: 35 kg Colour: black

used Picard pipe rod with pipe rod holder, self-made, 2700 mm, is sold in its existing condition Working width: 50 mm Working length: 2000 mm Weight: 30 kg Colour: black

Set consisting of industrial screws and assorted fasteners, including several threaded rods, fastening accessories and various parts packaged in Bossard boxes. This set is suitable for maintenance workshops, assembly companies, metal construction, locksmithing, general mechanics or resale of technical consumables. Content sold in a single lot according to the photos available. Auction-ID: A1-48554-246

Auction-ID: A1-49606-1311

Auction-ID: A7-49599-6

Dimensions approx. L76 x 40 x H120cm. Various types of threaded end. Auction-ID: A1-49846-130

VELP OV 625 homogenizer complete with grinding rod and stand New equipment in its original packaging Model No.SA20900470 OV625 Materials: Aluminium – Technopolymers Volume: 0.2 ml – 2.5 L H2O Maximum viscosity: up to 5,000 mPa s Speed: 3,000 – 25,000 rpm Speed Control: Digital Speed adjustment accuracy: 200 rpm With 20mm diameter dispersing tool With stand Power consumption: 800 W Weight: 2.4 kg Dimensions: 92x280x130 mm (3.6x11x5.1 in)

Type: RTC-DA-032-1000 HC - MBM , Aventics, Rodless Pneumatic Cylinder , new Dimensions _1240 , W- 105, H-84mm , New. 12kg with Rexroth guide rails, P-max: 8 bar, piston force 500N, Carriage 170x100mm, 3 T-slots, Several pieces, price on request per number of pieces. NP: approx. 1400,-

A total of 10 pieces ; unused ; different varieties ; see photos for more details Auction-ID: A7-49942-503

A total of 10 pieces ; unused , different varieties ; see photos for more details Auction-ID: A7-49942-505

A total of 10 pieces ; different types ; see photos for more details Auction-ID: A7-49942-510

A total of 14 pieces ; different varieties ; see photos for more details Auction-ID: A7-49942-506