rm 80 used for sale

control: Siemens Sinumerik 840D table load: 0,7 t work piece spindle speed: 200 - 2300 U/min total power requirement: 12 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t stroke: 6-60 mm no. of strokes: 90-550 Hub/min : 300 mm table surface area: 780x600 mm ram surface: 807x460 mm tool hole in ram: Ø 40 mm ram - range of adjustment: 80 mm total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2900x2000x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t stroke: 4-60 mm no. of strokes: 85-500 Hub/min ram - range of adjustment: 80 mm : 320 mm table surface area: 750x600 mm ram surface: 750x600 mm total power requirement: 31 kW weight of the machine ca.: 8,2 t dimensions of the machine ca.: BxTxH 2900x1900x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Working Hours: 250 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-aifo-8041-i-40-55-pump-used/1 7874, , = More information =, , Empty weight: 895 kg, Type number: 8041 I 40.55 POMP

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-8045se-pump-580-mh-used/17870 , , = More information =, , Year of construction: 1010, Type number: 8045SE POMP 580 M³/H

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Rated Power: 342 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 400 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 488 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/218737, , = More information =, , Type number: 80TCA GENERATOR 400KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 373 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 320 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 460 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/detroit-diesel-8v92ta-generato r-320kva-used/203, , = More information =, , Empty weight: 4.300 kg, Type number: 8V92TA 8083-7405 GENERATOR 320KV

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 410.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: WATERGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1900 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3412e-80m-1496 377-used/770, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 80M-1496377; Transport weight [kg]: 2500

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072

cutting diameter: 800 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 � ...

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - / Contact us at -

Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

BT pallet lifter, max. lift 800 kg to up to 600mm. In very good condition, excellent quality steel from Sweden.

MAX DIAM 250 MAX LENGHT 800

The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

MBO foldering machine T 800, config.: 6-4, built 2004, format: max: 78 x 120; min: 15 x 25 cm with Piab air system , serial equipment, slitting shafts in all units and manuals. In very good condition technically as well as folding rollers. More photos on request. Navigator control unit MBO T 800.1-1-78/6- first folding unit 6 pockets auto adjustable MBO T 800.1-2-78/4- second unit 4 pockets manual adjustable Can ship worldwide.

MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

Compressed air tank 5.3 m³, operating pressure 7 bar

Transnorm conveyor belt GF 22000-900-800 RA2186 Technical data: Conveyor length (NL): 22000 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, R27 DRE80M4/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 22000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor speed  ...

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

pressure: 75 t stroke: 250 mm daylight longitudinal/sideways: 800 x 215 mm dayligth: 170 - 885 mm working pressure: 7,5 - 8.5 bar weight of the machine ca.: 0,45 t dimensions: 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LVD TMSB 800 mm 3 grinding belts Type: precision grinding Max sandingwidth: 800 mm Min. size of parts: 130 x 130 mm Part thickness: 0,5 -- 110 mm Number of individual abrasifbands: 3 Main motor(s) power : 3 x 5,5 kW Nominal output: 19 kW Length L -- R: 1600 mm Depth Fw -- Bw: 2700 mm Height: 2000 mm Weight: 3000 kg Conveyor motor power: 1 kW Dust collector capacity needed: 11 500 m³/h

2. Other and Auxiliary Systems SNA-17. Transformer Systems, Room K 14, Transformer 2 units Cast Resin Dry-Type Transformer Type GEAFOL TG 4951H, Built: 1990 Manufacturer: AEG Trafo Union Technical Data: - 800 kVA - Voltage level 10 kV / 0.4 kV - Dyn 5 Find more here - / Contact us at -

C - bow is in good technical and optical condition

Sanding unit IMA Type: 08.062 - oscillating

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

New shredder Brand: REINBOLD Type: AZR 800 Special 22 kW The AZR series is known for its power. By means of the solid construction the machine also shredders bulky and bigger workpieces. Standard equipment: A row of round knives Ø40 mm with concave shape Turbo coupling Pusher Strenghed screen Switch cabinet with SPS control and 5 m cable Automatical switch-off function at empty container Safety package with gear box end switch and reverse counter Vibration damping machine feet GS-sign (dust tested) & CE-sign Technical data: Hopper opening: approx. 800 x 1200 mm Fill height: approx.1.610 mm Container volume: approx. 1,1 m³ Working width of the rotor: approx. 740 mm Rotor Ø: 354 mm Power main motor: 30 kW - 400 V - 50 Hz. - 3 Ph. Power hydraulical motor: 0,75 kW - 400 V - 50 Hz. - 3 Ph. Rotor speed: approx. 90 rpm. Number of blades: 20 pcs. round knives Kin ...

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   height above floor level: 700 mm SLIDE   table surface (left-right): 2000 mm   table surface (front-back): 2000 mm   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 400 mm/s   working velocity min.: 5 mm/s   working velocity max.: 160 mm/s   return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm   distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 370 kW   mains voltage: 400 V   mains freq ...

description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Watercooled chiller/Heat pump Climaveneta NX WN 802 251 kW/282 kW Cooling capacity: 251 kW / 71.37 tons (12/7 — 35°C) Heating capacity: 282 kW / 80.19 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Copeland ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 1.6x1.1x1.95 m Working hours: 124/102 h. Condition: Outlet

Manufacturer: Bürkle doppelseitige Struktur und Reinigungsbürste, Type: CGM 800, Year: 1984, Control: no, Monting of the machine: 2 X Anderlon 250 mm<CRLF>2 X Fibre, Number of units: 4, Engine power - kW: ca.7,5 über Getriebe Anderlonbürsten<CRLF>2 X 2,2 Kw Reinigungsbürsten, Diameter of brushes: 250 mm / 150, Number of rotations controlled: Struckturbürste, Working width mm: 950, Through running hight mm: 120, Struckturieraggregat: 2, Feeding speed continous adjustable: über Umrichter möglich, Year :1984

Manufacturer: Rippert, Type: HOW TK 8000, Year: 2000, Control: yes, Channel width in mm: 1400, Channel height in mm: 2050, Channel length in mm: 8000, Chain transportation system length in mm: 13.900, Thermal output: 32 kW, Max. air temperature: 30, Damper register - items: 1, Exhaust air m³/h: min 500, Lösungsmittelmenge g/min: 160, Year :2000

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010

Manufacturer: Jet, Type: JSS-3-6-44-800, Control: yes, Year: 2007, Filter system - negative pressure: yes, Volume flow rate m³/h: 99.900, Filter surface in m²: 800, Cleaning of scavenging air: yes, Electronic control board: yes, FREE TEXT: Breite 2950 mm Höhe 9720 mm, Year :2007