robot kuka used for sale

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible.

Manufacturer: Servent Model: OTC-IRB-AX-V 6 L Year of Manufacture: 2006 Machine Type : Welding robot System type: Robotic MIG/MAG welding system MIG/MAG power source: OTC DP 400 Positioners: 2 x S40.1-4 / 1000 kg Linear track with gantry: S80.1-4 / S70.1 Travel length: 8000 mm Electrical connection: 3/N/PE, 400 VAC, 50 Hz, 100 A CE marked System configuration: - Overhead-mounted 6-axis robotic arm on 8 m linear track - Robot controller: OTC Daihen - Control software upgraded from AX-C to AX-2 - 2 welding stations - Each station equipped with 1-axis positioner - Positioner load capacity: 1000 kg - Positioner torque: 1000 Nm Welding equipment: - Power source: OTC DP 500 - Duty cycle: 100% at 350 A - Duty cycle: 60% at 500 A - Push-pull welding torch - Water-cooled gas nozzle - Wire feeding via roller liner - Torch alignment gauge included Sensors and automation: - Touch sen ...

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg

Inv. Num. : 8913 Type: IRB 1600/1.45-8/M200 Producer: ABB Created: 2013 Parameters: Maximum arm reach: 1450 mm Number of axles: 6 pieces Maximum load capacity: 8 kg Machine weight: 250 kg

Hello I offer an ABB IRB 6700-245/3.00 robot from 2018 for sale here. Sale against bid. Robot complete with controller and teach pendant.

Reconditioned 5 axis robot CMA mod. ROBY 5EX-G - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

This FANUC ARC Mate OiB robot arm was manufactured in 2015. It features a maximum load capacity of 3kg. Consider the opportunity to buy this FANUC ARC Mate OiB robot arm. Contact us for more information.

industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v year of manufacture: 2008/06 Weight: 100kg

This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information.

This OMRON Quattro 800HS with Platform P30 robot arm was manufactured in 2021. It is designed for precise and rapid handling tasks in various industrial applications. Contact us for more information.

This KOVACO SP 50 DP was manufactured in 2015. It features a robust welding positioner with a table size of 1200x1800 mm and a capacity of 5000 kg. The stroke reaches up to 1200 mm, and it offers a tilt range of 0-90 degrees and full table rotation from 0-360 degrees. Consider the opportunity to buy this KOVACO SP 50 DP welding robot. Contact us for more information about this machine.

This 6-axis STAUBLI RX90B robot arm was manufactured in 2003. Ideal for automation tasks, it offers precision and flexibility in a variety of industrial applications. Consider the opportunity to buy this STAUBLI RX90B robot arm. Contact us for more information about this machine.

This STAUBLI TX2-160 LHE was manufactured in 2023. A robust robot arm, ideal for precise and efficient automation tasks. Contact us for more information about this machine.

This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information.

This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine.

This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 kVA. It meets CE, EMC, and EN55011 (Group 1, Class A) safety certifications. Consider the opportunity to buy this FANUC LR Mate 200 iD 14L robot arm. Contact us for more information about this machine.

This 6-axis ABB IRB 4400 robot arm was manufactured in 2018. Ideal for automation tasks, it offers flexibility and precision in a variety of industrial applications. Consider the opportunity to buy this ABB IRB 4400 robot arm. Contact us for more information.

This 6-axis ABB IRB 2400 M2004 robot arm was manufactured in 2007. It features a maximum handling weight of 10 kg and an impressive reach of 1.55 meters, with a total weight of 380 kg. If you are looking to get high-quality automation capabilities, consider the ABB IRB 2400 M2004 machine we have for sale. Contact us for more information.

This STAUBLI TX60 robot arm was manufactured in 2016. It is in very good condition, almost like new, with only 344 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information.

This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.

This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robots joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information.

This 6-axis COMAU C3G robot arm was manufactured in 2000. It features a weight of 890kg and includes two units: one operational and one for parts. Ideal for complex automation tasks. Contact us for more information about this machine.

This RETHINK sawyer robot was manufactured in 2018. It features a maximum reach of 1260 mm and a gantry reach of 900 mm, with a typical tool speed of 1.5 m/s and a payload capacity of 4 kg. Ideal for a variety of automation tasks, the sawyer robot we have for sale offers advanced flexibility. Contact us for further details regarding this robot.

This 6-axis FANUC R2000iB/165F robot arm was manufactured in 2013. Ideal for automation tasks, it enhances precision and efficiency in production lines. Consider the opportunity to buy this FANUC R2000iB/165F robot arm. Contact us for more information.

This 4-axis EPSON LS3-401S robot arm was manufactured in 2018. It features a maximum operating speed of 6000 mm/s for joints #1 and #2, and a payload capacity up to 3 kg. Ideal for tasks requiring high speed and precision, it operates efficiently with a standard cycle time of 0.42 seconds. Consider the opportunity to buy this EPSON LS3-401S robot arm. Contact us for more information about this machine.

This DENSO RC8A was manufactured in 2018. It features a robotic cell with two SCARA robots, each capable of a maximum reach of 550 mm and a Z-axis stroke of 320 mm. The system includes a controller RC8A, offline programming software, and self-diagnostic functions. Ideal for applications requiring high-speed robotic manipulation. Contact us for more information about this machine.

This 6-axis COMAU C4G RCC3 robot arm was manufactured in 2004. Consider the opportunity to buy this COMAU C4G RCC3 robot arm. Contact us for more information.

This 6-axis FANUC M-16iB robot arm was manufactured in 2005. Ideal for automation tasks, it enhances precision and efficiency in operations. Consider the opportunity to buy this FANUC M-16iB robot arm. Contact us for more information.

This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information.

This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine.

This 6-axis STAUBLI RX160 L robot arm was manufactured in 2017. It features a maximum load capacity of 28 kg and a reach of up to 2010 mm. Equipped with a CS8C-RX160 controller and a robot stand, it offers high flexibility with motion ranges up to ±270° on several axes and speeds reaching 870°/s on Axis 6. Ideal for tasks requiring precision and range. Contact us for more information about this machine.

This 5-axis OTC Daihen NH52-NEFC robot arm was manufactured in 2018. Ideal for complex welding tasks, it offers precision and flexibility in various applications. Consider the opportunity to buy this OTC Daihen NH52-NEFC robot arm. Contact us for more information.

This 6-axis Yaskawa Motoman ArcWorld was manufactured in 2014. Ideal for versatile setups, it features a maximum load capacity of 6kg and a working range of 1440mm. A great addition to any production line, the Yaskawa Motoman ArcWorld robot we have for sale is a robust choice. Contact us for further details regarding this automation equipment.

This ABB IRB 4600-45/2.05 was manufactured in 2023. Its a robot arm with a payload capacity of 45 kg and a net weight of 445 kg. This unit is new and never used, with three pieces available. Contact us for more information about this machine.

This 6-axis FANUC M-6iB robot arm was manufactured in 2007, featuring a robust design with a 380-415V power supply, digital servo function, and password protection. It includes a handling tool, basic software, and a CE sign option. Ideal for automation tasks requiring precision and reliability. If you are looking to get high-quality automation capabilities consider the FANUC M-6iB machine we have for sale. Contact us for more information about this machine.

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

This 4-axis EPSON LS6-602S robot arm was manufactured in 2018. It features a 600 mm arm length and can handle payloads up to 8 kg. With speeds reaching 6800 mm/s on joints #1 and #2, and 1100 mm/s on joint #3, it ensures rapid and precise movements. Weighing only 17 kg, its designed for table mounting and includes a 15-pin D-sub electrical connection. Consider the opportunity to buy this EPSON LS6-602S robot arm. Contact us for more information.

This 6-axis ABB IRB 140 M2000 robot arm was manufactured in 2005. It is designed for flexible use in manufacturing facilities, featuring an open structure that easily adapts and communicates with external systems. Weighing 98kg, it operates quietly with noise emissions under 70 dB(A). Consider the opportunity to buy this ABB IRB 140 M2000 robot arm. Contact us for more information about this machine.

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

A Fanuc robot that was mounted on an injection molding machine is available. Axes: 6, payload: 3kg, reach: 700mm, repeatability: +/-0.04mm, control system: Fanuc System R-J3, weight: approx. 180kg, operating hours: approx. 80000. Including control cabinet and operator panel. Documentation available. On-site inspection is possible.

Five identical industrial robots are available, number of axes: 4, reach: 3139mm, payload: 250kg, weight: 1.45t. With control system, no known defects. An on-site inspection is possible, not under power.

This 6-axis Reis SRV 130 robot arm was manufactured in 2008. Ideal for complex automation tasks, it offers flexibility and precision in operations. If you are looking to get high-quality automation capabilities, consider the Reis SRV 130 machine we have for sale. Contact us for more information.

This 6-axis IGM RT330K4 was manufactured in 1998. It includes a rotary tilting table, control cabinet, and a K4 programming console, making it ideal for complex automation tasks. If you are looking to get high-quality automation capabilities consider the IGM RT330K4 machine we have for sale. Contact us for more information.

Manufacturer: ABB Model: IRB 1200-7/0.9 Omicore Warranty until 23.09.2026 Reach 901 mm Load capacity 7 kg Additional arm load 0.5 kg Axles 6 Robot controller: Omicore C30 Position repeatability: 0.013 mm Cycle time 7 kg version 1 kg pick & place cycle 25 x 300 x 25 mm: 0.4 s Maximum TCP speed: 7.3 m/s Max. TCP acceleration: 35 m/s² Acceleration time: 0 –1 m/s 0.06 s Robot footprint: 210 x 210 mm Weight: 54 kg MANIPULATOR - Manipulator variant: IRB 1200-7/0.9 - Manipulator color: ABB Graphite White std - Manipulator protection: Base 40 - Robot cabling: From the base side STEERING - Control variant: OmniCore C30 - Control Housing: Base - inch rack mounting kit: Yes - Operating temperature: max. 45 °C - Mains voltage: 220–230 V AC +10%/-15% - Connected Services: Wired LAN - Ethernet Switch: 5-port Ethernet switch - Additional logic 24 V power supply: 24 V, 8 A - Fle ...

This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robots footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine.

This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, its ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine.

Robot cell including safety enclosure and light curtain 6-axis robot HYUNDAI HH020 Transfer weight/free payload 13 kg Matrix version, material supply using matrices We currently have 2x SherpaLoader 20 in stock, e.g. built in 2018, approx. 7,500 operating hours (of which >70% is waiting time in front of the machine for the next loading request). Component dimensions Ø10 – 200 mm, length 10 – 200 mm; effective payload up to 13 kg, raw parts are supplied to this system via grid matrices. Before sale, the system will be serviced with - Software update for master control and HMI - Gear grease change on axes 1 - 6 - Encoder battery replacement on axes 1–6 and mainboard - Replacement of all energy chain cables on axes 3–6 Find more here - / Contact us at -

This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine.