robot cutting used for sale

Shredder mill with blades Brand: Prat, model: P-5, cutting chamber: 720x540 mm, motor: 30 Kw (40 hp). Stepped open rotor, electrical panel and vacuum cleaner: 7.5 Kw (10 hp).

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Shredder mill with blades Brand: Prat, model: P-6, open rotor, cutting chamber: 800x600 mm. Hopper feed cyclone silo. Missing: motor, pulley, belts, hopper under material output, hopper closing bar with box, blades, opening, electrical panel. To repair.

Shredder mill with blades Make: Cumberland, open rotor, cutting chamber: 410x360 mm, motor: 10 hp

Shredder mill with blades Brand: Prat, model: P-6, open rotor, cutting chamber: 800x600 mm. Hydraulic opening piston, hopper. Missing: electrical panel, motor, pulley, belts, hopper for material output, blades. To repair.

Shredder mill with blades brand: Trit, Model: TRIT-510, motor: 10 hp, new, cutting chamber: 330 x 250mm, with electrical panel.

Shredder mill with blades brand: Prat, cutting chamber: 370x260mm, with open rotor. Inclined cut, motor: 10 hp and electrical panel.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Shredder mill with blades Brand: Prat, model: P-4, cutting chamber: 600x420 mm, direct motor: 37 kw (50 hp). Open rotor, inclined cut. 980 rpm

Soriano brand crusher mill with blades, cutting chamber: 495x340 mm, motor: 7.5 Kw (10 hp). Step rotor, magnet in hopper. No electrical panel.

Shredder mill with blades Brand: Prat, model: P-2, cutting chamber: 350x300 mm, motor: 11 Kw (15 hp), open rotor, soundproof hopper, year: 1990. With electrical panel and manual with safety certificate.

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

4000 x 2000mm 6000w with auto pallet changer

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

8500mm Bunker Loader 4500mm Discharge System Rofin DC025 2500w Year: 2006 Modification to Process upto Ø152.4mm Dust Extractor

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

6000 x 2000mm 6000w with transverse conveyor

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Year of construction: 2006 Burning hours: approx. 11,500 h! Power: 4kW CNC control: Mazatrol PREview Resonator: Panasonic Sheet size: 3000x1500mm In recent years, spare parts have been replaced for about 28,000 €. Additional equipment: Rotary head that makes it possible to mount different nozzles and lenses to cut different materials without having to retool the machine. Automated system for sheet metal loading and unloading

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Refer to code 1049 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Fiber laser machine YAWEI HLF with TOP equipment Laser power: 8kW Sheet size: 3000 x 1500mm automatic shuttle table Siemens touchscreen control with LAN/USB Sheet layer measurement Siemens Drives Precitec Auto Focus Procutter Cutting Head with Autofocus IPG YLS resonator with 8kW The machine will include "everything" 2 years warranty CAD CAM Software Libellula CUT Commissioning Delivery within Germany and Operator/software training offered. We even provide on-site support for unloading + insertion. The machine is a new machine and available immediately. An identical one can be tested at any time under power with us. In our showroom we have various laser machines from our manufacturers under power and various materials to test. We would like to invite you to send us your drawings or drawings. Cut your material. We have been the exclusive trading house and servi ...

Stock number: 3778 CUTTING LINE Manufacturer: MORGAN , Type: 1330 x 0.7 - 3.2 mm Specifications: Size scissors length 1330 mm Size sheet thickness 0.7 - 3.2 mm - Roller feed 2 pc dia. 100 rools Composed of: - Straightening machine 5 pc. dia 100 Reels - Drain reel 5 ton dia. 530-610 mm tone - Scissors Morgan 1500 x 3.2 mm Accessories: Coil trolley 5 ton Length: 6500 mm, Height: , Width: 33.00 mm, Weight:

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated Input Power: 9.2KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7KG Dimensions: 535 x 210 x 380

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

For the purpose of pillow filling; mounted on profile steel mobile base;

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories

Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories