rm used for sale

Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Dear Sir or Madam, for you in the offer : Granulator/cutting machine available directly from stock! Can be used in cable processing/cable recycling, plastic shredding and destruction of plastic and plastic parts Granulator/Granulator/Granulator Type: RMH 16/22 VGA _ 4 KW Drive Power (See table for more data) Other granulator/cutting machine on request) RMH 16/22 VGA/drive power: 4 KW Features RMH Granulator: - A knife set is installed in the RMH Granulator RMH. - A sieve insert is installed (perforation as desired.). - The following screen inserts are available in stock: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm - V- Section Geometry - Lenze Electric Motor / Schneider Electric Box and Circuit Breaker - Easy tilting of the filling hopper - Available with wheels/2 x fixed castors/2 x brake rollers or adjustable rubber-mounted feet - Available with different bays 1) ...

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Selectomat System Schlatter RMB EMBA 18

Reference Num.: 4408 Brand: RMGT Type: 970ST-5+LED Construction year: 2022 Available: directly Status: In production Location: USA Printing units: 5

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

Dosing container 10.5m³ capacity Steel grade S355 Overall channel low-stress annealed 10mm Hardox 450 wear protection in the gutter bottom 2 x Unbalance Motors Various hood options, possibly with extraction connections Electrically driven slide for dosing For material eg: copper and plastic according to photo, but with drive and painted Other options: 3-Sided Wrap Guard 400mm Hood according to drawing Control box for stand-alone operation, with FU without Hardox wear protection Channel without container, frame, etc., incl. drives Reserve drive

Container facility consisting of: = 8 pieces of mobile space elements, dimensions 6,058 x 2,438 x 3,000 mm, IH 2,500 mm, 2 pieces of mobile space elements, dimensions 4,891 x 2,438 x 3,000 mm, IH 2,500 mm - with all electronics, heating, kitchen, etc. - Built in 2018 and was used for 4 years gas heating has been installed in the equipment. In addition, there are two air conditioners

Sourdough plant with cooling ThörmerManufacturer : ThörmerType: TSHKWA 4001With built-in own aggregate Condition: Not tested must be checked completelyDetails see pictures.Payment: Bank transfer or cash payment

Sourdough plant with cooling Thörmer Manufacturer : Thörmer With control and unit a scale Kettle 1 Outer dimensions : Diameter 105cm Height 200cm Inner dimensions: Diameter 78cm Height 82cm Dismantled ready for collection Bakery condition Details see picture

Sourdough plant with cooling Thörmer 3 pieces Manufacturer : Thörmer With control and 3 pieces unit Flour scale some scale Kettle 1 Outer dimensions : Diameter 125cm Height 190cm Inner dimensions: Diameter 98cm Height 120cm Kettle 2 Outer dimensions : Diameter 98cm Height 210cm Inner dimensions: Diameter 88cm Height 122cm Kettle 3 Outer dimensions : Diameter 80cm Height 145cm Inner dimensions: Diameter 76cm Height 63cm Dismantled ready for collection Incl, Flour hopper and control baker condition Details see picture

diameter range 15,6 mm high-tensile 14,1 mm capstan diameter 900 mm drawing speed 16 m/min output 1500 kg

diameter range 8 mm drawing speed 19 m/min mild steel 9,5 mm high tensile 8 mm capstan diameter 600 mm drawing power 1400 kg

only the draw drum diameter range 11 mm capstan diameter 700 mm clear width 150 (160) mm

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

Rated power up to 300 kg/h engine power press 1.5 (2.0) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50 Hz (3 phases) Electrical fuse 16 A Laenge 1200 mm width 1000 mm He 1880 mm Basket and juice tray in 1.4301 / AISI 304 press force 24.2 to Press pressure 380 bar Juice yield up to 65% Connection for juice drain 30mm High juice drain 525 mm Hoehe Marc ejection 585 mm Supplied 1 press bag 100l, 3 insert huellen 48cm, 3 Press inserts made of acacia wood 48cm ; New machine - best condition

- replaceable stainless steel sifties for adjusting the grinding unit - food-grade - self-sufficient use or mounted directly on pre-basket presses nominal power up to 650 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A La 496 mm width 434 mm He 885 mm He he with frame 1360 mm Hehe Assumption 1360 mm Weight 28 kg weight (without / with frame) 28 / 42 kg material 1.4301 / AISI 304 Hoehe mash release 690 mm Supplied cutter 8mm ; New machine - best condition

- Adjustment of the grinding unit - for the crushing of various fruit varieties food-grade nominal power up to 1000 kg/h engine power 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 532 mm width 519 mm 1151 mm Hehe with frame 1532 mm He he Assumption 1532 mm Weight 45 kg weight (without / with frame) 45 / 59 kg material 1.4301 / AISI 304 Hoehe mash release 666 mm Supplied New machine - best condition

- for the production of mash - easy operation and easy cleaning nominal power up to 4200 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Laenge 7 30 mm width 690 mm Hoe 1410 mm Height assumption 1410 mm Weight 88 kg material 1.4301 / AISI 304 Hoehe mash release 470 mm Supplied New machine - best condition

Schraegaufzug SA200 with swivelr raetzmuehle RM2,2 - Use with or without raetzmuehle without conversion work possible nominal power up to 1000 kg/h motor power Elevator 0.37 (0.5) Muehle 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 2620 mm width 700 mm Height 2100 mm He he Assumption 800 mm Weight 185 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 internal connection for washing mm Supplied cutting sieve 9 and 16mm ; New machine - best condition

Wash waer WA LC40 with Raetzmuehle RM40 for belt press EBP420, EBP500, EBP580 rated power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm He 220 0 mm Height he acceptance 800 mm Weight 280 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside connection for washing 2 outside He mash release 1250 mm High fruit delivery 800 mm 9mm and 12mm snow ; New machine - best condition

Wash wa lund WA LC40 with raetzmuehle RM40 for packing press 180p2 Nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 700 mm Maximum 2400 mm Hoehe Assumption 800 mm Weight 290 kg material 1.4301 / AISI 304 Connection for cleaning 1/2 internal Connection for washing 2 unless He mash release 1460 mm Maximum fruit release 800 mm Scope 12mm Cutting sieve ; New machine - best condition

Luenette, bezel, self-centering luenette PAGUS RMB 5 644 599 ID. NO.: 28691.20 max. clamping diameter: approx. 300 mm foot: 173 x 78 mm used ! Dimensions: 1200 x 520 x 80 mm

Pressure relief valve, relief valve NORGREN V64H-NND-RMN p: 0.4 - 10 bar t max: 80 °C connections: 2x Ø 15 mm, 1x R 1/2 inch New !' Dimensions 210 x 75 x 75 mm

Centrifugal Pump, Magnetic Drive Pump, Water Pump FRIATEC AG RMKN 65/250 Q = 120 m3/h H = 60 m Motor SIEMENS: 55 KW, 2970 rpm 400 / 690 V New ! Dimension 1650 x 750 x 730 mm

https://archiv.rme-audio.de/en/products/fireface_ufx.php Sale with the following accessories: - 1x IEC connection cable C13 Auction-ID: A7-45172-22

A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18

https://rme-audio.de/de_fireface-uc.html Sale with the following accessories: - 1x power adapter - 1x MIDI breakout cable - 1x USB-A > USB-B - 1x Toslink cable - 1x Software CD - 1x manual Auction-ID: A7-45172-21

TOP✨Fluke 376 FC✨True RMS Clamp Meter Clamp Meter Clamp Meter Multimeter Current Clamp Meter Mint condition Auction-ID: A7-45427-70

TOP✨Fluke 376 FC✨True RMS Clamp Meter Clamp Meter Clamp Meter Multimeter Current Clamp Meter The device is as good as new Auction-ID: A7-45427-60

Rated power 3000 up to 8000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3570 mm width 980 mm High sof 2570 mm 490 kg material 1.4301 / AISI 304 Connection for cleaning HD M22 x 1.5 or G 1/2 Ag connection for washing room 1/2 outside He he mash release 1460 - 1620 mm Height fruit delivery 1460 - 1620 mm ; New machine - best addition

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Togethe ...

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics  ...

Auction-ID: A7-45419-13

Auction-ID: A7-45419-12

Auction-ID: A7-45452-124

Engine number: M1112C4 Press force: 80,000 kg (~80 tons) Flywheel speed: 60 RPM Strokes per minute: 60 Maximum stroke length: 115 mm Minimum stroke: 5 mm Maximum stroke: 130 mm Safety Component: Brand: SKF Multitec B.V. retrofit/safety component Type: ATCON press protection safety upgrade Series: 3001/02 Year of construction: 1992 Max air pressure: 5 bar Auction-ID: A1-41990-112