ro used for sale

Size: 740 x 1040 mm Impression: 206 Mio. Equipments: Autoplate PPL (Power Plate Loading) CCI (Color Contamination Check) Max. sheet size: approx. (104 x 74) cm (40 x 29 inches) or (1020 x 715) mm

Turntable diameter: 1640mm, max. pallet height: 2000mm, max. film width: 500mm, max. film roll diameter: 300mm, max. film core diameter: 76mm, film thickness range: 17µm-35µm, max. roll weight: 20kg. Machine dimensions X/Y/Z: 2800mm/1650mm/2800mm, weight: approx. 450kg. An on-site inspection is possible.

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

5 Printunit Offset + Coater unit RCI + Color Pilot, APL full autom. all washer Inktemperature Control ELTOSCH TL/IR Dryer Grafix Hitronic, AirGlide Delivery special Grippers approx. 260 million impressions

Plant: Integrated raw material preparation for paper production Capacity (design): up to 1,550 t/day Lines: L1 280 t/day (HD pulper 26 m³), L2 550/700 t/day (LC pulper 70 m³), L3 160 t/day (mechanical), L4 160 t/day (broke), L5 160 t/day (chemical), FFD/UBC line 250 t/day UBC or 450 t/day mixed waste Brands & Core Units: VOITH: HD pulper 26 m³, VarioSplit, wire thickener, hot disperser, Integra screening (IntegraScreen/IntegraGuard) KADANT: Coarse screens (OS4/OS2, 1.8 mm), fine screens (0.15–0.25 mm), fractionation Cleaning/fractionation: Twister LC-Cleaner, OF8 (short fiber, 0.15 mm), MSS 10/10 & TL 100 (long fiber), Hidrodisk, EFK 1340, JYC 01/03 refiner Peripherals: WEIMA Shredder, PRESONA Baler Separation finenesses: coarse 1.8 mm / fine 0.15–0.25 mm Strengths: Multi-line layout, integrated reject/UBC processing, high flexibility for chemical, mec ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   to ...

General SKU212T477 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408 Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Information Mach.No.92214540915360000 Floorspace1x0,7 m CEcheck Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU212T487 LocationBarneveld MakeAPV TypeWA-35/55-380 Mach.No.92214540915360000 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m3/h With motor30 kW 380/415 Volt (ABB)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel Information Year of construction1997 Total height0,6 m Floorspace1x0,7 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Vibratory Finishing Bowl ROTO-FINISH ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

General SKU212T484 LocationBarneveld MakeAPV TypeW-25/200-380 Main Features MaterialStainless steel Volume300000 Ltr. Motor30 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity300 m³/h With motor30 kW 400-690 Volt (ATB Motortechnik)(Ex) Inletdia. 150 mm Outletdia. 100 mm Centrifugal Pumps MaterialStainless steel 1.4408 Information Mach.No.92214540915360000 Floorspace1x0,7 m Total height0,6 m Weight390 kg ATEX compatiblecheckCentrifugal PumpsAPV RosistaPumps > Centrifugal PumpsBrand > APV Rosista What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316W638 LocationBarneveld MakeBecker TypeVTLF 250 Mach.No.1408323 Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity250 m3/h With motor5,5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm Information Year of construction1996 CEcheck Floorspace1,10 x 0,65 m Total height0,70 mVacuum pumpsBecker Vacuum PumpsPumps > Vacuum pumpsBrand > Becker Vacuum Pumps What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU400W1243 LocationBarneveld MakeRousselet TypeEHBL 1053 DRGJ No.00313 Year of construction2002 Main Features MaterialStainless steel Motor30 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 dm3 Basket sizesDia. 1050x680 mm Max. loading weight265 kg Motor30kW, 400/690V, 1480 rpm Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN40 Solids outletDN150 Liquid outletDN150 MaterialStainless steel 1.4435 (316L) Information Mounted on foundation platecheck With switchgearcheck Total height2,25 m Weight8365 kg ( total 14.000kg) Floorspace2,55x2,05 m Extra SpecificationsInside container, total dimensions 6,0x3,15 m, on steel frame total weight approx 14.000 kg Peeling centrifugesRousseletCentrifuges > Peeling centrifugesBrand > Rousselet What you can expect f ...

General SKU068B368 LocationBarneveld MakeRomicon (filter) TypeCTG 3 HF (Hollow Fiber) 21-75 PM-500 Year of constructionunknown Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filter/Rotary pump (1x) Information Mounted on wheelscheck Floor space1,1x0,7 M Total height2,1 M Weight200 KG Extra Specifications- Sanitary Rotary Pump make Nakamura Japan, type 25 VT-D Size 1,5 motor 0,75 KW, 220/380 Volt, with frequency inverter Miscellaneous filtersRomicon NakamuFilters > Miscellaneous filtersBrand > Romicon Nakamu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU386W1189 LocationBarneveld MakeWipotec / OCS TypeSC 3000 C Mach.No.1100113 Main Features MaterialStainless steel Motor2.4 KW Specified Features - Miscellaneous MaterialStainless steel 1.4301 (304) CapacityScanning speed 50m/min Motor2,4 kVA, 230 volt CapacityMax transport weight 10 kg Information Year of construction2011 Total height2,10 m CEcheck Floor space2,10x1,20 m Weight450 kg Extra SpecificationsIn and output belt conveyor, dimensions 270x1800 mm, X-ray tube, type MIR-160 HP/20 Touchscreen monitor control camera system Reject unit with 3 magnetic keys for different machine access levels. MiscellaneousWipotecMiscellaneous > MiscellaneousBrand > Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU410S986 LocationBarneveld MakeRotamil TypeSolvent recovery No.100071 Year of construction1991 Pressure Working pressure6 Bar Specified Features - Distillation Distillation installationcheck Capacity900 Ltr. (2x 450 Ltr.) Vessel sizesdia. 800x1350 mm Max. temperature200 Degr. C. With condensercheck Condenser sizesdia. 500x100 mm MaterialStainless steel Information Mounted on framecheck Total height2,9 m Weight3000 Kg Floorspace3,4x2,3 mDistillationRotamillColumns > DistillationBrand > Rotamill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU339W1459 LocationBarneveld MakeRobert Jenkins TypeGEKBL No.020055 Year of construction1990 Pressure Working pressure5.17 Bar Working pressure shell5.17 Bar Working pressure tubes5.17 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface3.4 m2 Size length500 mm Sizes width500 mm Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Heating surface3,4m² Max. temperature165°C Shell length500 mm Shell connectionscheck Heat exchangers Plate heat exchangersBlock heatexchanger Max. temperature165°C Information Total height0,55 m Weight400 kg Floorspace1,0x0,80 m Extra SpecificationsBlock heatexchanger. this item was refurbished in 09-2002. Shell and tube heat exchangersRobert JenkinsHeat exchangers > Shell and tube heat exchangersBrand > Robert Jenkins What you can expect from Foeth: -- Machin ...

General SKU339W1462 LocationBarneveld MakeRobert Jenkins TypeGEKBN7 No.G2081A Year of construction1992 Pressure Working pressure7 Bar Working pressure shell7 Bar Working pressure tubes7 Bar Main Features MaterialGraphite Shell (Material)Mild steel Tube (Material)Graphite Surface14 m2 Size length550 mm Sizes width540 mm Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Heating surface14m² Max. temperatureunknown Shell length550 mm Information Total height0,75 m Weight640 kg Floorspace0,80x1,00 m Extra SpecificationsInput DN50, output DN100Shell and tube heat exchangersRobert JenkinsHeat exchangers > Shell and tube heat exchangersBrand > Robert Jenkins What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcom ...

General SKU250X208 LocationBarneveld MakeRovema TypeKSL No.2603 Year of construction1970 Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialStainless steel 1.4301 (304) Powder fillercheck Bag fillercheck Number of dosing heads:8 Capacity40 p/min With motor0,18kW, 400 volt With hoppercheck Information With switchgearcheck Total height2,35 m Weight520 kg Floorspace1,20x1,80 m Extra Specificationsbag size max 950 ml Technical specs Extra informationmax bag size 250x160 mm Powder fillersRovemaPackaging machines > Powder fillersBrand > Rovema What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU316X529 LocationBarneveld MakeJäckering TypeUnknown Main Features Motor30 KW Inlet diameter170 mm Width550 mm Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Fine Impact Mills Grindercheck Rotor size530 mm (4 rotors stacked) Grinding room sizeDia 540 mm x 700 mm With grinding platenscheck With hoppercheck 250x250x240 mm InletDia. 170 mm Feeding with vibro feedercheck Motor30 kW, 400/690 volt, 1465 rpm Speed2500 rpm Information Year of constructionUnknown Mounted on framecheck With switchcheck Floor space2,10 x 0,80 m Total height1,70 m Weight1800 kg Extra Specifications- With screw conveyor, 0,37 kW, 230/380 volt, 695 rpm - estimated output 150 kg/h: water evaporation ± 60 kg/h Fine Impact MillsJackeringMills > Fine Impact MillsBrand > Jackering What you can expect from Foeth: -- Machine is in working condition -- At a r ...

We offer a refurbished rotary lobe blower Brand: Robuschi Type: K 150 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight:  14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

drum diameter: 382 mm drum height: 250 mm filling amount: 40 kg wall thickness of drum: 13 mm drum revolutions: 2850 U/min Capacity: 800 l/h voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1,90 x 0,70 x 1,65 m Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5.144,65 h - Timer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Croissantroller Rondi Stainless steel Tabletop appliance for the efficient production of croissants Easy to use for unfilled croissants simple, robust technology only DGUV V3 tested by us Output up to 700 pieces/hour Connection 400V, 200 Watt, 16A-CEE plug Dimensions: 300 x 450 x 270 mm, DxWxH As good as new / used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Driving table E-Box Maintenance contract Delivery Instruction and commissioning

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

table length: . mm table width: . mm burner heads: . : 2 total power requirement: . kW weight of the machine ca.: 1478 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EDM machine Type: Robocut Alpha C600ia Manufacturer: Fanuc Year: 2014 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 300 mm Including clamping, 3D vice and filters Deionization 50L Machine in good condition, fully functional, under power Find more here - / Contact us at -

ROMACO NOACK BLISTER PACKAGING LINE, UNITY 300 Year of construction: 2022 Packaging line composed of a single-track blister machine with rotary sealing and a continuous motion cartoner. Modular line ready to be connected to different track & trace systems and end of line packaging solutions. PRODUCTION - Output blisters/minute: 300 max. - Output cartons/minute: 10 – 300 (min-max) - Forming cycles/minute: 100 max. - Die-cutting cycles/minute: 300 max. - Foil width max: 165 mm - Forming area max: 190 × 150 mm - Die-cutting area max: 100 × 150 mm - Forming depth max: 12 mm - Forming material reel diameter max: 700 mm - Lidding foil reel diameter max: 300 mm - Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS - Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm - Weight (approx): 5,300 kg  ...

Planing machine / finishing machine Manufacturer: Marunaka Model: Royal FX Squeegee Blade Bottom Cutting width depending on the cutting angle max. approx. 250mm Workpiece height max. 180mm 2 machines mounted on trolleys.

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

Reference Num.: 4348 Brand: MAN Roland Type: PR 01 Construction year: 1990 Impressions: 9 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 10,000 sheets/hour Printing units: 1 Machine size: Length: 1,720 mm, Width: 1,450 mm, Height: 1,605 mm Total weight: kg 2,190 / lbs 4,828 Power: KW 7 / hp 7

• Machine set up for ampoule labelling • With new format sets, also suitable for cylindrical objects such as vials or cartridges • Suitable for ampoules of 1, 2, 3, 5, 10, 20, 30 ml • Output: 12,000\endash27,000 ampoules/hour • Label processing range: min. 25 x 10, max. 110 x 78 mm • Label roll diameter 400 mm • Inclined belt infeed magazine for cassette filling • Label presence check with luminous sensor • Allen hot printing device, type holder 5 lines • Scanware camera for 100% print control • Scanware camera for colour ring control • Automatic reject ejection with counter-check • Inline outfeed to downstream tray packaging/cartoning machine • With format sets for 1, 2, 3, 5, 10, 20 ml ampoules in accordance with DIN EN ISO 9187-1 • Modem for remote monitoring • Electronic batch protocol with audit trail • 21 CFR Part 11 compliance • Beckhoff service ...

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

Total Bakery Three roll sheeter 2020, stainless, three roll sheeter, mounted on stainless conveyor, roller width 230mm, variable speed rollers and variable speed conveyor, on mobile frame, 3Ph

Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.

Key data: 400 mm, 400 mm

1 Fixed stick/steady rest with roller quills for SUI 80 As good as new 400 mm passage

Roll Fed OPP Hot-Melt Labeler Rollmatic 540 – High-Speed Rotary Labeling Solution for Cylindrical Bottles The Rollmatic 540 roll-fed automatic rotary labeler is a powerful, high-performance rotary OPP labeling machine engineered for seamless wrap-around label application on cylindrical containers. Designed and manufactured for industrial bottling lines, this system applies plastic film OPP labels using hot-melt adhesive applied to both label ends for a clean, durable, and precision-aligned finish. Labeller has one dual-roll label feeding station for film reels, roll change is manual. The plates are rotated by a toothed belt, ensuring smooth and consistent motion. For precise label application, the machine is equipped with an alignment system that automatically corrects even the slightest deviations, keeping the film perfectly horizontal. The machine is supplied with change parts  ...

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Description: Single-chamber car wash Type: ROBOMAT 2 Factory number: 7441 Condition: mint condition, no visible defects, rarely used Buyer must dismantle and transport parts washing machine in the workshop area himself.

Ref. 514 Impact Scissors "ROBUST" Cutting length 120 cm Table: 120 x 72 cm Weight: 350 KG Condition: Used machine / Tested / Functional Ref. 514 Guillotine Shear 'ROBUST' Cutting length 120 cm Table: 120 x 72 cm Weight: 350 kg Condition: Used machine / Tested / Functional

Sales stand/snack bar/container Year of manufacture not known incl. various equipment Dimensions: Length 3500mm Width 2400mm Height 2600mm Weight approx. 2500kg - The equipment and the container have not been cleaned or tested.

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

Hinged belt conveyor curve, driven – used - Price from location: 950.-€ (net) dismantled, packed and loaded! Manufacturer: Röwe Type: APSB106M Year of Make: 2011 Hinge strap width: approx. 30cm Element width: approx. 35cm WA 80695 V 10-50 M/Min P: 0.55 kW Condition: good Available: immediately Location: Frankenberg camp / Saxony

diameter: 315 mm bore: 89 mm dimensions of the machine ca.: m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Working Description: Automatic Push-O / Press-On 3-head capper suitable for plug caps (please see photos) with an output up to 90 caps per minute (depending on cap type and bottle being processed). Stainless steel fully guarded construction, lastly used with jars of 29.5mm DIA and with caps at 19mm DIA (12.5mm neck) + 16mm cap height + 11.6mm cap height. Stainless steel construction 720mm DIA rotary cap sorter with Perspex cover and lid. Comes with two additional sets of format parts including star wheel and guides. Suitable for Pharmaceutical, Cosmetics, Nutrition, Contract Manufacturing, Food, Medical Devices, Chemical and others. Technical Information: Size (machine): L: 3000m ...

The AutoDoor ADxxxC is a customer-specific version with cylinder function. The stroke is precisely adapted to the machine model. This model is particularly suitable for special applications where a classic electric hoist drive is not sufficient. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrated into the product as standard. - Full safety classification according to EN ISO 13849-1 performance level PL d. - Connections are available on both sides and  ...

Dimensions (L/W/H): 2100x1250x1750 mm weight: 700 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4000x2900x2100 mm Weight: 2500 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x2900x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x3100x2200 mm Weight: 3650 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.