robot used for sale

Weight: 1.45t, with Industrial Robot Fanuc M20 iA, max. load: 20kg, the system has been idle for three years already.

Abicor Binzel torch neck for robot 962.0300 Robo-WH-241 straight M6 New Stock Net amount plus 19% VAT

Automation of the packaging process, including (1) Industrial Robot Kuka KR 3, weight: 53kg, year of construction: 2005 (2) 2x Labelling Machine Etipack SURPRISE 13, year of construction: 2007.

Weight: 1.12t, operational hours counter: 15,840h, with controls, the robot ran in two-shift operation, a second control system in mint condition is still available.

The robot is unused and still in its original packaging.

A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.

Description Cartesian Robot With Double Vertical Axis X Axis Travel: 2500 mm Y axis stroke Product side: 850 mm Y axis travel on sprue side: 850 mm Z axis stroke Product side: 1500 mm Z Axis travel on Matarozza side: 1500 mm Gripper overturning: 90 ° Motors: AC servo motor Euromap 12

Robot Fanuc M-20iA Year of construction: 2012 Payload: 20 kg Arm area: 1811 mm Weight: 250 kg Control: R-30iA Mate Number of axles: 6 Axis range: J1 ±370° J2 ±260° J3 ±458° J4 ±400° J5 ±380° J6 ±900°

Description X axis: 3000 mm Y axis: 600 mm Z axis: 1000 mm motors: brushless collet rotation: 0 ° -90 ° press interface: Euromap 12 Robot previously installed on a 220 ton press.

Robot Fanuc M16iB 20 Year of construction: 2005 Arm area: 1667 mm Payload: 20 kg Control: R-J3iB Weight: 270 kg Number of axles: 6 Axis range: J1 ±170° J2 +160° – 90° J3 +290° – 170° J4 ±200° J5 ±140° J6 ±450°

Robot ABB IRB 2400L (2000) Year of construction: 2000 Payload: 7 kg Max arm range: 1800 mm Weight: 380 kg Control: ABB S4C Plus 6 axes Axis range Axis 1 ± 360 degrees Axis 2 ± 200 degrees Axis 3 ± 125 degrees Axis 4 ± 370 degrees 5 axes ± 240 degrees Axis 6 ± 800 degrees equipped with a FRONIUS wire feeder 2 pieces available

Robot Hyundai HS200 Year of construction: 2010 Arm area: 2666mm Control: Hi5-N00 Payload: 200 kg

Robot 6-axis ABB IRB 140 Year of construction: 2005 Control: IRC5

Welding robot ABB IRB 2400L with welding source Fronius Year of construction: 2000 Arm range: 1800 mm Control: ABB S4C Plus Source: Fronius TransPuls Synergic 4000 Fitted with FRONIUS wire feeder Payload: 7 kg Weight: 380 kg 6 axes Axis range Axis 1 ±360 degrees Axis 2 ±200 degrees Axis 3 ± 125 degrees Axis 4 ±370 degrees Axis 5 ±240 degrees Axis 6 ±800 degrees

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Robot 6-axis ABB IRB 2400 Arm range: 1550 mm Control: IRC5 Camera System Evolut Teach pendant Payload: 12 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:210 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1267 kg

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg

welding robot, with 130 kg manipulator; -OSACOM Super 870; welding robots; -Type: IRB-421; -Ser.Nr. L6019 Y117711; -Weight: 130 kg; -Controller; -Type: IRBCX-422; -Ser.Nr. 1 L4459Y 152807; -380 V | 50/60 Hz; -Power: 3 kVA; -Weight: 180 kg; -Welding unit; -Type: E5624; -Ser.Nr. Y2673004; -Overall dimensions; -Width 1,200 mm; -Depth 750 mm; -Height 1,900 mm.

Robot Fanuc R-2000iB/210F (E-25677) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm - total weight approx.:460 kg

Bosch Turbo Scara SR6 Swivel Arm Robot Manafacture: Bosch Order No. 3842999835 Serial No. 3610 773 Tripod length: Console HubQuill 40025 PN. pressure max. 8 bar Load max 8 kg Weight 48.5 kg Swivel range see picture Mounted on aluminium profile base frame. Condition: Used The robots were all in the warehouse of a large automotive supplier as a breakdown replacement machine, so they are they are in very good condition. In addition to about 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. Available. Workshop equipment, workbenches, workshop trolleys, tools, stackers and shelves plentiful A total of 24,000 m² of production space will be dismantled and sold Please also take a look at our other offers.' After purchase, the amount is due within 7 working days. More items - new and used ...

Collaborative robot Cobot Aubo i5 new Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 924mm Year of construction: 2008

KUKA KR200/3 robot mechanics only

Robot Fanuc LR Mate 200iB R-J3iB Control R-J3iB Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 717mm radius Year of construction: 2003

Robot Yaskawa Motoman ES 165N NX100 with Euromap 67 interface Control: NX100 Max. payload: 165 kg Max. working range: approx. 2651 mm

Scara robot Epson G10-851C Control: EPSON RC180 Number of axes: 4 Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm

Scara Staubli TS60 robot Year of construction: 2011 Number of axes: 4 Load capacity: 2.0 kg Reach: 600 mm

Cell with an industrial robot BJB Motoman YR-HP20-A00 6 axes maximum load: 20 kg Reach: 1717 mm Year of construction: 2008

Robot cable ABB 3HAC034295.0 Manip ax1-6/MH ax1-3 cable REV.02 New ! Dimensions (packaging): 800 x 600 x 300 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:905 kg

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

--- Young Used TIG and MIG-MAG systems (demonstration systems, etc.) with only a few welding hours in very good condition. To be delivered directly from the manufacturer at attractive conditions --- LORCH COBOT WELDING PACKAGE: Cobot UR 10 + S5-RoboMIG XT - Collaborative MIG-MAG welding - Welding machine: S5 RoboMIG XT Cobot - Incl. FullProcess: All Lorch SpeedProcesses included SAY GOODBYE TO SKILLS SHORTAGES, COST PRESSURES AND TECHNOLOGICAL GAPS With Lorch Cobot Welding Solutions, you can relieve your employees and increase productivity and profitability by optimizing the use of your human resources. Reduce waste, rework, and costs with consistent performance and reproducible results of the highest quality. Stay future-proof and position yourself as an attractive employer for young, tech-savvy talents with this practical step towards Industry 4.0. REPRODUCIBLE PERFECT ...

Robots - Sepro Success 11 Year of construction: 2019 Location: Lodz, Poland 5-axis robots: 3 axes are driven by servo motors (electric); Axis B (revolution) and movement A Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Robotic industrial cell with BLM Dynamo-E tube bending machine Industrial cell consisting of: automatic bar feeder BLM CRMA7, Industrial robot Fanuc M16IB20, Tube bending machine BLM Dynamo-E year of manufacture 2007, machine number 200016, 2 handle conveyors, with photoelectric control, Resistance welding machine, Constructione Italy, PPN83, machine number QM328001, 2 resistance welders, Constructione Italy PPN83, Donation tape. The whole is fenced with networks controlled by Siemens with CE certification Link to the video – https://youtu.be/y5yYJQhkrRw

Repair Service Reparatur Service Part: Robot Controller Main Board Type: A7780001001 other types on request For MAZAK and MITSUBISHI If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Year of manufacture 2016 With over 40 years of experience, Polymac supplies extraction systems, in-mould labelling systems, handle machines and downstream automation for your pail and lid production. Extraction robot for large pails 10 - 20 litres

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W721 Year of construction: 2006 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W811 Year of construction: 2010 Location: Lodz, Poland 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter and protective housing All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request