rk used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -ORIGA: PA60210-0050 -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 54 x 230 mm -Weight: 1.05 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 25 rpm -Power: 1.1 kW -Construction: B3 angle -Diameter shaft: 32 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 600/410/H410 mm -Weight: 97 kg

I sell a gear grinding machine with whole equipment, grinders, exchange gears and technical data. We are selling the machine only because we bought her for a project that we did not become. So that we didnt worked with the machine never, we do not know the condition of the machine and we are selling the machine in seen condition. On the machine is a balancing and a sharpening unit for the grinding wheel.

Wedge snow plow, snow plug, dozer blade, plow blade, snow blade -Manufacturer: Schulte-Henke, snow plow type RKS 200 DFG 4035 A -Shield length: 2000 mm -Plow height: 520 mm -with: spring flaps drive-over system -Recording: Dimensions see photo technical. drawing -Plow: mechanically adjustable -Attachment: on a forklift or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

General SKU300U1009 LocationBarneveld MakeLauda TypeRK 20 No.9292 / 504 491 Main Features MaterialStainless steel Heating (medium)Electric Capacity2.3 KW Temp.20 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck With coolingcheck Capacity2.3 kW Temperature -40°C to 20°C With temperature controllercheck With controlcheck Temperature control units Capacity2,3 kW Information Year of construction1987 Total height0,70 m Weight50 kg With switchcheck Floorspace0,43x0,47 m Extra SpecificationsWith MGW temperature controller, type RKT20: temperature range: from -40°C to 20°C: capacity: 2.3 kWTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold circular saw, metal circular saw, mitre saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 1000 mm -Max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Description: Max. machining width 1100 mm Tipologia Calibration Sanding and Finishing Working Table adjustable No. Operating units 2 Nr Max. machining width 1100 mm Work table yes height adjustable Forward feed belt yes with speed adjustment by NC yes max. forward feed speed 18 m/min Operating units 2 FOPERATING UNITS 1 Unit : roller unit : in steel OPERATING UNITS 2 Unit : Combination Roller-Rad unit : rubber roller Safety standard EC mark yes Total installed power 35 Kw Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Rohbi saw with loader saw blade diameter: 250 mm, total power requirement: 2 kW, weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 6,400 x 2,200 x 1,800 mm

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 430 x 140 x 140 mm, weight approx.: 70 kg

Plate size: 1500 x 4000 mmPlattenhöhe including ribbing: 370 mmStärke of the upper plate: 50 mmArbeitshöhe in the assembled State: 870 Mmweigth: 6.8 t

Plastic Box Bito RK3109 Used goods, see pictures Type designation RK3109 Basic dimensions L x W 300 x 117mm Height 90mm Color dove blue Internal dimensions L x W x H 260 x 94 x 80 mm Volume 2 l Load 6 kg Temperature resistance -20°C to +80°C Negotiation price: € 2,-- net per piece ex stock approx. 7500 pieces available, larger quantities on request. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company cle ...

Tank,rustfrit stål,mandedæksel i top,Scaba RK60 røreværk i top,Ø 2200 mm.

Plate heat exchanger,stainless acid proof steel,APV type H17 RKS-10 no.2,73 plates

Key data: 4

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Baykal APHS 3106X120 CNC Press Brake 120 Ton Number of axis : 3 Electronic panel has been renewed STEP RK12+ Touch Screen Control Unit Some tools are included

Description Moog hydraulic pump D954-0001 / G D954-5001/C HP-R18XX-RKP063KM28E1Z00 for disassembly

Description Moog hydraulic pump D956-0001 / F D956-5001/C HP-R18B1-RKP100TM28E3Z00DS1

feed pressure: 10 bar liter capacity: 1960 l/min Number of working hours: 8539 h voltage: 400 V total power requirement: 55 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1800 x 800 x 1200 m completely serviced in 2021 and immediately ready for use. incl. Renner refrigeration dryer type RKT CQ 0180 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Temperature controller WETRON WEIDA, EAW usamar RK 42 ( RK42 ) 138 14 43 209 000 000 0 - 899 °C Sensor: Fe/Cu-Ni 220 V AC 50 - 60 Hz IP40 / IP00 for front panel mounting: 91 x 91 mm New, with documents ! Dimensions ( temperature controller ): 220 x 96 x 96 mm Dimensions ( packaging ): 280 x 130 x 110 mm

Temperature controller WETRON WEIDA, EAW usamar RK 43 ( RK43 ) 138 14 43 209 000 000 0 - 250 °C Sensor: PT100 220 V AC 50 - 60 Hz IP40 / IP00 for front panel mounting: 91 x 91 mm New, with documents ! Dimensions ( temperature controller ): 235 x 96 x 96 mm Dimensions ( packaging ): 280 x 130 x 110 mm

Temperature controller WETRON WEIDA, EAW usamar RK 44 ( RK44 ) 138 14 43 209 000 000 0 - 99,0 °C Sensor: PT100 220 V AC 50 - 60 Hz IP40 / IP00 for front panel mounting: 91 x 91 mm New, with documents ! Dimensions ( temperature controller ): 235 x 96 x 96 mm Dimensions ( packaging ): 280 x 130 x 110 mm

Temperature controller WETRON WEIDA, EAW usamar RK 40 ( RK40 ) 138 14 43 209 000 000 0 - 499 °C Sensor: PT100 220 V AC 50 - 60 Hz IP40 / IP00 for front panel mounting: 91 x 91 mm New ! Dimensions ( temperature controller ): 140 x 96 x 96 mm

Centrifugal fan, centrifugal duct fan RUCK RK125L max. 330 m3/h impeller: Ø 180 mm pipe diameter: Ø 120 mm motor: 0,,07 kW 230 V AC 50 Hz approx. 1.8 m connection cable New ! Dimensions: 270 x 220 x 250 mm

Vane flow - sensor, flow monitor, with connection cable BÜRKERT FLOW 8012 HALL Flow rate: 0,3 - 10 m/s Output: 36 V DC 0.7 A ( NPN / PNP ) Base: 316L Installation dimensions: 120 mm Flange diameter: Ø 50 mm Inner diameter: Ø 25 mm Material: stainless steel, EPDM connection cable: RKT5-228/10 length: 10 m New ! with documents ! Dimensions ( sensor ): 120 x 70 x 80 mm Dimensions ( packaging ): 250 x 185 x 130 mm

Vane flow - sensor, flow monitor, with connection cable BÜRKERT FLOW 8012 HALL Flow rate: 0,3 - 10 m/s Output: 36 V DC 0.7 A ( NPN / PNP ) Supply voltage: 12 - 36 VDC, 4 - 20 mA Base: 316L Installation dimensions: 120 mm Flange diameter: Ø 34 mm inner diameter: Ø 16 mm Material: stainless steel, EPDM connection cable: RKT5-228/10 length: 10 m new, with documents ! dimensions ( sensor ): 120 x 70 x 75 mm Dimensions ( packaging ): 250 x 185 x 130 mm

Threaded rollers NAREX Type: M8-9 RK6-10 1x Threaded roller No. 1 1x Threaded roller No. 2 1x Threaded roller No. 3 Inner diameter: Ø 18 mm Outer diameter: Ø 30 mm Width:14 mm New ! Dimensions ( single thread roller ): 30 x 30 x 14 mm Dimensions ( packaging ): 70 x 50 x 40 mm

Technical data for the picking rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of shelves / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 12 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 2,100 mm high 610 mm deep 12x shelves, used Material colour: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / piece: approx. 4.78 kg max. load per floor at Evenly distributed load: 120 kg 04x Balance plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material colour: sendzimir galvanize ...

MAZAK SUPER TURBO X510 Hi PRO Supercharged laser cutting machine manufactured in 1999 in Japan, is designed for precision cutting of sheet metal made of structural steel, stainless steel and aluminium. The compact design with high stability makes the machine ideal for small factories as well as for series production. The MAZAK SUPER TURBO-X510 Hi-PRO Supercharged laser cutting machine has a large work table with a length of 3050 mm and a width of 1525 mm on which ball supports are used to facilitate the loading and unloading of workpieces. Workpieces with a maximum thickness of 20 mm are machined with the utmost precision using a stable 2 kW laser beam, guaranteeing excellent machining results. The machine is equipped with, among others, a MAZATROL CNC controller and SiCam 14.10 software for programming the cut shapes and generating the necessary files. The total weight of the machine ...

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer SEW type: RF53V D 80 N-6 RK -Gearbox manufacturer SEW type: RF53 RK1 -Motor power: 0.55 kW -Speed range adjustable: 4.4-26 rpm -Construction: B5 -Drive shaft: Ø 30 mm -Protection class: IP 44 -Dimensions: 580/400/H210 mm -Weight: 41 kg

Year of contruction / Baujahr: 1999. Power / Leistung: 9,5 kW. Sheet metal width / Blechbreite: 3.000 mm. Sheet metal thickness / Blechestärke: 6,0 mm. Overall dimensions / Abmessungen: 3.950 x 2.000 x 1.700 mm.

Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...

approx. 810 pieces, SSI Schaefer, 4 sizes Shelf boxes - second-hand - : Price ex location: only 1.950.-€ (net)! Only complete acceptance Manufacturer: SSI Schaefer Year of manufacture: unknown RK521B: 465 pcs. Length 490 mm Width 243 mm Height 115 mm RK621B: 75 pcs. External width [mm]: 243 External height [mm]: 115 External length [mm]: 590 RK521: 70 pcs. Length 508 mm Width 162 mm Height 115 mm RK500N: 200 pcs. External width [mm]: 162 External height [mm]: 63 External length [mm]: 490 Transport volume: 8 Euro pallets Condition: good Available: now Location: D

Manufacturer ENGEL Type VICTORY 330/150 TECH PRO Clamping Force [tons] 150 Manufacturing Year 2003 Screw Size [mm] 30 Number of aggregates 1 Screw Type WS10 The minimum height of the mold [mm] 300.0 weight [kg] 9100 installed power kW 47 length mm 5193 width mm 1700 height mm 2000 occupied area of 8.8 m2 occupied area with a cage 13.6 m² oil filter HC35 - SMX10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 6 CE document 49834 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-18 UDT external battery revision 30/04/2021 UDT internal revision of the battery 05.2023 UDT battery registration number N2328017536 MC49 robot (UTM-750 TW) Diagrams office E v Schematics office H v Machine diagrams E v Ma ...

Manufacturer ENGEL Type Victory 500/150 Tech Clamping Force [tons] 150 Manufacturing Year 2005 Screw Size [mm] 40 Number of aggregates 1 Screw Type TW02.1_650 D40 LD20 G1.2 WS8 1180 The minimum height of the mold [mm] 300.0 weight [kg] 9600 installed power kW 39 length mm 5196 width mm 1804 height mm 2333 occupied area 9.4 m2 occupied area with a cage 14.9 m² oil filter HC28 - SM10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 5 date of last oil change II.20 CE document 158323 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-10 MC43 robot (W 721-0303) Diagrams office E v Schematics office H v Machine diagrams E v Machine diagrams H v Control card addresses CPU 1 Analog 4 Thermo 0 Control c ...

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788) Make: Herr Voss – Wysong Material: CR, HR, Stainless, Aluminum Material Width: 12″ – 72″ Material Thickness: .030″ – .135″ (-030 – .187″ 60″) Weight Capacity: 40,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Direction: L-R Speed: 200 feet per minute Entry L-Type Coil Car Make: Sauer Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Make: Wean Powered Hold Down Roll Sliding Base Pneumatic Brake Feed Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Herr Voss 6-Hi Precision Leveler Year New: 1999 Model: VKL-84/2.187/19/7/6-Hi Work Rolls Width: 84″ Work Rolls Diameter: 2.187″ Number of Work Rolls: 19 Motor: 150HP DC Drive Inc Jet Coder Adjustable Hump Table Size: 75″ x 12′ PVC Paper with Static Charge Bar ...

Gebrauchter Kartonverschlie maschine APE bis zu 1200 Kartons Stunde Zuverl ssigkeit und Effizienz Die gebrauchte APE Kartonverschlie maschine steht als Eckpfeiler der Zuverl ssigkeit und Effizienz in der Abf llindustrie F r Hochgeschwindigkeitsoperationen konzipiert repr sentiert sie den H hepunkt technologischer Fortschritte Tats chlich erf llt sie die strengen Anforderungen industrieller Umgebungen mit Finesse und Pr zision Perfekte Versiegelung Mit akribischer Aufmerksamkeit f r Details konstruiert gew hrleistet der Verschlussmechanismus oben verst rkt mit Hei leim und angetrieben von einem Nordson Klebstoff eine perfekte Versiegelung Nahtlos integriert vereinfacht die automatische Eingabe des Kartontrenners den Arbeitsablauf Dies erleichtert einen reibungslosen Ablauf der Kartons und optimiert die Produktivit t in jedem Schritt Automatisierter Betrieb Der automatisierte Verschluss de ...

Reconditioned Caterpillar C15 long-block engine., Reconditioned with quality parts and delivered with 12 months warranty., Used engines available. Spare parts available., We build engines according to serial numbers of the old engines., Contact our sales on www.hamofa.be, , überholt, gebraucht, Teile, reconditionné, utilisé, pièces, reacondicionado, utiliza, piezas., , 6NZ 9NZ A3A B5R BEM BXS C2A EGH ENG FFH FFJ FFL FSE FTE FTH FTJ H5G HAZ JAS JDK JDN JDY JEP JJF JKG JRE KEM KRA L4L L4X LDN LHX M5F MBN MCW MG2 MXS N5F NXS P1K P1Z P3Z P4Z RKS RLA SDP SWE TRB TXG TXL TXY Z2C; Gross weight [kg]: 1400; Engine: CATERPILLAR C15