140,787 used machines on RESALE, but how to find them? Machine Search
capacity per roll unit: 1,250 kg; total capacity set: 2,500 kg; workpiece diameter: 182–3,221 mm; rotation speed: 111–2,800 mm/min; torque: 278 Nm at 50 Hz; motor power: 0.18 kW, wired remote control, weight: 180 kg Auction-ID: A1-41281-21
Includes welding cable and welding torch, portable Auction-ID: A1-41281-267
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm Accessories: Accessories: - 6 x Pipe-bend clamp, nitrided - 12 x Quick-release locking pin (without groove), double-burnished - 6 x Universal stop 150 L, nitrided - 2 x Universal stop 225 L, nitrided - 2 x Universal stop 325 L, nitrided - 4 x Stop and clamping square 175 L, nitrided - 2 x Stop and clamping square 300 G, nitrided - 1 x Accessory set - ...
Multi-Process Welding Machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-400 amps duty cycle: 100% duty cycle at 221 Amps Equipped with: LCD color display Equipped with: wire feed unit Includes: MIG/MAG torch Includes: MMA torch Includes: TIG torch Including: ground cable Includes: Electronic gas regulator Connection: 380 volts (plug not included) Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A1-51368-70
table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Product description: Siegmund retro offer incl. accessories: < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >> - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) Accessories: - 6 x Pipe-bend clamp, nitrided - 12 x Quick-release locking pin (without groove), double-burnished - 6 x Universal stop 150 L, nitrided - 2 x Universal stop 225 L, nitrided - 2 x Universal stop 325 L, nitrided - 4 x Stop and clamping square 175 L, nitrided - 2 x Stop and clamping square 300 G, nitrided - 1 x ...
Multi-Process Welding Machine Functions: AUTO, MIG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 30% 350A • 60% 250 A • 100% 200 A Equipped with: LCD color display Includes: MIG/MAG torch Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Languages: English, German, Dutch, French, Russian Including: manual Condition: unused, in the original packaging Auction-ID: A1-51368-258
Multi-Process Welding Machine Functions: AUTO, MIG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 30% 350A • 60% 250 A • 100% 200 A Equipped with: LCD color display Includes: MIG/MAG torch Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Languages: English, German, Dutch, French, Russian Including: manual Condition: unused, in the original packaging Auction-ID: A3-46110-1333
Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40333-129
Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32 Auction-ID: A1-40333-133
In working order, allow 25€ for loading Sell industrial grade spot welding machine from the brand TECNA, model 3481. Ideal for automotive body shop, sheet metal work or restoration of vintage vehicles. Auction-ID: A3-46110-30926
Technical data Manufacturer: HILBIG Type: ELOTOP 810 Stud welding with ceramic ring – welding range Ø: 3–12 mm Short-term stud welding – welding range Ø: 3–8 mm Shielded stud welding – welding range Ø: 3–10 mm Max. current: 800 A Current setting range infinitely variable: 50–750 A Time setting range infinitely variable: 20–600 ms Max. bolts/min. at Ø 3 mm: 32 Max. bolts/min. at Ø 12 mm: 3 Mains connection 50/60 Hz, three-phase current: 230/400 V Power plug at 400 V: 32 A Power cord four-core at 400 V: 5/4 mm² Permissible power cord extension at 400 V: 50 m Mains fuse slow at 230/400 V: 35/25 A Mains input power at ...% ED: 1.4/3.2/100 kVA or 55/38/7 kVA Max. welding cable length at ... A welding current and specified cross-section: 600 / 25 m at 70 mm² Mains voltage tolerance: -15% / +6% Degree of protection: IP 23 Cooling Type: F Housing dime ...
This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40333-138
Equipped with exhaust motor, filter and wall brackets. Auction-ID: A1-47367-107
Offer 24014 Technical data: - Rated power at 50% ED 40 kVA - Max welding power 118 kVA - Adjustable projection 225 - 550 mm - Welding values - sheet steel 4 + 4 mm - Brass sheet 2 + 2 mm - Aluminium sheet 1 + 1 mm - Electrode force adjustable 65 - 390 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Control for: Retention time; Current time; - Holding + holding time, and - Pulse + pause time - Drive 380 V - Space requirement approx. W 600 x H 1350 x D 1550 mm - Weight approx. 330 kg - with: - complete electrical + pneumatic equipment - 6-time synchronous control MPS 1036 - Foot switch
One semi new EVG ATT mesh welding line Flexible welding line for the production of standard and special reinforcement panels, from small batches up to large production runs Automatic feeding of longitudinal and transverse wires from coils via synchronised multi-track RA-XE-type rotor straightening lines with single or double wire feeding, equipped with up to 10 rotors Automatic feeding of the cross-wires from rolls via a multiple-needle system specific to the equipment Producción «just in time» de distintos tipos y geometrías de paneles High production speed combined with short changeover times No need to flip panels, as the cross-wires are fed and welded either above or below the longitudinal wires
With wire feeder. Control board is missing. Auction-ID: A1-51529-65
1 control MS1000. Auction-ID: A1-51529-142
With vise attached, manufacturer: Matador. Auction-ID: A1-51529-75
Power: 0.75 kW. Auction-ID: A1-51529-112
Manufacturer: Scheld. Type: DT300. Year of manufacture: 2009. Serial number: 090334. Auction-ID: A1-51529-70
With wire feeder. WITHOUT gas bottle. Auction-ID: A1-51529-124
New control system, HiE accent T-2000. Auction-ID: A1-51529-103
With nut feeder Winkhaus, serial number 48011, year of construction: 1999, weight: 150kg. Auction-ID: A1-51529-105
Cooler Type: Cool82 U44. Feed Case Type: M Drive 4 ROB 5HW XR Li. Auction-ID: A1-51529-117
Cooler Type: Cool82 U44. Feed Case Type: M Drive 4 ROB 2X. Auction-ID: A1-51529-116
Welding Table Type: Welding table Finish: Anti-corrosion paint or powder-coated finish Flatness: ≤ 0.2 mm/m Hole diameter: Ø 14 mm – 22 mm (depending on model) Standard spacing: Square grid (e.g. 100 mm x 100 mm) or rectangular pattern Maximum evenly distributed load: approx. 1,500 kg – 3,000 kg or higher Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-88
MILLER SYNCROWAVE 300 – AC/DC TIG Welding Machine Manufacturer: Miller Electric Model: Syncrowave 300 Machine Type: Industrial TIG / Stick Welding Power Source Condition: Used Technical Specifications Description Specification Brand Miller Model Syncrowave 300 Welding Processes TIG (GTAW) / Stick (SMAW) Welding Current Type AC / DC Maximum Welding Current 375 A indicated on control scale Current Adjustment Continuously Adjustable AC Balance Control Adjustable Pulse Welding Integrated Pulser Pulse Frequency Adjustable Background Current Adjustable Pulse On-Time Adjustable Post-Flow Gas Timer Adjustable, up to 60 seconds Crater Fill Control Integrated Arc Starting High-Frequency Start Amperage Control Panel / Remote Polarity Selection AC / DC / DC Reverse Current Display Analog Ammeter Voltage Display Analog Voltmeter Cooling Ventilated Power Source Main Features - AC/DC TIG welding - S ...
Manufacturer: PH-Maschinenbau. Type: PH-SO-II-G160. Year of manufacture: 1999. Power: 2.3 kW. Connection: 230V. Auction-ID: A1-51529-69
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-51257-451
Included: Extraction arm Auction-ID: A1-51523-53
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-641
Maximum welding capacity: 107 kVA, cooling water volume: 4l/min Auction-ID: A1-51523-13
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-620
Voltage 220V +-15% ; 10-130A current range; 25% duty cycle (25c) IP21S; breasts and welding hood; Inverter MMA welding machine; 25% 130A 25.2V ; 60% 84A 23.4V; 100% 65A 22.6V; fan cool; Auction-ID: A1-51257-619
Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485; Auction-ID: A1-51257-450
height adjustable legs; Blade height 785mm; drawer size inside 490x440mm; Auction-ID: A1-51257-378
Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-51257-622
6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose ass ...
Flow volume: 1200 m3/h. Auction-ID: A1-42990-57
maximum number of results exceeded
please refine your search
100 € 
