ro used for sale

Precision slide guides roller bearings Travel 150 mm Carriage width 75 mm Height 32 mm Threaded spindle M8 x 1with cross crank and scale Scale 0.1 mm Load capacity approx. 1.5 kg Space requirement L - 380 mm x W - 75 mm x H - 32 mm Weight approx. 3.6 kg -Unit price-

Dematic conveyor system Accumulating roller 24000-500-440 RA2346 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 24000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Coordinate table - rotatable BAZUS Table size 700 x 400 mm Clamping area 330 x 580 mm 3 T-slots 12 mm Travel distance approx. 400 mm Scaling 0.05 mm 1 spindle rotation = 4 mm swivel 360° with locking mechanism Overall height 195 mm Max. table load approx. 100 kg max. working pressure approx. 500 kg Dimensions L - 850 x W - 400 x H - 195 mm Weight approx. 172 kg original packaging - year of construction estimated - New - unused - - 1 piece in stock -

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Transnorm curved roller conveyor driven 90°-680-600 IR800 RA1242 Conveyor curves Make: Transnorm Type: TS 2712 Year of construction: 2005 Conveying speed V = 0.58 m/sec Conveyor angle: 90° Conveyor width: 600 mm Total width outside: 680 mm Inner radius: 800 mm Drive Center Role: slide stored with conical plastic molding Shipping weight: 130 kg on euro pallet Transportmasze: L x B x H = 1800 x 900 x 450 mm Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 1996 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 680 Roll width in mm: 600 angle: 90° Driven: YES scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten ...

AMI pallet roller conveyor ARF89 KÜ 1397-1262-1050 RA2014 Pallet roller conveyor segment, continuous design length: 1397 mm Roller width (RB): 1050 mm, Steel rolls Nominal/outer width (NB): 1262 mm roller distance / pitch 175 mm Overall height frame: 160 mm Totall height: 500 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2003 Electric data: 0,37 kW condition: good (used) Conveying length in mm: 1397 Nominal / outside width in mm: 1262 Roll width in mm: 1050 Roll division in mm: 175 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Um ...

Offer 24518 Specifications: - Load capacity 150 kg - Pick-up crosses + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotary movement infinitely variable - Right.- Counterclockwise rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

Various flanges

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Dematic roller curve right or left 90°-660-590 IR865 RA2322 Make: Dematic Running direction: 90° right running/ left running Roller width (RB): 590 mm conical, plastic coating Nominal/outer width (NB): 660 mm Inner radius (IR): 865 mm 3x 300-500V, 0,37kW Height frame: 132 Height including motor: 275 Gear motor: SEW Conveyor speed: between 0,142 and 1,42 m/s with Optionally available: frequency converter for freely adjustable conveyor speed Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 865 Nominal / outside width in mm: 660 Roll width in mm: 590 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply ...

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Transnorm roller curve conveyor right 180°-770-700 IR 800 RA2350 Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 0.1 to 1.0 m/s Weight: 210 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Kette Construction year: 1994 condition: gut Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: 700 angle: 180° Driven: YES scope of delivery: without s ...

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

Dematic roller curve right 90°-500-440 IR795 RA1680 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 795 mm length: 1790mm 3x 300-500V Height frame: 132 Height including motor: 275 Gear motor: SEW WF20 DT71D4/Z/MM03/BW1 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2005 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

Used rotary bottle rinsing machine from Italian company Poggio, model FM24. New 2007.

Low-maintenance BATES robot palletizing cell for bags: + Take-off belt with square rollers, new + FANUC robot incl. control cabinet and teach pendant, overhauled + Platform for robots, new + Gripper for bags, new + Security fence incl. light barrier, new + 1 or 2 full pallet spaces + Bag dimensions/sizes e.g. flour 10.0 kg - 50.0 kg + Standard pallet sizes + Turnkey from the workshop + CE + Warranty Options: o Bag transport o Empty pallet magazine o Pallet transport o Grippers for pallets, cartons, crates, packages, buckets, hobbocks, etc. o Assembly o Commissioning

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0710LDS Load capacity: 230Kg Lifting capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Extendable platform + 0.90 m Transport Dimensions 2.45 m x 1.01 m Height: 2.18 m Railing folded down Height: 1.83 m Weight approx.: 1940 Kg Working height: 8.7 m Platform height: 6.7 m Climbing ability up to: 25 % Drive via battery 24V / 260 Ah Integrated charger 24 V/ 36 A Support with automatic level compensation. non-marking chains German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA wil ...

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; Wheel-mounted work platform; lifting platform; Lifting platform with support Type: CFPT1218RTE Payload: 365 kg Lifting capacity platform extension: 140 kg Platform dimensions: 2.91 x 1.53 m Extendable platform + 1.44 m Transport dimensions 3.34 m x 1.79 m Height: 2.77 m Railing folded down Height: 2.11 m Weight approx.: 4900 Kg Working height: 14 m Platform height: 12 m Climbing ability up to: 35% Drive via battery 8x6V / 240 Ah Integrated charger 48V/35 A Support with automatic level compensation. Light Non Marking Tires German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in  ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...

Key data: 400 mm, 40 mm

- incl. key Specifications - Table diameter: 400 mm - Table height: 40 mm - Rotation range: 360° - Pan/tilt range: 0 - 90 ° - Max. load capacity (horizontal table): approx. 200 kg - Max. load capacity (table vertical): approx. 100 kg - Dimensions mounting plates horizontal/vertical: 375 x 500 / 375 x 255 mm - Dimensions rotary table WxHxD (table horizontal): approx. 570 x 280 x 500 mm - Net weight: approx. 200 kg

NEW 10x Sandvik Coromant Inserts R390-170408M-PM 1030 Area of application of the plates: P and M

Kuka KR 16-2 Year of Make: 2010 Payload: 16 kg Reach: 1611 mm Control: KRC2ED05

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven: YES sc ...

Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For ind ...

Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good ( ...

Used biscuit line for continuous round and square rolls BERTUETTI, Type: Universal Line - for round rolls, such as hamburgers and square ones - Universal dough divider and rounder SV250-G14 - Continuous rounding by G14 - Feed belt 1,900 mm - 6 rows - 1, 2, 3 or 6 rows can be used - Guillotine cutting system - Automatic sheet loader N20 for sheet sizes 60 x 100 cm - Lifting tipper - Dough intake - Sowing SST - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

WITH CUTTING DEVICE S. No.: 98 0044 10

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

PART NUMBER: 7458 SPECIFICATIONS - max diameter of the machined pins 120mm - 60mm sleeve installed - 5 additional bushings 40, 70, 80, 90, 100mm - max input material diameter 150mm - min input material length 800mm - max machining allowance per side 15mm - knife head drive motor 18.5kW - 4 types of speed feed + forward/reverse - feed motor about 1.1kW Successively: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling outhands - dimensions length/width/height 3060x1240x1400mm - weight about 1800kg ADVANTAGES – Polish production – 3-knife head – additional bushings included – used turning machine, very good condition Net price: 36900 PLN Net price: 8581 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Sendzimir, completely revamped by IS2 Type: ZR23-25 Built: No information! Completely rebuilt: 2000 Stopped: 09/2022, still under power Strip width: 280 – 625 mm Thickness: Entry: 3.5 mm Exit: 0.05 mm Speed: 1st gear: 0 – 165 m/min. 2nd gear: 0 – 280 m/min. PLC GE FANUC – IC697CPX782

Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports ...

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

table diameter: 160 mm table load: - table height: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Standard, IP 65, A4-A6, weight 99 kg, max. load capacity 240 kg, warranty

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Unused, stock item, Model Standard, A4- A6, IP 65, max. load capacity 30 kg, weight 99 kg, warranty

Refer to code 1155 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.