ro used for sale

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: HSM , Type: Rotationsquerschneider, Year: 2012, Control: Siemens, Längenogabe: yes, Stückzähler: yes, Cross cutting guillotine: yes, Cutting lenght mm: 1.500 - 2.620, Schnittbreite min-max mm: 600 - 2.100, Abstapelung der Funierblätter: für Folien, Hebebühne: yes, machine ready for demonstration: yes, FREE TEXT: Anlage wurde um einen UV Strahler und ein Kühlaggregat erweitert/ Vorschub max.40 Meter, Year :2012

Manufacturer: Robatech, Type: Coceptb 5/4, Year: 2006, FREETEXT1: Wachsauftragsgerät , FREETEXT2: mit Düsensystem , FREETEXT3: für Wachsversiegelung, FREETEXT4: inkl. Düsen und Halter, Year :2006

Manufacturer: Cefla, Type: ROC 2, Year: 1994, Work piece width min-max mm: 1300, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2 x 2, Farbkreise: 2, Schnellwechselsystem : yes, Laquer recharging: yes, Transportsystem Band: yes, Year :1994

Manufacturer: Cefla Rotorstain, Type: Rotor, Year: 2005, Control: Cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, work piece detection: yes, Conveyour system: Band, Spraying stations: 16, Schnellwechselsystem : yes, Gun carrier: 16, Pumps: 2, Laquer system - airless: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Manufacturer: Biesse Model: ROVER A FT 1224 CNC Year of Manufacture: 2021 Type of Machine: Numerically Controlled Machining Centre Operating hours: 1238 h Spindle / 42 h Drill heads Power Supply Voltage: 400 VAC Full Load Current: 53 A Number of Phases: 3 Power: 31.20 kW Frequency: 50 Hz Short Circuit Rating: 10 kA RMS Sym Table size 2500 x1250 The worktable measures 2,500 x 1,254 mm Programming via bSolid incl. nesting module Tool magazine with 13 slots and drill magazine with 10 slots No grooving saw available Find more here - .ucymachines/ Contact us at - sales@ucymachines

1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

Manufacturer: Rösler Model: RWH 6/12-2 Year of Manufacture: 2007 Voltage Supply: 400V / 50Hz Nominal Power Input: 32 kW Nominal Current Input: 64 A Motor Power: 11 kW Motor Current: 20.5 A Control Circuit Voltage: 230 V Frequency: 50 Hz CE Certified: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used Robopack Ariane 4535ZT foil wrapper. "L" type sealer with integrated shrink tunnel.

tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MIWE rack oven Roll-in Medio Baking tray size 60 x60 electrically heated Heating capacity 41.7kw Control DUS

Key data: 3060 mm, 1260 mm, 150 mm

SPECIFICATIONS: Workspace: X: 3060 mm Y: 1260 mm Z: 150 mm 03 Axles Automatic lubrication system 06 ATS tables (length: 1200 mm) 018 Track rollers 06 rear stops 06 stops at height 970 mm Side stops (2 right + 2 left) 04 Bar lifter Turret tool magazine with 10 places 01 Drill head BH 21 L (7x+7y vertical - 4x+2y horizontal - x-axis knife) 01 Air Cooled 12kw Electrospindle HSK F63 Coupling 01 Becker vacuum pump: 100 m³ SYSTEM: Biesse Works XP600 Controller EQUIPMENT: Carpets and barriers Various tools

110 Tons Press Machine 70-55 table size, 48-33 between colons with PLC Hydrolic

90 EXTRUDER 200/600 KG CAPACITY WITH PLC

Eylets punchining machine. In production ready condition. With extra repromaterial.

Motorised roller table 19.3000mm year 2007 consisting of: 2 x roller tables 1300x6000mm 1x roller table 1300x4000mm 1 x roller table with longitudinal roller guide 1300x 3300mm Working width 1,300 mm Frame: painted steel frame Castors: 30 mm plastic disc castors, white Roller spacing: approx. 50 mm Stopper: spring-loaded disc stopper Legs: adjustable H-legs, height descending 900>800 mm adjustment +100 mm CE documentation ADDITIONAL: Frequency inverter for speed control

Size: Equipments: 40 nozzles for consistent adhesive application

thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Rohb Model: RKA86 Year of Manufacture: 2007 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 4 , 14 mm

Multiple drill head from Romai, Sigloch & Schrieder up to diameter 14 mm in steel 4 stations, automatic and manual switching 2 speed ratios choiceable (direct and reduced) incl. adapter MK 4 and flange

: 1000 x 600 mm magnetic plate size: 1000 x 600 mm grinding height: max 400 mm grinding wheel width x diameter: 400 x 60 x 127 mm dimensions: 3900 x 20 50 x 2400 m : ja weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,19 t dimensions of the machine ca.: 1,2 x 0,75 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1000 mm : 1000 mm : 1200x1000 mm saw band length: 11300 x 80 x 1,3 mm table height: 790 mm band speed: 14 - 60 m/min total power requirement: 18 kW weight of the machine ca.: 9,0 t dimensions: 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are drive ...

welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage,  ...

connected load frequency: 230 V weight: 4,7 kg range L-W-H: 620 x 240 x 180 mm output: 0,8 KW grinding band dimension: 40 x 760 mm tube diameter max.: 180 mm band speed: 2,4 - 9,1 m/s Pipe grinding/finishing machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hardened Base Jaws 315 mm Roehm

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.

Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling) | film width: 170-560mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/7.5kW | 6bar, 0.25m?/min | machine dimensions: L1500xW1200xH1620mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machine ...

Cellophane wrapping machine. Caroussell technology for larger sized products and fast packaging. - Technical specifications: max. speed of the machine in neutral: 65 cycles/minute | product dimensions (mm): L(70-220)xW(30-140)xH(12-80) - (W+H

Cellophane wrapping machine. Caroussell technology for middle sized products and fast packaging. - Technical specifications: max. speed of the machine in neutral: 100 cycles/minute | product dimensions (mm): L(40-160)xW(20-100)xH(8-45) | 380V, 4.5kW | compressed air not necessary | machine dimensions (mm): L2000xW790xH1550 | weight (net/gross): 930/1030kg. 1 tool/format included, tear tape dispenser included, infeed conveyor included Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

used rack oven Miwe Roll-in RI 1.0608-TL electric, overhauled, with hood, with touch display, electrical, electrics rewired, new seals, circulator restored, 72.6 kW, 400 V, 50 Hz, Ser.-Nr. 47 707 Pictures during the overhaul. For newer pictures, please ask.

90 mm Extruders Machine, 2024 Model Gearbox: YRE2430XEİ: 18.67 Motor: Gamak brand, 30 kW, 1470 RPM Transmission: Belt / Pulley Overall Dimensions: 2700 mm / 1500 mm Production: Made in Turkey, 2024

EX-225 L/D 1600/225 Extruder Gearbox: Farrel Motor: Gamak brand, 110 kW, 1480 RPM No TCU No Control Panel Transmission: Belt / Pulley Dimensions: 4000 / 1800 / 2500 mm Production: Made in USA Extruder with Hot Feed

EX-120 L/D:1600/90 Gearbox: Leyond Motor: Gamak, 37 kW, 1475 RPM TCU: None Control Panel: None Transmission: Belt - Pulley Overall Dimensions: 2700 x 1800 x 1500 mm Production: Made in ENGLAND

It is a used Kemper head machine Quadro-Round for sale. The machine is functional. For the production of rustic, square and round buns. Price on request.

Rondo Croissant Line Type SCM 50.A10 Year of construction 2017 with foldable infeed table incl. punching tool 3-r 20x15cm Slitters and pressure rollers with mobile wrapping unit - Tested and cleaned - Belts winding unit renewed

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

Heidelberg roller feeder, machine number 160612, machine is in good condition, immediately available Iebr Sevvifieb Ta Eoau If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

L/D : 1500/90 REDUCTOR LEYOND MOTOR : VEM MOTOR 1470 D/DK 1 UNIT TCU NO PANEL BAND PULLEY TRANSMISSION GENERAL DIMENSIONS: 2300 1500 1900 ORIGIN: ITALY

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - .ucymachines/ Contact us at - sales@ucymachines

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, , Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.

RODEA hydraulic folding clamp mod. S - CE standard - Year 2002

Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...