ro used for sale

Robot - Sepro Multi Inject MI-30 Year of Make: 2016 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travels in axes approx.: X-4500, Y-1200, Z-2000 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robot - Sepro SR Multi Inject 20 S3 Trans Year of Make: 2014 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-4000, Y-1200, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W843 Year of Make: 2014 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric): X, Y (telescopic), Z, B; Axis B (rotation), axis C - pneumatic Traversing in axes: X-1200, Y-2000, Z-3000 Vacuum Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W821 Year of Make: 2012 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric); Axis B (rotation), axis C - pneumatic Travel in axes: X-550, Y-1200, Z-2000 Vacuum Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robot - Sepro SR S5-25 S3 Trans Year of Make: 2013 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-2000, Y-1000, Z-1500 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Robots - Wittmann W821 Year of manufacture: 2018 Location: Lodz, Poland Description: 5-axis robot: 4 axes are driven by servo motors (electric): X, Y, Z, B; Axis B (rotation), axis C - pneumatic Travel in axes: X-550, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Roboter - Sepro Industrial Robot SR S5-35 S3 Trans Year of Make: 2012 Location: Lodz, Poland Description: 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel in axes approx.: X-5000, Y-1400, Z-2000 Automatic axle lubrication Touch control panel The safety package for robots Robot with adapter and protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 762 mm, 3048 mm, 813 mm

Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...

Two identical Yaskawa robots are available for the welding process. Payload: 6kg, reach: approx. 1350mm, axes: 6, repeat accuracy: +/-0.08mm, weight: approx. 130kg. An on-site inspection is possible.

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

Working widths: 1800 mm roll surface width: 2000 mm diameter: 220 mm rubber quality: Weichgummi rubber: R89, gelb Shore: 75° shore type: 222.11/1800 1 pair of rollers (piece) for dyeing padder 222.11 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidolph Laborata 4001 complete with condenser and water bath, 0-270 rpm

Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding

Welding turntable - Welding rotary device with housingRound welding deviceLoad capacity approx. 50 kgTurning chuck diameter 300 mmTurning chuck speed 1.0-15 rpm. Mains connection 230 volts, 50 Hz- Spiral lathe chuck with inwardly stepped chuck jaws- Speed control infinitely variable via potentiometer- Drive via gear motor, direction of rotation left- Start via electric switch- Welding current transmission with sliding contact- Extraction connection 160 mm- Interior lightingDoor opening W x H 715 x 1060 mmInterior dimensions W x D x H

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132Fabr. No. 173082 - 3101 Year of manufacture: approx. 1995Volume flow: approx. 50 m3/hNegative pressure: 0.5 mbar (indicated on the nameplate)Negative pressure: - 0.9 bar (determined during test run)Engine power: 3 kWMotor speed: 1420 rpm. Mains connection: 400 volts, 50 Hz- Oil-lubricated rotary vane pumpDimensions L x W x H: 700 x 420 x 310 mmWeight: 78 kgGood condition; used

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

Round clamping plate with T-slot straightening plate and clamping tableDiameter 1500 mmCentering hole in the middle 80 mmPlate thickness 54 mmWorking height 970 mm- 6 T-slots 18 mm- 3 threaded holes M20, bolt circle 1000 mm- Steel substructure without centric holeWeight 785 kggood condition; used

Electric hoist, crane, electric wire rope hoist, winch DEMAG type P 10Fabr. No. 941 477 Year of construction 1962Lifting capacity 2000 kg at 4 stringLifting height 5 metersLifting speed 6 m/min. Fine stroke speed 1.3 m/min. Reeving 4/1Motor power 0.6 / 2.6 kWNet connection 380 volts, 50 Hz- DEMAG hoist, type 19/11 K28P- DEMAG electric chassis, type 13 / 6 K8- 1 travel speed approx. 19 m/min- Chassis for double T-beams, beam width 120 to 180 mm- Load hook for 4 load trains- Control bottle for the hoist

Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300

Filter system - extraction system, central extraction cartridges - impulse filter VALCO type Pidclean 4NZentral welding fume extractionseries. No.: 15003 Year of construction 2003Volume flow max. 3500 m³/hFilter area 92.8 m²Differential pressure 700 PaExtraction connection at the filter inlet 250 mmExhaust air connection at the filter outlet 225 x 160 mmCompressed air requirement 4 to 6 barMotor power 5.5 kWNet connection 400 volts, 50 Hz filter control AUTEL, type Eco S6- pneumatic filter cleaning, automatic via control - 4 pieces

6 Axis Robot Servo Controller,Drive, Motion Control, Servo Pack, Servo UnitServo Unit for YASNAC XRC UP6YASKAWA / MOTOMAN Type CACR-UP6AACO/N RA8616-0Y4A-46S/N: D000Z2676590046Version: 6 Axis Module for Robot- Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6- Interface USB Power Supply Type JUSP-RCP01AACAnmity W x H x D: 270 x 310 x 200 mmWeight: 8.5 kgUsed, very good condition; used

Writing desk, rolling desk, shelf trolley, logistics trolley, shelf trolleyTransport trolley, platform trolley, workshop trolleyFETRA Type 5834Writing surface height: 1100 / 1190 mmWriting surface: 605 x 585 mmStorage shelves: 600 x 495Load capacity per shelf: 50 kgTotal load capacity: 100 kg- Rolling desk made of tubular steel and profiled steel screw construction, powder-coated, blue RAL 5007- Writing surface on wooden board with stop rail, approx. 10 inclined- 2 shelves, variably screwed in (2 folder heights possible)- 4 pieces Swivel fixed castors (125 mm) with plastic rim and

Working width: 2000 mm Roller width: 2200 mm pressure: 50 t Pressure line: 230 N / mm Number of rollers: 3 Stück Upper roll: 280 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm dia Roller covering: Polyamidmantel Lower roll: Stahl dia diameter of lower rolls: 280 mm Roller covering: Schreiner-Gravur Clouth speed: max.100 m/min Weight: 26 to dimensions of the machine ca.: 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder, The data for this ad was created with ModulMWS - the sof ...

- Filter area 6 m2 - With residual filtration device - Machine in good condition

PALMARY OCD-3260 CNC grinding machine was built in 2020 by the Taiwanese company Palmary Machinery Co., Ltd. The machine, designed to grind holes and rotary surfaces with a maximum diameter of 320 mm, offers excellent machining precision and efficiency for many years of intensive operation. To achieve this, a number of state-of-the-art components are used, such as a specially constructed spindle made of high-quality steel alloys which is mounted on precision bearings. In turn, the design of the grinding wheel spindle uses special hydrostatic bearings, which achieve high operating speeds with no friction between the surfaces. This eliminates heat energy and thus the creation of deformations. The working head, driven by a powerful servomotor, rotates in a range of -30° to +90°. All guideways are lubricated by an advanced automatic hydrostatic system, ensuring, among others, extremely  ...

Thread rolling machine UPW 25.1

Manufacturer:Porta Model: TRO-06-N08 Year of Manufacture: 2012 Machine Type: Production Cell with CNC Rotary Transfer Machine Control: Porta Additional Components: - Filter System (Knoll VRF450, 2011) - Chain Conveyor (Knoll) - External Cooling Unit - Mist Extraction System - Workpiece Conveyor - Handling: 3x 6-Axis Robots (ABB) - Cleaning System (Mako) with Filter System - Small Pallet Turner (Mako) Find more here - / Contact us at -

Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible.

Rotary Brush Screen Properties: Total height 1900 mm Overall length 580 mm Depth 500 mm

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible.

Key data: 450 mm, 1500 mm, 225 mm

Stock number: 3995 CNC CYLINDRICAL GRINDING MACHINE Manufacturer: KELLENBERGER, Type: KEL-Varia 225 - 1500 Machines NO.: 650533, Year of manufacture: 2002 Specifications: Grinding length 1500 mm Gr. grinding diameter 450 mm Z-ash 1650 mm X-ash 320 mm Caschen 0.001 degree B ash 0.001 Large stone diameter 500 x 80 x 203.2 mm Control Heidenhain 1830 m Fabr. Accessories: Cooling water system. Grinding hubs 2 pcs Weight: 6000 kg

KUKA Robot KR30L15/2 Year of manufacture 2002 Weight 930kg Only 75`000 operating hours PC control type K C2 including panel Drive controller KSD Control cabinet KR CC USB stick with documentation and schematics Unloading and machine data in the appendix Annually serviced by Kuka Roboter Schweiz AG with service contract maintained Robot is fully functional and in very good condition Including various spare and new parts Is ready for pickup, loaded on pallets Included: Axis control module KSD1-48, new price 1900,-CHF Power supply KPS600/20, new price 4500,- CHF Three-phase servo motor CO/KKSSY, new price 2200,- CHF Control PC KC2, new price 5400,- CHF CI board / mains filter / cable sets, approx. selling price 800,- CHF Axis control module KSD1-32, new price 1400,- CHF Axis control module KSD1-08, new price 1200,- CHF Support batteries / HDD hard disk / motor protecti ...