140,760 used machines on RESALE, but how to find them? Machine Search
Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Total height: 1200 mm Tubing height: 2000 mm
Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm
ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...
Offer 26140 Technical data: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 300 mm
Equipment: integrated Leica 16x/14B binocular microscope with 6.8 eyepieces, protective viewing window, digital panel, emergency stop button, key switch, status indicator LED displays, two integrated gas pressure gauges with brass connections and hoses. With Rofin Sinar laser, voltage: 230V, PE, frequency: 50Hz, max. current consumption: 16A, laser safety class: 4, the laser requires new flash lamps. An inspection on site is possible.
Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system
Working range Mesh width (cross-wire length) max. 1,500 – 3,080 mm Distance between the outermost longitudinal wires max. 2,750 mm Number of longitudinal wires, depending on configuration max. 64 Longitudinal wire spacing, fixed 50 mm with single bars and 100, 150, 200mm with double wire Longitudinal wire diameter: a. 4.0 – 12.0 mm single wire and B. 4.0 – 9.0 mm Double Wire Cross-wire spacing min. 40 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0–12.0 mm Mesh length: up to 14.000mm
This used SCHLATTER MG line was specially developed for the economical production of light and heavy standard bearing mats in medium and large series. The line wires are drawn directly from spools, while the cross wires are precisely straightened, cut to length and fed into the welding system from a large magazine. This concept enables fast changeover times and ensures maximum flexibility – a clear advantage when tapping into new markets. On request, and for an additional charge, the relevant straightening machines for the cross wires are available, as well as a comprehensive range of accessories, spare parts and a wear parts pack.
Bodor AQU3000 Handheld Laser Welding Machine – 3000 W For sale is a Bodor AQU3000 laser welding machine with 3000 watts of laser power. The device is located in Germany and is available immediately – no long delivery times or waiting times for an import. The welding machine is still in its original packaging. The AQU3000 combines welding, cutting and, if necessary, cleaning in one compact system. Modern fiber laser technology achieves high-quality weld seams with low distortion and significantly reduced post-processing effort. Compared to classic MIG and TIG methods, significantly higher working speeds are possible. Technical data: Manufacturer: Bodor Model: AQU3000 Laser power: 3000W Fiber cable length: 10m Operating voltage: 380 V Cooling: Water cooling Welding thickness mild steel: up to 8 mm Welding thickness stainless steel: up to 8 mm Cutting fun ...
current intensivity: 1,2 / 0,5 A wire dia.: 0,8 - 1,6 mm IP protection class: IP 43 dimensions: 250x210x190 mm speed: 1 - 25 m/min weight: ca.7,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible.
Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details.
A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible.
Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch
Technical Specifications & Performance Data This automatic shrink wrapper with welding bar is engineered for reliable multi-row collation and high-quality bundling in beverage production and broader industrial packaging environments. Designed for in-line or 90° infeeds, it handles film-only multipacks as well as packs on a flat pad or tray when configured accordingly, making it ideal downstream of filling, capping, labeling, and rinsing stations. Type: Automatic shrink wrapper with welding bar Condition: NEW Output: Up to 25 bundles/minute (format-dependent) Infeed: In-line or 90° multi-row collation conveyor Film: PE shrink film, plain or printed with register mark alignment Packaging styles: Film-only bundles; optional flat pad or tray capability (configuration dependent) Welding bar: Available with multiple bar widths to match bundle size range Electrical: 50 Hz Dimensions (W x L x ...
Friction Stir Welding Machine SW BA312, Year of Build 2022, Machine No. 2320024, with tool holder HSK 63
Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox Type -Translation: 1:, 1: -Input shaft: Ø mm -Output shaft: Ø mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg
Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø mm -Output shaft: Ø mm -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg
A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment.
used
Zelfuitlijnende lasrolstelling één aangedreven eenheid één niet-aangedreven eenheid minimale/maximale werkstukdiameter: 500/4500 mm snelheid: 70 gt; 1200 mm/min vermogen: 2 kW - 15,8 ampère WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 20 ton Number of wheels: 8 wheels Coating material on wheels: rubber
Offer 19370 Technical data: - Volume flow approx. 1447 m³/h. - Negative pressure 2200 Pa - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Required space W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg
table length: ? mm table width: ? mm table height: ? mm total power requirement: 1,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 3,51,61,5 m Set of welding stations (6 pieces) + suction unit Shipping - Dimensions: 6 welding tables 3 Euro pallets Extraction unit approx. 1.6 x 0.8 x 1.5 m on Euro pallet Total weight estimated approx. 750 kg. 6 welding stations / tables + suction unit Drive: 1.2 Extraction with 1.78 m³ / s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details.
: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...
A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment.
Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table load: max. 40 t t with manual operation panel: ja weight of the machine ca.: 22 t : 1918 Year: ca. 1990 Control: Dimensions (L/W/H): 3500 x 2300 x 2400 mm Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: JÄCKEL MIG 405 output: 400 AP : water cooling unit: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: GoodAire 1800 output: 1.800 cbm/Stunde weight of the machine ca.: 200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref.nr. 00917 Name of the system: Spot welding machine Application: Sheet steel processing, metal construction, series production and welding technology Manufacturer: Dalex Model PMS 14 - 4 Year of construction unknown DALEX, spot welding -200 KvA 50Hz 400V Technical data: Make: DALEX Type: PMS 14-4 Process: Resistance spot welding Rated power: 200 kVA Max. power: 623 kVA Projection: 500 mm Electrode force: 80 – 1,200 daN Weight: 700 kg Condition under power Can also be demonstrated
current capacity: 8,0 kVA throat: 80 - 480 mm contact pressure capacity: 17 - 235 daN horn spacing: 140 mm mm rated capacity: 8,0 kVA voltage: 380 V total power requirement: 17,8 kVA weight of the machine ca.: 77,5 kg dimensions of the machine ca.: 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tool adaptor: . weight: . kg material: . Recordings made by Hertel, Komet, etc. Approx. 29 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zinser P10F Spot Welder / Resistance Welding Machine For sale is a robust spot welder of the Zinser brand, type P10F. The machine comes from industrial use and convinces with its solid construction and proven, durable technology. Ideally suited for workshops, metal construction, sheet metal processing, repair work and use in production. Technical data: • Manufacturer: ZINSER • Type: P10F • Type: Spot welding machine / resistance welding machine • Design: stationary industrial construction • Power supply: [please add nameplate] • Power: [please add nameplate] • Year of manufacture: [add if known] Equipment: • Robust mechanical design • Adjustable welding performance • Suitable for various sheet metal and steel joints • Durable industrial technology • Solid construction for daily workshop use Condition: The machine is in a used cond ...
Heinz Soyer BMK 850 Stud Welding Machine / Stud Welding Machine with Stroke Ignition For sale is a robust Heinz Soyer BMK 850 stud welding system with stroke ignition. The system originates from industrial use and is suitable for professional stud welding in metal and steel construction as well as for workshop and production work. The robust transformer technology and the high welding power of up to 900 A enable the welding of larger bolts. According to the nameplate, the system is designed for up to 3 M12 bolts per minute. Technical data: Manufacturer: Heinz Soyer Bolt Welding Technology GmbH Device: Stud welding machine "Stroke ignition" SC Type: BMK 850 Production number / year of manufacture: 124-00495 Mains connection: 3 × 380 V / 32 A Transformer rated power: 8 kVA Nominal welding current: max. 900 A Open circuit voltage: 76 V Continuous E-current: 1.7 A/phase ...
A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible.
MIG-MAG Welding Machine Messer Griesheim Euromag 50 to 500 Ampere with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 80 - 500 A. Welding voltage MIG 18 - 39 V. Max. welding current at: 60%ED 500 A. Max. welding current at: 100%ED 380 A. Water cooling. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim / EWM Euromag 50 to 500 Ampere – Shielded Gas Welding Machine - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
MIG-MAG welding machine EIC CVR 400-2 + wire feeder WFG 142. Manufacturer EIC (also distributed by CEBORA Cebotech). Power at 60% ED: 400 A / 34 V and power at 100% ED: 310 A / 31 V. MIG/MAG welding system with water cooling unit and WFG 142 wire feeder case. Shielded gas welding machine with connecting hose package, welding hose package with MIG-MAG welding torch, ground cable, wire roll 1.2 mm. Without gas cylinder.
MIG-MAG Welding Machine Knife Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. Without wheels. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
MIG-MAG Welding Machine EWM Messer Griesheim VARIOMIG 600-2 Welding current up to 600 amps with EWM WEGA Drive4 wire feeder case. Manufacturer: Messer Griesheim / EWM. Made in Germany. Welding current 100- 600 A. Welding voltage MIG 19 - 40 V. Max. welding current at: 60%ED 600 A. Max. welding current at: 100%ED 450 A. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG-MAG Welding Machine Messer Griesheim VARIOMIG 600-2 / EWM WEGA Drive4 – Shielded Gas Welding Machine Welding Current up to 600 Ampere - MIG/MAG Welding Machine – Welding Power Source - MIG MAG Power Source
TIG-TIG Welding Machine Oerlikon DTW 251 A The device is untested. A suitable hose package is missing. The Oerlikon TIG welding hose shown does not have the correct connections, an adapter is missing (TIG connection adapter for the old Oerlikon central connection) Manufacturer: Oerlikon Schweißtechnik GmbH, Eisenberg/Palatinate. Made in Germany. Technical data: Mains connection 380 volts. Welding range 5 - 250 amps. Welding performance: 250 A / 20 V at 60% ED. 200 A / 28 V at 100% ED. Water cooling. High-frequency ignition (HF). Pulse welding function to minimize warping. Adjustable lowering current (crater fill flow). Also suitable for welding with rod electrodes. Condition & Scope of Delivery: Attention: Oerlikon TIG adapter is missing. Oerlikon hose package (not suitable!), TIG welding torches, remote control, and ground cables. Without gas bottle. ...
Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Ess, MIG-MAG shielded gas welding machine -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg
Welding machine Fabr. Migatronic Typ. Automig 273
volume capacity: - m³ / h total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90.0 Grad turning speeds: 0.2 - 2.5 U/min bore: 90.0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90.0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece dia.: 2-10 mm material: rust free/heat resistant steel: / welding process: 15-20 bolts /min at: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 530 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 22 mm weight: 740 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm Side panel height: 200 mm work height max.: 850 mm weight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding - Side panel holes in diagonal grid - Corners, edges and drill holes chamfered 45° - Construction reinforced with ribs - incl. basic foot equipment (working height 850 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
