129,264 used machines on RESALE, but how to find them? Machine Search
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston rod: Ø 25 mm -Stroke: 100 mm -Dimensions: 95/95/H310 mm -Weight: 6.1 kg
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 2000 G 26 F Engine No.: 544101778 Power: 709 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HC 634 G Gene. No.: 23011477 Generator power: 810 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.050 Height approx. mm: ...
Pester PEWO-pack 800 shrink packer für bottles/aerosol cans, right-angled infeed belt with grouping station, sealing width max. 800 mm, product infeed width max. 850 mm, product infeed length max. 350 mm, product infeed height max. 250 mm, capacity up to 25 collations per minute, electrics 400V/50-60Hz, power consumption 16.8 kW, operating pressure 5 bar, machine net weight approx. 700 kg, previously used for packing aerosol cans
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: RM/8080 R -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. Pressure: 16 bar -Stroke: 100 mm -Price: per piece -Number: 4 pieces -Dimensions: 92/92/H320 mm -Weight: 3.45 kg
Electric motor, three-phase motor -Power: 2.2 kW -Speed: 2880 rpm -Shaft: Ø 25 x 40 mm -Protection class: IP 44 -Dimensions: 410/225/170 mm -Weight: 24 kg
Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: 167-05 5000-1 -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Max. Pressure: 16 bar -Stroke: 1150 mm -Dimensions: 75/75/1340 mm -Weight: 9.6 kg
Sight glass, inline sight glasses, disc valve, butterfly valve, ball valve -Sight glass: 805 x 25 mm -Dimensions: 930/58/H52 mm -Weight: 15 kg
This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 93 mm -Stroke: 800 mm -Total length when retracted: 985 mm -Dimensions: 985/93/H93 mm -Weight: 32 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 115 mm -Piston diameter: 50 mm -Number: 6x available -Price: per piece -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/piece
electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik
Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 60 mm -Piston diameter: 40 mm -Quantity: 5 available Price: per piece -Dimensions: 255/55/H80 mm -Weight: 1.1 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm -Number: 2x available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece
transformer -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Number: 6x available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece
Data sheet Retrofit Pos. Tr 015 TRANSNORM strap foerers 800-600-500 Type TRANSNORM TS 1100 Laenge strap foerers 800 mm Total width 600 mm Strap width 500 mm Strap type E 8/2 gruen Drive station COMPACT Drive drum motor Type: TM 113 B25-434 Z, FU preprepared Power: 0.25 kW Voltage: 230/400 V, 50 Hz Foder speed 1.03 m/s Stuetzen without hustle and craps, please request if necessary Functional, visually good condition Features: condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: Van der Graaf Trommelmotor Ampere: 0,71 Conveyor speed m / s: 0,02 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung ...
Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width ...
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1370 rpm -Shaft: Ø 18 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 340/201/H160 mm -Weight: 10.6 kg
Roller conveyor, conveyor belt, roller track -not powered -Roller width: 800 mm -Total width: 850 mm -Roller Ø: mm -Roller conveyor height: 650/770 mm -fixed part: 3000 mm -movable part: 1000 mm -Transport dimensions: 3000/850/H800 mm -Weight: 110 kg
Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016 ...
Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe
Ref. -No.: 10036 Manufacturer: JOHNFORD Year of construction: 2009 Type of control: CNC Control: Fanuc Series 18i-TB Storage location: Halberstadt Country of origin: Taiwan Machine length: 9800 mm Machine width: 3695 mm Machine Height: 5292 mm Weight Of The Machine Ca.: 32,6 t amount of positions: 12 Bar passage: 165 mm Serial no.: TDF9007 Turning Length: 2000 mm Turning Diameter Over Bed: 1550 mm Swing Diameter Over Bed Slide: 1270 mm Longitudinal Travel (Z-Axis): 2000 mm Spindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mm Spindle Bore: 185 mm Spindle power: 37/30 kW Cross Travel: 685 mm Spindle Speeds: 1000 RPM Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 12 m / min Tool changer: 12 Pcs
electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA3280M-BB024-050 -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Number: 25x available -Price: per piece -Dimensions: 275/156/H205 mm -Weight: 10 kg
electric motor, three-phase motor -Power: 0.55 kW -Speed: 1410 rpm -Shaft: Ø 19 x 40 mm -Design: B3, explosion-proof -Protection class: IP 55 -Quantity: 1 available -Dimensions: 320/163/H255 mm -Weight: 24.1 kg
MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 940 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 280/230/H200 mm -Weight: 14 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 430 mm -Total length extended: 590 mm -Number: 4x available -Price: per piece -Dimensions: 95/95/H430 mm -Weight: 4.9 kg
Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder -Stroke: 260 mm -Piston diameter: 80 mm -Piston rod: 18 mm -Total length: 610 mm -Total length extended: 870 mm -Weight: 6.55 kg/piece
Ref. -No.: 10373 Manufacturer: SORALUCE Year of construction: 2017 Type of control: CNC Control: Heidenhain 530i Storage location: Halberstadt Country of origin: Spanien X-Travel: 6500 mm Y-Travel: 1600 mm Z-Travel: 900 mm Table-Size (Lxw): 8000 x 900 mm Drive power spindle: 28 kW Swivel range milling head: 2,5 ° Tool Taper: SK 50 Feed rate: 15000 mm / min Further information: - Number of axes = 3 + 2 - incl. Swivel head
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2800 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 275/190/H155 mm -Weight: 12 kg
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg
electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg
Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4
Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg
Horizontal hydraulic baling press, with manual tying, brand: Faes, bale size: 0.80x0.60 m, material inlet mouth: 1.15x0.75 m, engine: 10 hp.
Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 80 x 160 mm -Number: 1x recordings available -suitable for: tool changer -Price: per piece -Weight: 9 kg/piece
Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg
x-travel: 1250 mm y-travel: 910 mm z-travel: 875 mm Control: Siemens type: 840 D size of pallet: 800x800 mm numbers of pallets: 2 turning speeds: 20-6000 U/min transmission ratio: 2 Feed: 1-32000 mm/min : 360x1 ° turning speeds: 16,5 U/min Table load: 1150 kg spindle taper ISO: 50 Tool changer: 165 Pos. total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).
Gear motor, electric motor, electric gear motor -Speed: 76 rpm -Power: 0.55 kW -Construction: bevel gear B5 -Diameter hollow shaft: 25 mm -Rezess: Ø 70 mm -Hole spacing: 55 mm -Protection class: IP 55 -Dimensions: 355/210/H155 mm -Weight: 15 kg
chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300
Gear motor, electric motor, electric gear motor -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg
Line filter for frequency converters -Manufacturer: Corcom -Type: 80FCD10B -Number: 1x filter available -Price: per piece -Dimensions: 310/170/H140 mm -Weight: 8 kg
Key data: 800 mm, 600 mm, 600 mm
Machine Details Stock-No. 1105-03955 Type of machine Machining Center - Universal Make HERMLE Type C 800 U Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 800 mm y-travel 600 mm Z-Travel 500 mm control TNC 426 HEIDENHAIN turning speeds 15000 1/min taper ISO ISO 40 tool change unit 98 spindle 15 kW Additional information 5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS flush gun, lots of accessories,
impressions: 0 Mio. max. printing speed sheets: 1800 /h max. paper size: 30 x 45 cm max. speed: 1800 in A4 /h max. speed: 900 in A3 /h serial no.: 280000960 Dimensions (L/W/H): 180/105/170 cm weight: 450 kg digital printing system for colour prints The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
