robo used for sale

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Robotic arm for various applications

Arm length 1400 mm, equipped with control unit, remote control, 4.5 Kva, 400V,

The facility comes from a university school and is in very good condition. General: Year of construction 1999 Weight 222 kg

System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h.

Load capacity: 10kg, weight: 245kg, with shuttle table.

With Welding Robot Fanuc ARC Mate 120iBE and Controls Fanuc SYSTEM R-J3iB Mate, including documentation.

Number of axes: 6, reach: 3500mm, max. load: 15kg, weight: 220kg, includes welding robot system, additional torch, 2x welding station with turning device, 1x welding station with Demmler table, 1x Cloos QINEO Champ 450 welding machine, has been regularly serviced, on-site inspection is possible.

Robot 6-axis ABB IRB 140 Year of construction: 2005 Control: IRC5

Industrial robots Brand: Kuka Model: KR 150-2 Series: 2000 Year of construction: 2007 Nominal payload: 150 kg Reach : 2700 mm Number of axles: 6

Welding robot ABB IRB 2400L with welding source Fronius Year of construction: 2000 Arm range: 1800 mm Control: ABB S4C Plus Source: Fronius TransPuls Synergic 4000 Fitted with FRONIUS wire feeder Payload: 7 kg Weight: 380 kg 6 axes Axis range Axis 1 ±360 degrees Axis 2 ±200 degrees Axis 3 ± 125 degrees Axis 4 ±370 degrees Axis 5 ±240 degrees Axis 6 ±800 degrees

Bosch Turbo Scara SR6 Swivel Arm Robot Robot + Control Unit Bosch Turbo Scara SR6 Swivel arm robot 3 842 999 835 Tripod 500 mm Stroke quill 400x25 mm Device connector plugged in Pn pressure max. 8 bar Load max. 5 kg weight 48,5 kg Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S More items - new and used - can be found in our shop! International shipping costs on request!

Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.

Robot 6-axis ABB IRB 2400 Arm range: 1550 mm Control: IRC5 Camera System Evolut Teach pendant Payload: 12 kg

Cell ARCK INGENIERIE with milling robot Staubli Opis:Year of construction: 2006 Robot: Staubli Unimation RX160 Control: CS8C 6 workpiece brackets

Product dimensions: 150-800x120-500x80-400mm, pallet height: 2500mm, max. pallet weight: 1t, cycle time: 7.5s/cycle, with Industrial Robot Fanuc R-220iC 125L and documentation.

Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system.

Number of axis: 6, load: 10kg, weight: 630kg, with controls and documentation, an inspection is possible.

Number of axis: 6, load: 10kg, connected load: 5kVA, with Controls Yaskawa YASNAC XRC and documentation, an inspection is possible.

Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.

Weight: 1,155t, machine was maintained regularly.

Weight: 222kg, with Welding Machine HYBRID 4000M, including spare parts, machine needs official accident prevention test.

There are two identical robots available, operational hours counter: 69,335h, including controls.

Compressed air supply: 6bar, connected load: 2kW, including documentation.

A-travel: 220°, B-travel: 270°, z-travel: 200mm, W-travel: 540°, max. nominal load: 5kg, weight: 21kg.

Number of axes: 6, reach: 700mm, load: 3kg, with controls.

Including controls, the robot needs overhauling.

Drilling robot Panasonic YA-1MAR81ED3 Year of construction: 2001 Arm range: 1745 mm Control: Panasonic Payload: 6 kg Weight of the robot: 220kg

Memory: 128MB, including controls.

Number of axis: 6, nominal load: 90kg, controls: Engel, weight: 1.13t.

Load: 6kg, weight: 112kg, with Controls Stäubli CS7 RX90, weight: 345kg, including documentation and pneumatic dual gripper.

Robot Fanuc R-2000iB/210F (E-25677) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Weight: 1.45t, with Industrial Robot Fanuc M20 iA, max. load: 20kg, the system has been idle for three years already.

Automation of the packaging process, including (1) Industrial Robot Kuka KR 3, weight: 53kg, year of construction: 2005 (2) 2x Labelling Machine Etipack SURPRISE 13, year of construction: 2007.

Max. load: 5kg, weight: 350kg, including controls and documentation.

Weight: 1.12t, operational hours counter: 15,840h, with controls, the robot ran in two-shift operation, a second control system in mint condition is still available.

The robot is unused and still in its original packaging.

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm

There are ten Industrial Robots ABB IRB 6400 und four ABB IRB 4600 available.

Max. load: 240kg, weight: 1.267t, with controls, was maintained regularly, an inspection is possible.

Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE. ULTRASAVER dosing kit: pressure range: 0-7bar, viscosity: low to high. Cartridge holder for automatic dispensing systems: Holder size: 3cc, 5cc, 10cc, 30cc or 55cc, with spacers. JR-1001 mechanical zero point correction.

KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is possible.

PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm - total weight approx.:460 kg

There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. KR120) Load capacity: 120kg, reach: 2700mm. KR50) Load capacity: 50kg, range: 2700mm. List with specifications of the accessories in the pictures.

2 test facilities with a Yaskawa test robot each are available. Load capacity: 7kg, reach: 927mm, repeatability: ±0.03mm, weight: 34kg. Axis speeds: S-axis: 375°/s, L-axis: 315°/s, U-axis: 410°/s, R-axis: 550°/s, B-axis: 550°/s, T-axis: 1000°/s. Documentation available.