rm 80 used for sale

This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

pressure: t plate thickness: mm no. of strokes: Hub/min total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale ype : Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 06 Dec. 2025 Description meat pad, fruit pad, food pad , surgical mask production line The 3-ply mask production system offered here combines efficiency and safety features with a first-class mask of type II / IIR optimized for high wearing comfort. The integrated extra module "Single Pack" enables the mask production machine to pack each mask individually wrapped at full speed of up to 800 masks / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. The mask is made up of 3 layers of non-woven material: - An outer layer of spunbond - A meltblown filtratio ...

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

Transnorm conveyor belt GF 800-600-500 RA2431 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1.42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 1,42 scope of delivery: without supports and s ...

This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information.

Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used

This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

Telescopic Belt Conveyor/Telescopic Conveyor/Conveyor Belt -approx. 22.8 meters length Manufacturer: Caljan Condition: very good, used Model Type: CB4H 7.5/15.3-800 Serial No.: 204279 Year of Make: 2017 Drive: Hydraulic Total length retracted: approx. 7500 mm Total length extended: approx. 22800 mm Total width incl. control cabinet: approx. 1650 mm Total width without control cabinet: approx. 1200 mm Belt width: approx. 800 mm Strap type: smooth Conveying height incl. feet: approx. 970 mm Including control cabinet Circuit diagrams included Internal Article Number: 2026020801 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, b ...

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Milling machine Röders RXP 800 DS BJ "007

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack trusses, used Material colour: grey INP profile: 80 x 42 mm Truss Type: TRV1-180-08-I Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 2,700 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

General SKU347X811 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m² Number of sieve decks:1 Sieve sizes810 mm With covercheck Inletø 200 mm Outletø 215 mm Drive vibro motorcheck Motorcheck 380 V With extra sieve decks11 (150 µm: 300 µm: 315 µm: 2x 1,00 mm: 1,30 mm: 1,40 mm: 2x 2 mm: 2 x 3 mm) 3 mm MaterialStainless steel 1.4404 (316L) Information MakeRitec Year of construction1994 Mounted on stainl. st. framecheck With switchcheck Floor space1,20 x 1,00 m Total height1,25 mVibro sieves-Sieves > Vibro sievesBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

General SKU410X1241 LocationBarneveld CEcheck MakeAzo Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Bag dump stations Hopper sizesø 800x600 mm Inlet800x500 mm Outletø 600 mm With vibro motor0,15 kW (400 V, 2650 rpm) Information TypeET 800 H VR No.1394703-01 Year of construction2018 Floorspace1,20x1,00 m Total height1,20 m Weight350 kg Extra SpecificationsBagdump station, volume 200 l., with vibro sieve, 2x sieve deck, nylon, : perforation 0,3x0,3 mm and 0,5x0,5 mm :Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Technical data Pressure: 4.5 kN Table surface: Length: 170 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 380 mm Width: 300 mm Height: 700 mm

General SKU397X1141 MakeDSP TypeEF800 No.WS-153 Mach.No.WS-153 Year of construction1999 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Nutsche filter/dryercheck Filter surface0.5 m2 Capacity400 l Vessel sizesø 800 x 620 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletcheck With jacketcheck Max. temperature165°C Cake capacity400 l Information LocationBarneveld Mounted on wheelscheck Floorspace1,52 x 0,8 m Total height2 mNutsche filtersDSPFilters > Nutsche filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

General SKU397W1234 MakeMinox LocationBarneveld CEcheck TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 With covercheck InletDia. 100/200 mm OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10695 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,50 m Weight180 kg Extra SpecificationsWithout sieveVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU397W1235 LocationBarneveld CEcheck MakeMinox TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10696 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,40 m Weight190 kg Extra SpecificationsWithout sieve and coverVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU337U832 MakeIpros doo Posoda LocationBarneveld TypePosoda 80 L Pressure Working pressure0 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.37 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity112 ltr Vessel sizesDia. 450x500 mm Dished bottomcheck Dished top sidecheck With covercheck DN 400 Top connectionscheck 30 mm Outletcheck 20 mm With jacketcheck Volume 17 Ltr. Max. temperature80ºC With propellor stirrercheck magnetic stirer Motor230/400 volt, 0,37 kW, 925 rpm Speed mixing shaft925 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.P342/04 Year of construction2004 Mounted on legscheck with wheels With switchgearcheck Floorspace0.78x0,78 m Total height1,2 m Weight290 kgStirring vesselsIpros dooStirring vessels > Stirring vesselsBrand > ...

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.

General SKUR1215 LocationBarneveld MakeDiosna (D) Main Features MaterialStainless steel Volume800 Ltr. Motor55 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 ltr. Vessel sizesdia. 1200x700mm With covercheck Inletdia. 250mm (1x) dia. 20mm (1x) dia. 100mm (1x) dia 50mm (1x) dia. 32mm (2x) Pneumatic operated outletcheck Outletdia. 200mm With motor55 kW 400 volt (Ex) Rotor speed127 rpm With lump breakercheck With motor13 / 16 kW 400 volt (Ex) Rotor speed1435 / 2930 rpm Information TypeP-800B Mach.No.294-009 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace2,7x1,9 M Total height2,9 M Weight5000 Kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine.

SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

General SKU203S014 MakeFilmac srl S/L Filtration (It) LocationBarneveld CEcheck TypeFiltropressa BC-800.40(35).25 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface33.6 m2 Specified Features - Filterpress Filter presscheck Filter surface38,3 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene Information No.91137 Year of construction2000 With switchgearas is Floorspace5x1,6 m Total height2 m Weight4500 kgFilterpressesFilmacFilters > FilterpressesBrand > Filmac What you can expect from Foeth: -- Machine is  ...

x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake Beyeler RT 80x3100 BJ 1992

Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.

We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. Refrigerator NOVUM, 805L

6 feeders, Hand feeder, Cover feeder, Stitching unit, 2x 52/8 stitching heads, Trimmer, Spare knifes, books tools and standard parts Machine nr: 08.004