We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,095 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
type mechanic: IR364-10 type Control: RC30/51 max. load: 10 kg workingrange: 1.500 mm net weight: 264 kg functional checked!
used
type mechanic: KR150-2 type Control: KRC1 max. load: 150 kg workingrange: 2400 mms repeat accuracy: +/-0.2 mm net weight: 11200 kg It is possible to mount an arm-extension => max. load: 120 kg / workingrange: 2800 mms very good state, functional checked.
used
type mechanic: IRB 6400 2.4-120 M97 type Control: S4C max. load: 120 kg workingrange: 2400 mm net weight: 1870 kg functional checked!
used
Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free ...
used
Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtractio ...
used
KUKA KR16-2 new, 0 hours Year 2010-09 Condition very good Reach 1611mm Weight 235 kg Payload 16kg Control KRC2 ed05 Weight 185 kg Software version V5. 5.14 KUKA KCP ed05 Connecting cable 7 m Availability immediately .
used
KUKA KR30-3 as new first 40 hours TOP condition year 2009 reach 2033 mm weight 635 kg load capacity 30 kg control KRC2 ed05 weight 185 kg software version V5. 5.10 Kuka KCP ed05 connecting cable 7 m availability immediately.
used
KUKA KR16 built in 2006 Condition very good, as good as new only 65 hours of operation Reach 1611mm Weight 235 kg Payload 16kg Control KRC2 ed05 Weight 185 kg Software version V5. 5.10 KUKA KCP ed05 Connecting cable 7 m Availability immediately .
used
KUKA KR6-2 Built in 2003 Reach 1500mm Weight 222 kg Load 6kg Control KRC2 Weight 185kg Software version V4. 1. 7SP08 KUKA KCP2 Connecting cable 7 m Availability immediately .
used
KUKA KR360 control VKRC2 built in 2004 Condition good Reach 2900mm Weight 2245kg Load 360kg Control VKRC2 Weight 185kg Software version V4. 1 7 SP08 KUKA VKCP2 Connection cables 7 m or 15 m Availability immediately several available, preferably in larger quantities .
used
Palletizer Kettner Manufacturer: Kettner Type: Press uni KEG EP - BP Year of construction: 1995
used
type mechanic: KR6-2 type Control: KRC1 max. load: 6 kg workingrange: 1570 mms repeat accuracy: +/-0.1 mm net weight: 222 kg very good state, functional checked. year of construction: 2000
used
type mechanic: KR360L280 Foundry / KRC2 type Control: KRC2 max. load: 280 kg workingrange: 3076 mms repeat accuracy: +/-0.2 mm net weight: 1400 kg very good state, functional checked.
used
-only control (Similar to Fig.) This control only as spare parts carrier is sold due to age. Axles: 6 Control: S4 Type: IRB1400 M94A Load: 5 kg range: 1440 mm Accessories: manual control unit, set of cables Condition: Used, good condition. This control only as spare parts carrier is sold due to age.
used
Linear axis for KUKA KR6/16 KUKA KL1000 CV high Built in 2007 Length 4500mm .
used
Linear axis for KUKA KR15, KR6 Length 2m .
used
Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm
used
Made in Germany
used
KUKA KR360 built in 2004 Reach 2826mm Load 360kg Equity Wicht 2350 kg KUKA control VKRC2 (VW/Audi version) Weight 185kg Software V4. 1. 7SP08 (standard software) KUKA KCP2 KUKA set .
used
Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good
used
Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good
used
Industrial robots, robots -Payload: 2 kg -Control: Siemens RCM -Max. Working range: 800 mm -Own weight: 670 kg
used
Robotic storage station Manufacturer: Stäubli Type: MPS360 Built in 2006 Height: 1500 mm Number 4
used
Axles: 6 Type: S3Q883-1-1 Load: 3kg Range: 677mm Year of construction: 2004 Condition: used spare parts carrier Accessories: Cable, handheld MCP 4, control, adept CIP 2
used
2 welding robots MOTOMAN NX100 with rotary table Built: 2006 Max payload: 165 kg Max arm area: - 2651 mm (on the axis from the vertical surface to the machine frame) - 3372 mm (on the axis from the paral alarea to the machine frame)
used
Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160
used
Two little used Fanuc robots with tools and R-J2 controller. Working condition disabled from use. We can check hour counters. For example spareparts or use.
used
?4400mm Laser cutting head PRECITEC Laser welding head TRUMPF BEO D70 RobotStudio Software included
used
The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2015 (Multiple options available) Reach in mm-3200 mm Payload-130 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find for you Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.
used
The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2009 Reach in mm-2800 mm Payload-185 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.
used
The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. With a focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Year: 2009 Reach in mm-2550 mm Payload-180 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included Please contact us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-3 COMP Condition: USED Year: 2011 Reach in mm-2400 mm Payload-200 kg Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant Not Included: Externals on the manipulator, Gripper and the Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.
used
Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 L170-2 COMP Condition: Used and tested Year: 2007 Reach in mm-2600 mm Payload-170 kg Controller: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant Not Included in the Price: 7th Axis and 7th Drive but can be offered with extra pricing, engineering consultancy, VAT, Shipment and custom duties As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your production need
used
REFURBISHED KRC2 ed05 KR210-2 2000 & NEW MEGMEET ARC WELDING SET Model: KR150 L130 Condition: Refurbished with 1 year of warranty Welding Machine: NEW Megmeet Welding Machine FK4000-R + Arc Welding Gun Year: 2005 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + Arc Welding Set Not Included: 7th Axis and 7th Drive is not included in the price but can be offered with extra pricing, engineering consultancy As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific welding needs.
KRC4 KR60 (L30) & KL 1000/2 LINEAR TRACK Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 (L30) HA Pay Load: 30kg or 60kg Bjjjxatspmq Arm Reach: 2033kg or 2429kg Condition: USED Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 8m Linear Track Not Included: Gripper Linear Track Model: KL 1000/2 Year: 2013 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.
used
Brand: KUKA Model: KR210 Year: 2004 Access Range: 2700mm Loading Capacity: 210kg Status: USED and TESTED Includes: KR210 Manipulator, KRC2 Controller Panel, KCP2 Teach Pendant, Wire Sets Payment Conditions: %100 advance payment before shipping. Shipping, shipping insurance, customs fess and VAT are not included to price.
used
Brand: YASKAWA Model: YR-UP165-A30 Year: 2000 Access Range: 2650mm Loading Capacity: 100kg Status: USED and NOT TESTED Includes: YR-UP165-A30 Manipulator, XRC Controller Panel Warranty: 1 month valid for spare parts Payment Conditions: %100 advance payment before shipping. Shipping, shipping insurance, customs fess and VAT are not included to price.
used
As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + 2 Spindle Motors ( Set with Mechanical System ) + Electrical Panels + 2 Servo Drives + Cable Set + 8 DI / 8 DO Shipping: NOT included in the price Payment: 100% payment prior to collection
used
As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection
Description X-axis: 500 mm Y axis: 1800 mm Z: 1100 mm engines: BRUSHELESS caliper: present
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.