128,879 used machines on RESALE, but how to find them? Machine Search
Dematic belt conveyor Rising falling Incline with arch GF 2700-600-500 RA2372 Technical data: Conveyor length (NL): 2700 mm (2700 mm incline + 700 mm arch) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 1400 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Refurbishment possible Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1987 condition: good (used) Conveying length in mm: 2700 (2000 + 700) Nominal / outside width in mm: 600 Belt width in m ...
Knapp roller conveyor accumulation 24V 2700-1170-1110 RA2377 Make: Knapp Running direction: both directions Roller width (RB): 1110 mm Nominal/outer width (NB): 1170 mm Length: 2700 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Motor Roller conveyors: Interroll EC300 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Engine type: Interroll EC 300 Roll division in mm: 60 Jam detection: Lichtschranke Conveying length in mm: 2700 Nominal / outside width in mm: 1170 Stowage ...
Knapp roller conveyor accumulation 24V 2700-1110-1050 RA2378 Make: Knapp Running direction: both directions Roller width (RB): 1050 mm Nominal/outer width (NB): 1110 mm Length: 2700 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Motor Roller conveyors: Interroll EC300 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Engine type: Interroll EC 300 Roll division in mm: 60 Jam detection: Lichtschranke Conveying length in mm: 2700 Roll width in mm: 1050 Nominal / outside wi ...
Key data: 5000 kN, 80 mm
KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2
Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm
An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible.
There are five injection moulding machines Arburg available. 1) Arburg 320C 600-250, year of construction: 2001, operating hours: 83,365h. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h. 3) Arburg 270C 300-100, year of construction: 1999, operating hours: 78,784h. 4) Arburg 320C 300-100, year of construction: 2000, operating hours: 78,784h. 5) Arburg 270C 300-100, year of construction: 2007, operating hours: 59,885h.
cutting diameter: 225 mm saw band length: 2455 mm table height: 850 mm cutting width: 245 x 150 mm cutting speed: 45/90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 90 mm : 90 mm : 145 mm Impact energy: 145 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,2 t dimensions: 1,43 x 0,72 x 1,7 m Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L900xW685xH1680 mm | weight: 300 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
x-travel: 1200 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 2 x 2 m No. 4427 Universal tool milling machine DECKEL FP 4 L / 2707 Working area: 1200 x 400 Fixed angle table Control: 3-axis digital display Weight approx. 3.5 tons Space requirement 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compressor Brand: Turbo Tech Model: Til-2700 Capacity: 45 m3/min 250 kW 45 m3/min centrifugal compressor Compressor Stage: 3 Cooler Material: Copper Nickel Motor IE Standard: IE3 Motor Brand: ABB Main Motor: 415V/50Hz/3Ph, IP55 Inverter Brand: ABB Relative Humidity: 80% Inlet Temperature: 35°C Cooling Water Temperature: 32°C For any enquiry, please contact : 1. email: sfhotopglove.com.my 2. Contact number: i. Stephanie Ho: +6012-213 7761 ii. Aaron Tan: +6017-369 8203
Compressor Brand: Turbo Tech Model: Til-2700 Capacity: 45 m3/min 250 kW 45 m3/min centrifugal compressor Compressor Stage: 3 Cooler Material: Copper Nickel Motor IE Standard: IE3 Motor Brand: ABB Main Motor: 415V/50Hz/3Ph, IP55 Inverter Brand: ABB Relative Humidity: 80% Inlet Temperature: 35°C Cooling Water Temperature: 32°C For any enquiry, please contact : 1. email: sfhotopglove.com.my 2. Contact number: i. Aaron Tan: +6017-369 8203
DC Norris 2700 Industrial Wok Serial: 2827 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph
2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996
Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...
A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm
used
Manufacturer: KOMPTECH Model: NEMUS 2700 Year of Manufacture: 2022 Type of Machine : trommel screening machine Operating hours: approx. 3,000 hours Trailer-mounted, 2-axle, transportable Very good condition Used commercially Regularly serviced, maintenance logbook maintained Engine and technical data Engine power: 74 kW / 100 HP Fuel type: Diesel Engine manufacturer: Perkins Drive: Mechanical Operating weight: approx. 17 t TÜV valid until: 12/2025 Road legal approval Applications - Suitable for woody biomass - Organic waste - Commercial and industrial waste Equipment and features - Remote control - Hopper level sensor - Screen drums: 10 mm, 20 mm, 40 mm - Screening area: 30 m² - Standard paint finish - Throughput capacity up to 170 m³/h - 2-axle chassis - Hydraulic support legs - Connect system - Towing device - Hydraulically adjustable hopper pre-screen Find more ...
Key data: 3000 mm, 4000 mm, 1500 mm
Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.
Key data: 400 kN
Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our compa ...
Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis B and C Traversing in ax ...
Manufacturer: KraussMaffei Model: KM 350-2700 C2 Year of Manufacture: 1998 Type of Machine : Injection Moulding Machine Machine Weight: 16,000 kg CE Certified: Yes Find more here - / Contact us at -
CONTROLS CNC controls MOULD CLAMPING UNIT locking force: 350 to die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR) stroke: 150 mm INJECTION UNIT stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3700 mm space requirements -front/back-: 1300 mm total height: 2100 mm total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB3 units available
Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998
wooden rafters, timber, wooden beams, construction timber, solid wood -Height: 270 mm -Width: 210 mm -Length: 6300 mm Price: 105 Euro net/piece Quantity: 10 pieces Wooden rafters available -Length: 7300 mm Price: 115 Euro net/piece Quantity: 117 pieces Wooden rafters available -Length: 8000 mm Price: 125 Euro net/piece Quantity: 12 pieces Wooden rafters available
Electric cable winch, cable winch, hoist winch, construction winch, cable hoist, console winch -Handover: in the current condition as seen -Accessories: Winch lever is missing -Manufacturer: Pfaff silver blue, ALU console winch -Type: D 270001 -Wire rope: Ø 5 mm -Cable length: 9 m -Dimension: 330/310/H290 mm -Own weight: 19 kg
pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Manufacturer: SSI Schäfer, pallet racking boltless racking 6 bays / rack length 17100 mm -Field width: 2700 mm -Shelf height: approx. 3500 mm -Stands: 7 pieces 3600/1105180 mm -Cross braces: 30 pieces 2770/65/250 mm -Shipping/Price: complete -Transport dimensions: 3620/1150/H1050 mm -Total weight: 726 kg
used
Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector
B&A REF: 9302 TON: 270 SCREW DIAMETER: 55MM SHOT WEIGHT: 594 STROKE VOLUME: 653CM3 INJECTION PRESSURE: 2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Pressure reducer HOFMANN RK4D 15PN25 DN15 PN25 New ! Dimensions: 200 x 90 x 70 mm
- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %
10MMx1000m, 1x pallet with boxes Auction-ID: A1-43459-132
Expanded In rotating condition due to new motorization wirt sold and pictured
Three-phase motor, electric motor -Manufacturer: ABB Motori Type MU63BB11F75-2/MK129084-S -Power: 0.37 kW -Speed: 2700 rpm -Shaft: Ø 11 x 20 mm -Design: B5 -Protection class: IP 55 -Dimensions: 205/120/H150 mm -Weight: 4.3 kg
GRATINGS FOR PALLET RACKS 270CM/110CM SHELF PANELS DATA: Length per module : approx. 890 mm Width per module : approx. 989 mm total width : approx. 2670 mm total depth : approx. 1095 mm suitable for 2700 x 1100 mm shelf panels 1 level consists of 3 pcs. gratings Bezel : T-profile 42 mm Mesh size : 80 x 40 mm Load capacity: 1000 kg per grid, with evenly distributed load Surface : hot-dip galvanized New goods from stock —MULTIPLE AVAILABLE — Price: 189,00 € Net plus statutory VAT. You will receive an invoice with VAT.
Electric motor, three-phase motor -Power: 1 kW -Speed: 2700 rpm -Shaft: Ø 14 x 20 mm -Construction: B14 -Protection class: IP 54 -Number: 2 motors available -Price: per piece -Dimensions: 240/137/H174 mm -Weight: 7.5 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.270 mm - 160x60x2mm Properties: - Length: 1,270 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,270 mm Information without guarantee Properties: Length: 1,270mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Position sensor, displacement sensor MTS Temposonics TTM-RB-M-0170-8 Gauge length: 270 mm Measuring rod: Ø 10 mm thread: Ø 18 mm used ! Dimensions: 360 x 54 x 46 mm
Machine table PAGUS base plate 250 x 270 mm table: 260 x 100 mm Fahrberich 100 mm Dimensions: 530 x 400 x 170 mm
Three-phase electric motor SEW Type: DFT80K4/2BMG/HR/Z with brake Power: 0.4 / 0.63 kW New ! speed: 1380/ 2700 rpm voltage: 400 V frequency: 50 Hz degree of protection: IP55 design: B5, flanged
Swivel module FESTO DSM-40-270-P-CC 161749 Pmax: 10 bar Dimensions: 245 x 150 x 150 mm
Welding table, straightening table, straightening plate, work table, clamping table measuring plate with measuring stand, measuring table PAGUS work surface: 300 x 270 mm working height: 50 mm tripod height: 275 mm with measuring stand Ø 12 mm ! Dimensions: 300 x 270 x 330 mm
Pneumatic swivel module FESTO DSM - 40 - 270 - P - CC 161749 p max 10 bar New ! Dimensions: 170 x 130 x 130 mm
Universal clamping table, swivel, tilt and swivel table, T-slot plate PAGUS clamping surface: 630 x 270 mm 5 grooves groove width: 12 mm table can be tilted back and forth from 90°, tilted back and forth by 30° table can be tilted left and right by 15° and swivelled to the left and right by 45° New !' Dimensions: 650 x 290 x 290 mm
1x type 270 M 500-210, 1x type 270 M 350-90 Auction-ID: A1-43992-59
- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet
maximum number of results exceeded
please refine your search
15 € 
