129,200 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Stäubli Model: RX160 Year of Manufacture: 2018 Type of Machine: Operating Hours: 500 h Mass: 248 kg / 546 lb Nominal Payload: 20 kg / 44 lb Robot Arm Specifications: - Model: RX160 (Series 160) - Configuration: 6-axis - Mounting: Floor-mounted - Arm Length: Standard - Color: Standard RAL 1028 (Melon Yellow), textured paint, satin finish - Integrated: Two solenoid valves for compressed air - Lubrication: H1 Food Grade Oil - Mechanical limit on Axis 1 - Brake selector switch with 5 m cable to separate box Controller: - Model: CS8C - VAL3 Controller - Operating System: SRC Version 7.x - Version: Built-in (IP20) - Power Supply: MULTI 3x400V, 50/60 Hz - Cooling: Standard cooling with airflow from bottom to top Cabling & Connections: - 15 m robot connection cable, double pluggable (arm + controller) - Angled outlet plug on the arm (right side) - Side connection at th ...
KAWASAKI RA006L robotic welding station is used for precision welding of workpieces using the MIG/MAG method. The station, equipped with two independent welding tables, is protected from the inside with SICK safety curtains and from the outside with double doors with safety locks. Next to each door is a control panel, with a safety switch and other necessary buttons. The welding station is complete and consists of the following parts: – robot arm: KAWASAKI RA06L – controller: KAWASAKI E controller E40 – MIG/MAG welder: KEMPPI KempArc SYN 300 – wire feeder: KEMPPI KempArc DT400 – manual welding table 2×1 m (2 pcs.) – safety curtains: SICK – cooling device: KEMPPI KempCool 10 – cleaning station: ABICOR BINZEL BRS-CC – KEMPPI and ABRICOR BINZEL welding accessories – anti-blinding shields – inductive sensors: SICK – door bolts and stops: SICK – cont ...
Two used GEA MIone Milking robot with equipments More details contact with us
Inv. Num. : 8310 Type: S8 Robo Mig XT Producer: Lorch Generated: Parameters: Maximum arm reach: 1951 mm Number of axles: 6 pieces Maximum load capacity: 5/10 kg Robot travel: 4700 mm Application A: 2251 mm Areas of application B: 1951 mm Areas of application C: 49 mm Areas of application D: 1257 mm Areas of application E: 986 mm Equipment: Technical documentation Parts of the workplace: Comau Arc Robot 4.5.1945 Lorch S8 Robo Mig XT Welding Machine Anti-collision device Burner cleaning station 2 orbital positioning stages Horizontal Positioning Table Gudel Travel System Switchboard SAFETY safety system
FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...
Inv. Num. : 8354 Type: SP100X Producer: MOTOMAN Created: 2001 Parameters: Load capacity: 100 kg Robot reach: 3291 mm Base height: 1330 mm Equipment: Schmalz Gripper XRC Controller
Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...
Inv. Num. : 8389 Type: 2x ABB IRB 2400L Producer: Robolution Created: 2006 Parameters: Control system: IRC5 Door height: 2800 mm Door opening: 2800 x 2200 mm Machine weight: 5500 kg Height: 2200/3100 mm Width: 3750 mm Length: 5700 mm Equipment: Touch Screen The robot cell consists of: 2x ABB IRB 2400L Robot 2 x lathe (robot welding on one side of the table and the operator loads the material on the other side of the table) Welding power sources: 2x Fronius TPS 4000 Equipment for welding wires with diameters of 1 and 1.2 mm Burner
For one of our customers in parquet production, we completed and commissioned a complete palletizing system including wrapper. The system ensures efficient, safe and fully automatic palletizing of the finished parquet packages – from stacking to transport securing with stretch film. With well thought-out conveyor technology, robust design and simple operation, the line offers maximum reliability in daily use.
A total of 17 robots and 4x axes (7-axes) in mint condition and in their original packaging are available. 1) 1x industrial robot ABB IRB 6700-300/2.70, year of manufacture: 2023. 2) 7x industrial robots ABB IRB 7600-340/2.80, year of manufacture: 2023. 3) 9x industrial robots ABB IRB 4600-20/2.50, year of manufacture: 2023. 4) 4x 7-axis ABB IRBT 7004 and IRBT 4600 for IRB 7600 and IRB 4600. Documentation available. On-site inspection is possible. Individual sale is possible.
CONTROLS CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available
An automatic Lorch welding machine including vacuum pump and traverse is available. Current: 230V, power: 100W, min. material thickness: 5mm, vertical/horizontal pulling force: 150N/350N, vertical/horizontal speed: 1100mm/min/1200mm/min, machine dimensions X/Y/Z: approx. 450mm/670mm/370mm, weight: approx. 25kg. Documentation available. On-site inspection is possible.
Two identical Yaskawa robots are available for the welding process. Payload: 6kg, reach: approx. 1350mm, axes: 6, repeat accuracy: +/-0.08mm, weight: approx. 130kg. An on-site inspection is possible.
Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.
Robot - Sepro Multi Inject 20 Year of manufacture: 2018 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-4000, Y-1200, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robot - Sepro Multi Inject MI-30 Year of Make: 2016 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travels in axes approx.: X-4500, Y-1200, Z-2000 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robot - Sepro SR Multi Inject 20 S3 Trans Year of Make: 2014 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-4000, Y-1200, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robots - Wittmann W843 Year of Make: 2014 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric): X, Y (telescopic), Z, B; Axis B (rotation), axis C - pneumatic Traversing in axes: X-1200, Y-2000, Z-3000 Vacuum Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robots - Wittmann W821 Year of Make: 2012 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric); Axis B (rotation), axis C - pneumatic Travel in axes: X-550, Y-1200, Z-2000 Vacuum Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robot - Sepro SR S5-25 S3 Trans Year of Make: 2013 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-2000, Y-1000, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Robots - Wittmann W821 Year of manufacture: 2018 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B; Axis B (rotation), axis C - pneumatic Travel in axes: X-550, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Roboter - Sepro Industrial Robot SR S5-35 S3 Trans Year of Make: 2012 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-5000, Y-1400, Z-2000 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used
KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...
KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...
OMRON TM12 robotic palletising system was built in 2021 in Taiwan by Techman Robot Inc. The system is designed to automate the palletisation of goods to facilitate their storage, transport and distribution. Used for this task, the reliable TM12 collaborative robot is distinguished by, among others, its robust arm and ease of deployment. Its compact size allows efficient operation in a limited area, without interference with peripheral equipment. Excellent movement dynamics combined with high process reliability are in turn ensured by the servomotors that drive each of its six axes. All this is complemented by an advanced PLC controller that integrates the operation of various systems within a single integrated programming environment. The OMRON palletizing robot included in the station has been used occasionally a few times a year for testing purposes and has never been in continuous ...
Inv. Num. : 8642 Type: ROMAT 350 ROTOL Producer: CLOOS Created: 2007 Parameters: CLOOS Welding Robot Workstation allows welding in the MIG/MAG process alternately at three workstations. Currently, only two are used: One is equipped with a two-axis positioner for fixing the welded part with the possibility of a horizontal axis of rotation with support the second is equipped with the same positioner without support the third workstation is not equipped with a positioner. For an optimal work process, 11 programming axes are available.
A robot automation cell WU Mechanische Werkstätte with a Fanuc robot for product handling for a lathe is available. Gripper system: double gripper, gripper manufacturer: Schunk, robot type: Fanuc M20iA 35M, robot axes: 6, max. payload: 35kg, robot reach: 1810mm, machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm, weight: approx. 2000kg. Lathe power-on time: approx. 34000h, servo-on time (cell): 5700h, mechanical operating hours: 615h. This is only the automation. Documentation available. An on-site inspection is possible.
Very well-maintained Fanuc robots available immediately. They were previously used in a greenhouse in the Netherlands for moving and packaging pots. The robots can easily be adapted to your specific requirements. If you are interested, please feel free to contact us directly. Year: 2000 Brand: Fanuc Model: A05B-1321-B203 Country of manufacture: Japan
Seiko Epson Model LS6-B602S Scara Year of construction 10/2019 Weight 17 kg Max. handling weight 6 kg Equipped with Schunk gripper in very good condition Immediately available from stock.
Maximum load: 30kg Rated load: 20 kg Radius between axes 1 to 6: 1710 mm
YASKAWA MOTOMAN AR 2010 robotic welding station was built in 2022 in Japan by Yaskawa Electric Corporation. The system is used for precision arc welding of workpieces with even the most complex geometries. All the components of the station are integrated inside an enclosed structure. The robotic welding cell is fully complete and consists of the following components: – robot arm: YASKAWA MOTOMAN AR2010 – controller: MOTOMAN YRC1000 – welding positioner: YASKAWA H-2000D (2 pcs.) – welder: LORCH – light curtains: PANASONIC – torch cleaning station: BRG-2000 D – control panel The machining process is performed by a YASKAWA 6-axis robot, which is distinguished by, among others, its clever design and robust arm with an increased range of movement. Its compact, slightly curved design enables efficient working in a small amount of space without the risk of collision w ...
Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.
Two identical swing arm robots Bosch are available. Reach: 300mm, quill stroke: 200mm, quill diameter: 20mm, max. operating pressure: 8bar, max. payload: 5kg, control panel: Bosch PHG 2000, weight: approx. 50kg. Documentation available. An on-site inspection is possible.
- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Robot cell | HALTER - LoadAssistent S-230-35 equipped with a FANUC Robot M-20i and a HALTER 3-finger gripper The Robot cell is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Load Assistent S-230-35 | LoadAssistentS-230-35 | Load-Assistent S-230-35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.
Inv. Num. : 8737 Type: NX 100 Producer: MOTOMAN Created: 2008 Parameters: The workplace consists of the following components: 2 Yaskawa NC100 robots TPS5000 welding power sources Fronius air purifier 2x Single Column Positioner (Dekona 101) 1x double column and single axis positioner
Inv. Num. : 8813 Type: IRB 2400 Producer: ABB Created: 2011 Parameters: Hours: 22152 h Maximum arm reach: 1500 mm Maximum load capacity: 10 kg Machine weight: 150 kg
Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!
Inv. Num. : 8814 Type: IRB 2600 Producer: ABB Created: 2014 Parameters: Operating hours: 5162 h Maximum arm reach: 1650 mm Maximum load capacity: 12 kg Machine weight: 150 kg
Inv. Num. : 8815 Type: TM5-900 Producer: Omron Created: 2019 Parameters: Maximum arm reach: 900 mm Maximum load capacity: 4 kg
A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.
Manufacturer: Musashi Model: ShotMaster 300 SX Type of Machine : Dispensing robot Key features: • Operating speed: 800 mm/s • Positioning accuracy: ±0.01 mm • Synchro Speed function for consistent line width and reduced cycle time Teaching pendant: • Interactive user interface • Stopwatch function • Dispensing condition switching • Data transfer between robots • Language support: Japanese, English, Chinese Hardware configuration: • 26/26 external input/output • USB high-speed communication • Standard buttons: START, STOP, RETURN TO ORIGIN, DISPENSE • Z-axis brake function Find more here - / Contact us at -
A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.
An ABB robot in its original packaging is available. Payload: 180kg, reach: 3150mm, weight: approx. 1750kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
