ro used for sale

Stock number: UG6346 Used stainless steel Padovan (IT) filter with horizontal rotating discs. Filtration surface 20 m2. Working output in range 25000-27500 l/h. Machine had been working on fruit juice filtration / food industry. Has local control panel and has technical documentation.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a Lippelt Mini Rustica with guillotine and punch. Good bakery condition

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Fortuna Head Machine Type: KM5 5 rows Weight range: 35-80 grams Hourly output: max. 5500 pieces With flour spreader cut + round off analog control can also be synchronized with a proofing cabinet 400V 50Hz Height: 170cm Width: 200cm Depth: 100cm

We sell a Fortuna A3 semi-automatic.

Ground cable, copper round cable, copper cable, busbar wire -Manufacturer: Medi, copper round rope highly flexible -Length: approx. 100 m -Wire diameter: 3.00 mm -Quantity: 4x roll available -Price: per roll -Roll dimensions: Ø 160 x 160 mm -Total weight: 4.2 kg/pc.

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: FPU, rotating center point -Type: 8811-5 -Recording: MK5 -Dimensions: Ø 84 x 226 mm -Weight: 3.5 kg

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 70 x 220 mm -Weight: 2.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, rotating center point -Type: ZNA 205 -Recording: MK5 -Centering point: Ø 28 mm, without point -Dimensions: Ø 90 x 225 mm -Weight: 4.3 kg

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

BAQUETTE MACHINE

Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 140 mm -Weight: 13.2 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 560 x 120 mm -Weight: 9.8 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 130 mm -Weight: 10,9 kg

Angle conveyor (roller-chain) - galvanized rollers - stainless steel chain - working length of the roll: 730 mm - roll diameter: 50 mm - lifting on chains: B08-1 - spacing between chains: 145 mm - number of chains: 5 - construction: stainless steel - includes 2 geared motors: - for rollers – SEWUSOCOME; 0.25 kW; 1300/77 rpm - for chains – SEWEURODRIVE; 0.25 kW, 1300/77 rpm

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Revolving center: Mounting: MK4 -Type: unfortunately without type designation -Number: 2x centering tip available -Price: per piece -Dimensions: Ø 71 x 204 mm / Ø 72 x 200 mm -Weight: 2 kg/piece

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Schroff / Papst, fan assembly type 60700-018 with 3 axial fans -Axial fan: Papst Type 4850 N -Voltage: 220 V / 9 W -Dimensions: 480/180/H40 mm -Weight: 2.7 kg

BOMAG BW 200 Roller / Pneumatic Compactor, 7 to, 4 Zyl Deutz Motor, Vibration full working, German Machine, Year 1977

BOMAG BS 180 Grit Spreader for Roller / Grit Spreader Sprayer for Compactor, Grit Spreader & Hydraulic Arm, Year 2008

Seitz Enzinger Noll rotary vacuum filter with 15 m2 filter area. Filter run to the last, because of the purchase of a larger machine.

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Sandvik Costa, rotating centering point, centering cone flattened -Recording: MK5 -Model: A-5-65085 -Dimensions: Ø 110 x 275 mm -Weight: 6.4 kg

Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

roller chain, drive chain, single roller chain -Manufacturer: Witra, drive chain single roller chain type 20B -Length: 3200 mm -Pitch: 31.75 mm 1 1/4 / Width 43.2 mm -Rollers: Ø 19.05 mm -Quantity: 36x roller chain available -Price: per chain -Package dimensions: Ø 330 x 180 mm -Weight: 11.9 kg/piece

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

5kg = approx. 149 pcs welding electrode, rod electrode with reinnickel core rod unused, Manufacturer Thyssen Type Nickel A Original shrink-wrapped in foil, ovp in cardboard! The electrode melts slightly delayed by a pulsating arc, whereby a very good wetting of the base material is achieved. Particularly suitable for joint welding on grey cast iron (old cast iron) Dimensions, welding data, packaging units Diameter (mm) Length (mm) Welding current (A) Directional weight (kg/1000 pcs) Package contents (pieces) Package contents (kg) 2,5 350 50 - 100 21,0 238 5,0 3,25 350 70 - 130 33,5 149 5,0 4,00 350 90 - 150 49,5 101 5,0 Weight approx. 5kg Diameter 3.2mm

Offer here two solid vacuum boosters of medium size with 700m³/h nominal suction speed

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 11 m/min -Conveyor belt: 1375 x 400 mm -Drive: North 0.55 kW -Total dimensions: 1640/1060/H260 mm -Weight: 168 kg

roller chain, drive chain, duplex chain -Manufacturer: Rexnord, drive chain duplex chain heavy version type R38-2 with 4 chain locks -Length: 4600 mm -Pitch: 38.1 mm / 1 1/2 Roll width 25.4 mm -Transport dimensions: 480/410/H120 mm -Weight: 78.8 kg

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

Specifications Roller conveyor 4000 mm Roll width 300 mm Rolls Ø 30 mm Number of rolls 16 Support feet 2 elements à 2m

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: WDI Python, crane rope winch rope Ø 22 mm -Rope type: 6x36WS -Length: 82 m -Number: 6 wire rope drums available -Price: per drum -Transport dimensions: Ø 850 x 490 mm -Weight: 192 kg/piece

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 275 mm Frame width: approx. 245 mm Minimum height: approx. 660 mm Maximum height: approx. 900 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut abm.: approx. 180 x 60 x 50 mm Mounting plate abm.: approx. 140 x 220 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Roofing nails: Nail rolls, 2 partially used cartons/total approx. 10,000 pieces -Type: DPN 31x22 FV Hot-dip galvanized -Price/Sale: complete -Dimensions: 470/280/H240 mm -Total weight: 17.1 kg

Roofing nails, strip nails, nail strips, roofing nail rolls, coil roofing nails -Manufacturer: Holz-Her, Roofing nails, nail rolls, 1 carton/ approx. 7200 pieces -Type: 3.0x22 A2 stainless steel -Price/Sale: complete -Dimensions: 490/300/H140 mm -Total weight: 12.6 kg

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg