ro used for sale

Manufacturer: Barberan, Year: 2012, Working widht mm: 1330, Adjustable: yes, Length mm: 2000, Driven: yes, Working widht mm: 1330, Conveyor speed m/min: 10-20, Year :2012

Manufacturer: Ersatzrollen, Length mm: 505, roller diameter: 80, 1 Stückzahl : 495,

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Manufacturer: Giardina Lackwalze 1450 mm 55 shore Neu, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 190,

Manufacturer: Wiwa Leimpumpe, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 196,

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

Manufacturer: Bürkle Lackersatzwalze 1356 shore 60 Gummierung Neu, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1356,

Manufacturer: Sorbini Moosgummiwalze, Sorbini: yes, Rubber coating length cm: 1298, Shore Härte: Moosgummi alt,

Manufacturer: Bürkle Moosgummiwalze 1416 mm ca. Poore 2 gebraucht muss geschliffen werden, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Approx. thickness of rubber coating in mm: 20,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 174 D mm, Spare roller: Dosierwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1415,

Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use

Rolling machine for jewellery production, jewellery 1 side with smooth rollers 1 side for profile material

Manufacturer: Giradina Lackwalze, Type: gelaufen in Maschine BMG/95/07, Year: 1998, Year :1998

Manufacturer: Giardina Lackwalze 1450 mm 60 shore gerillt Neu, Giradina: yes, Roller rubber coating: 1450, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.30, Creasing on a 1 cm: gerillt,

Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use

24 stations, with saege unit

16 stations, max. 12 mm , reel, ring straightener, Knoll scratch tape foerderer, various hoistand and spare parts

Manufacturer: Bürkle Stahldosierwalze 1415 mm 174 D mm, Spare roller: Dosierwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1415, : SLC, : 174, : Chrom,

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Round table FERGUSON Pt182RH15752 - see pictures

Manufacturer: Bürkle, Spare roller: für SAS, : yes, : SLS 1300, : ca. 198, : yes, : 20, : ca.60 Gummierung Neu,

Spare roller: SLC, Bürkle: yes, Stahlkerndurchmesser ca. mm: 186, Total lenght mm: 1300,

Manufacturer: Bürkle, Year: ca.1990, Pickling ejector brushes: yes, EX protection: yes, Cleaning agent pan: yes, Number of rotations controlled: yes, Brush type: max., Number of units: 2, kW Leistung Motoren: ca.0,5, Units mounted upright: yes, Year :ca.1990

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.

Manufacturer: Bürkle Lackwalze 1416 mm 60 shore , Spare roller: Ersatzwalze , Hymmen: yes, Venyeskob: 1416,

Manufacturer: Finnrose, Type: Finnrose, Year: ca.1992, Working widht mm: 1350, Total hight mm: 950, Adjustable: yes, Rollenteilung mm: 100, Rollendurchmesser: 60, Driven: yes, Working widht mm: 1350, Conveyor speed m/min: 5-25, Drive power kW: 0,5, Year :ca.1992

Manufacturer: Hackemack, Type: KTR, Year: 1992, Driven: yes, Length mm: 1000, Working widht mm: 1350, Total hight mm: 850 - 950, Rollenteilung mm: 140, Rollendurchmesser: 65, Conveyor speed m/min: 6 - 30, Drive power kW: 0,37, Year :1992

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

FANUC LR Mate 200i Automation Robot + Controller R-J2+ Handheld The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a wide range of manufacturing and system processes. The LR Mate 200's tabletop design allows it to be used in a wide range of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design wraps all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration when powered on. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end effector connector integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an  ...

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...

New machine 2-year warranty Advantages: + unbeatable price-performance ratio + already standard: mobile machine, ideal for fast floor mopping + Stainless steel cutting blade + Quickly replaceable, coated cutter head + Up to 4 different cutter heads can be used with one machine + extremely wide weight range (16 gr - 400 gr round-knitted possible!) + Uniform division of the dough, excellent rounding of the dough pieces + Effective shutdown at the touch of a button + Ergonomic knife cleaning position (head can be swivelled forward by 90 degrees) + Active switch-off, pressing time and duration can be programmed + Digital display, 10 programs can be stored + Easy and quick adjustment of the effective room height + Side holder for knitted plate, immediately at hand SERIES accessories: 3 knitting plates included SPECIAL accessories, available at an additional cost: - Add ...

Hydraulic round table, for adaptations, etc.

Hydraulic round table with 4 stations, 800 mm

Offer 22187 Roller conveyor height-adjustable Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Roll width outside approx. 280 mm - Roll length 2 x 125 mm each - Roll diameter approx. to max. 100 mm - max. possible number of rolls 10 pcs - 7 pairs of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 760mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 760mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2295 / piece Number available: 12 pieces

Hydraulic round table FIBRO P10400UN with 3 jaw holder, for adaptations etc. division: 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96

Shaft side diamonds

We offer a retractable gravity conveyor for sale. It has minimum dimensions 2218 mm 8735 mm max. Width 610mm Technical data: Length retracted: 2218 mm Length extended: 8735 mm Width: 610mm Height: adjustable from 730-1040mm Rows of rollers: 67 units maximum load capacity: 400kg / M Net price: â?¬2050 / piece

Rieter Fine Rolling Mill - GSA 1,000800

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...

Various round-stroke tables with clamping elements, for conversions or adaptations, etc.

Yaskawa Motoman NX100 Robot Controller – Type ERCS-HP3XF-AE00 Industrial robot controller designed to operate high-speed 6-axis Yaskawa Motoman robots, including the Motoman HP3XF. The NX100 control system provides reliable motion control, advanced automation features, and flexible integration into industrial production environments. General Information - Manufacturer: Yaskawa Motoman - Controller Type: NX100 - Model Code: ERCS-HP3XF-AE00 - Compatible Robot: Yaskawa Motoman HP3XF Technical Specifications - Control Axes: up to 6 axes - Power Supply: typically 3-phase, 200–230 V AC - Programming Interface: full-color LCD teach pendant with intuitive menus Communication and Connectivity - Ethernet - Profibus - DeviceNet - Expandable digital and analog I/O ports Safety Features - Integrated industrial safety functions - Multiple emergency stop circuits Perf ...

2 pcs rotary actuators EUBAMA S20/10, each with rod loading magazine IEMCA T560, Spaenefoerderer KNOLL, hydraulic unit, linear supply WEBER, with part washing system Turbex 2000, spaen crusher system ARBOGA and much more

Yaskawa Motoman HP3XF – 6-Axis Industrial Robot Compact and high-speed 6-axis industrial robot designed for precise material handling, machine tending, assembly, and dispensing applications. The Yaskawa Motoman HP3XF offers excellent accuracy, flexibility, and reliability for automated production environments where space efficiency and precision are critical. General Information - Manufacturer: Yaskawa Motoman - Model: HP3XF - Robot Type: 6-axis industrial robot Technical Specifications - Number of Axes: 6 - Payload Capacity: 3 kg - Horizontal Reach: 1,375 mm - Position Repeatability: ±0.03 mm - Robot Weight (arm): approx. 32 kg Mounting Options - Floor mounting - Wall mounting - Ceiling mounting - This flexible mounting capability allows easy integration into different automation layouts. Protection Class - IP54 (robot body) - IP67 at wrist Controller  ...

Part table Eimeldingen S 630 ST with swivel axis

Complete processing cell with robot and ..., IRB 4400/45kg, ABB, used Top Special price ! This system is sold for an absolute special price of only 8% of the purchase price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this processing cell is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. Complete deburring cell from Protex: A workpiece is placed in the processing shaft from the outside. The part is clamped onto the fixture. The robot picks the correct tool from the tool storage location and begins processing. The built-in swivelling table can be used to rotate the workpiece and carry out a further machining step. The chips fall into a  ...

Robot with controller and accessories, IRB 4400/45, ABB, used Top Special price ! This robot is sold for an absolute special price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this robot is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. The system consists of: 1) Robot, ABB, IRB 4400/45 Type B M2000 Foundry version, 6 axes 2) Robot controller, ABB, type S4Cplus, 3) Schunk quick-change system SWK 040, 1x male 2x female 4) Control cabinet with 2 SCA-B4-70 10, E Motion servo amplifiers on the robot 5) All robot cables 8m and cabling of all devices with industrial plugs