ro used for sale

Robot welding cell incl. positioner Hydraulic 3D welding table ABB max. workpiece weight 2 tons and max. diameter 1400 mm Robot IRB 4600 M2004 Welding torch system Wire Select 2.0-Vers.LSQ5/Q80 with 2-fold wire feed Thielmann gas nozzle cleaning device Protective housing with door for robot welding cell

Bread roll line Kövy Fortuna KM6 6-row - 6-row sliced roll line with magazine and head machine - with discharge - Fortuna KM6 Head Machine - Year of construction 2004

Section bending tools included: tubedia 50 mm amp; 80 mm Number of rolls: 3 rolls Roll capacity cold: 2550 x 15 mm Profile bending machine: yes Pre-bending : yes

Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 0,37 kW condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 350 Roll width in mm: 280 Roll division in mm: 110 Driven: YES, NO scope of delivery: without supports and side guides For individual, expert advi ...

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

Manufacturer: Transportrollengang, Total metres approx.: 2,2, Working widht mm: 800, Total hight mm: 280, Adjustable: yes, Rollenteilung mm: 200, Rollendurchmesser: 80, Driven: yes, Working widht mm: 800, Width total mm: 1000, Drive power kW: 1,

Manufacturer: Bürkle, Type: Doppelwalze DAL 2, Year: 1992, Work piece width min-max mm: 10 - 1300, Min.-max. workpiece length in mm: 100, Min.-max. workpiece height in mm: 3 - 120, Operating side: rechts, UV-laquer roller: yes, regelbarer Direktantrieb für Auftragswalze: yes , Auftragswalzengeschwindigkeit m/min.: 5 - 30, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Attachment bracket roller: yes, everse drive: yes, rbakel: 1 x, Feeding speed min/max: 5 - 30, Hight adjustment by engine: yes, Pump system: Membrane, Year :1992

Manufacturer: Hackemack Transpoortband, Type: 3420, Working widht mm: 1400, Total hight mm: 980, Adjustable: yes, Seitlicher angetriebener Führungsriemen: 3500, Rollenteilung: yes, Working widht mm: 1400, Antrieb verstellbar: 1600, über Freuquenz: 5-30, Handverstellung Vorschub: 2 X 1,5, Conveyor speed m/min: 2 Unterschidliche Geschwindigkeitenb,

Sorbini: yes, Rubberized roller: yes, Rubberized length cm: 1450, Shore hardness: approx. 60, Thickness gum approx. mm: 15, Steel core diameter approx. mm: 215,

Manufacturer: Hackemack Rollgang, Type: Transportrollengang, Year: 1990, Total metres approx.: 5, Working widht mm: 1400, Total hight mm: 980, Roller pitch mm: 120, roller diameter: 60, Length mm: 5000, Accumulation roller conveyor: yes, Working widht mm: 1400, Conveyor speed m/min: 5-30, Drive power kW: 1,5, Operation side kW : rects, Stauerollen 1000 mm länge, Year :1990

Sorbini: yes, Rubberized roller: yes, Rubberized length cm: 1450, Shore hardness: approx. 60, Thickness gum approx. mm: 15, Steel core diameter approx. mm: 215,

Manufacturer: Purete , Type: Einzellackwalze, Year: 2017, Control: Shllin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: rechts, Working height: 890, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Shore: ca.40, Durchmesser Auftragswalze mm: ca.240, Dosierwalze verchromt: yes, Pump system: Membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: yes, Carriage: yes, Year :2017

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, Year :2017

Manufacturer: Venyeskob, Type: Stangentransport, Working widht mm: 1400, Total hight mm: 900, Adjustable: yes, Roller pitch mm: 100, Feeding speed min-max m/min: 10-36, Manual adjustment feed: yes, Working widht mm: 1400,

Manufacturer: Bürkle, Type: DALD 1300, Year: 1990, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Operating side: links, Working height: ca.900, Widht of roller coater: 1350, Widht of metering roller: 1350, Attachment bracket roller: yes, rbakel: no, Work piece thickness max mm: 5, Feeding speed min/max: 5-25, Hight adjustment by engine: no, Year :1990

Manufacturer: Schwerlastrollen, Driven: no, Working widht mm: 950, Width total mm: 990, Total hight mm: 140, Adjustable: no, Roller pitch mm: 220, roller diameter: 110, 1 Stückzahl : 1, 1 Stücklängen mm: 3700, 2 Stückzahl : 2, 2 Stücklängen mm: 1200, 3 Stückzahl : 1, 3 Stücklängen mm: 700,

Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: 1,0, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, everse drive: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: yes, Strassenbetrieb: möglich, Carriage: yes, Year :2008

Manufacturer: Bürkle Lackauftragsmaschine , Type: DAL 1, Year: 1989, Control: hand, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-120, Operating side: rechts, Working height: 890 +-, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 6-30, kW - Leistung Transport: 0,75, Auftragswalzengeschwindigkeit m/min min-max: 6-30, Durchmesser Auftragswalze mm: 238, Dosierwalze verchromt: yes, Attachment bracket roller: yes, rbakel: yes, Year :1989

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working length mm: 2500, Working widht mm: 1400, Total hight mm: 900, Engine power kW: 0,75, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Manufacturer: Cefla Transportrollengang, Type: TR 2500, Year: 1999, Working widht mm: 1400, Working widht mm: 1400, Year :1999

Hymmen: yes, Rubberized roller: yes, Rubberized length cm: 1415, shore hardness: 60, Thickness gum approx. mm: 8,

Manufacturer: Hymmen, Type: TLX 2,0, Year: 1982, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Working height: 950, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 10-25, Gummierte Auftragswalze mm: yes, Gummiqualität : 50, Direktantrieb Dosierwalze: yes, Verchromte Dosierwalze mm: yes, Metering roller drive m/min: ca.4-12, rbakel: yes, Compressed air bar: 6, FREE TEXT: ohne Schaltschrank, Year :1982

Manufacturer: Geldmeier, Type: Transportrollgang, Driven: yes, incl.control: no, Length-width mm: 2500 X 890 X 800, Length mm: 2500, Width total mm: 800, Total hight mm: 890, Adjustable: yes, Conveyor speed m/min: regelbar über Umrichter,

Manufacturer: Cefla, Type: TR 3500/A-D, Year: 2015, incl.control: yes, Length-width mm: 3500x1300, Programming possible: yes, Length mm: 3500, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: TR 2000, Year: 2015, incl.control: yes, Length-width mm: 20000x1300, Programming possible: yes, Length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: TR 3000/A-D, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Programming possible: yes, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: 2015, Year: TR 3000, incl.control: yes, Length-width mm: 3000x1300, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Year :TR 3000

Manufacturer: Cefla, Type: Inter-Tec, Year: 2015, Control: yes, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3-80, Vorschub Transport m/min min - max: 5-20, Required space L x W x H mm: 1670x3460x2350, Year :2015

Manufacturer: Cefla, Type: TR 3000, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Sorbii, Type: Smart Coater M, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: ca 3 - 80, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: ca 5 - 25, Auftragswalzengeschwindigkeit m/min min-max: ca 5 - 25, Roller lift out: yes,

Manufacturer: Transportrollengang, Type: unbekannt, Rollenbahn L: ca.10000 mm, Length-width mm: 10000 X 800 X ca.950, 1 Stückzahl : 1,

Length mm: 1000 - 4000, Working widht mm: ca. 1130, Total hight mm: ca. 250 ,

Manufacturer: Hymmen, Type: TLX M, Year: 1992, Work piece width min-max mm: 1300, Working widht max mm: 1300, Operating side: links, Working height: ca 980, UV-laquer roller: yes, Verchromte Dosierwalze mm: yes, Glättwalzengeschwindigkeit ca. m/min.: 80, Steuerung Nicht-Ex : 5 - 25, Widht of roller coater: yes, Application roller drive m/min: yes, Widht of metering roller: Band, Year :1992

Manufacturer: Purete, Type: PRT-R1106, Year: neu, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 620, Operating side: rechts, UV-laquer roller: yes, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Verchromte Dosierwalze mm: yes, Feeding speed min/max: 0 - 20, Year :neu

Manufacturer: Purete, Type: PRT-F1113, Year: neu, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Dosierwalzenbreite mm: 1.450, Glättewalzenbreite mm: 1.450, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Feeding speed min/max: 0 - 20, Wight approx. kg: 1.700, Required space L x W x H mm: 1.600 x 2.575 x 1.700, Year :neu

Manufacturer: Purete, Type: PRT-R2113b, Year: Neu, Work piece width min-max mm: 1.320 , Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 2 - 80, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Widht of roller coater: 1.450, Required space L x W x H mm: 1.600 x 2.575 x 1.700 mm, Year :Neu

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Sorbini, Type: T/20-MF, Year: 1999, Control: Cefla, Work piece width min-max mm: 1350, Durchlassbreite min-max mm: 1350, Working height: links, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: yes, Auftragswalzengeschwindigkeit m/min min-max: 5-25, Gummierte Auftragswalze(n): yes, Auftragseinheit 1 shore härte: yes, Auftragseinheit 1 : yes, Gummierung mm: 5-12, Shore härten möglich: yes, Shore: möglich, Durchmesser Auftragswalze mm: yes, Type of transportation: 2,5, Working hight approx mm: 1520, Year :1999

Manufacturer: Schuko, Year: ca.1990, Control: yes, Supply air filter covers: 1, Heizmedium : Warmwasser, Splashback dry: yes, Length max mm: 3000, Width max mm: 1600, Number of spray booths: 1, Supply air system: yes, Hand spraying stations: 1, Absaugfläche m²: ca.4, Zuluftgerät kW Leistung 1: 89,6, Heating agent warm water: yes, Engine power kW: ca 4, Ceilings for incoming air: 1, Year :ca.1990

Manufacturer: Sorbini, Type: T/20-SP, Year: 1999, Working width min-max mm: links, Arbeitshöhe min- max mm: yes, Durchlassbreite min-max mm: 5-25, Operating side: 15, Working height: EPDM, Lackauftragseinheiten: yes, Spachteleinheiten: yes, Vorschub Transport m/min min - max: yes, kW - Leistung Transport: 5-20, Auftragswalzengeschwindigkeit m/min min-max: yes, kW - Leistung Auftragswalze: 1350, Stärke Gummierung min-max mm: 5--25, Stärke Gummierung mm: yes, Dosierwalze verchromt: yes, Reverse und Gegenlauf: Band, Glättewalzengeschwindigkeit: membrane, Year :1999

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Carmet, Type: TRM 25, Year: 1999, Length mm: 2500, Working widht mm: 500, Total hight mm: 900, Drive power kW: 0,3, Year :1999

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Manufacturer: Bürkle, Type: SAL, Year: 11.97, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Operating side: rechs, Working height: 920 +-, UV-laquer roller: yes, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 6 - 30, Direktantrieb Dosierwalze: yes, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Type of transportation: Band/Rolle, Pump system: Membrane, Year :11.97

Manufacturer: Bürkle, Type: SLC 700, Year: 2009, Control: Bürkle, Work piece width min-max mm: 700, Operating side: rechts, Year :2009

Manufacturer: Venyeskob, Type: Schrägrollengang, Year: 1995, Total metres approx.: 6,5, Working widht mm: 1300, Working widht mm: 1300, Year :1995

Manufacturer: Venyeskob, Type: Zentrierrollengang, Year: 1995, Total metres approx.: 5, Working widht mm: 1300, Total hight mm: ca 980, Working widht mm: 1300, Year :1995

Manufacturer: Bürkle, Type: SLC 1300, Year: 1999, Control: Sütron, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: rechts, Working height: 930, regelbarer Direktantrieb für Auftragswalze: yes, Auftragswalzengeschwindigkeit m/min.: 6-30, Gummierte Auftragswalze mm: 238, Metering roller drive m/min: 1-6, Attachment bracket roller: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Year :1999